I have a very lightly used, less then 400 rounds of Sk rifle match, Vudoo 360 Bartlein 22” MTU threaded.
Was used by an older gentleman that shot a match and decided it was too much movement.
$sold with out trigger

I picked this up for a 6.5 PRC I built, but no longer have. 3 rounds fired out of the 8lb keg.

$375 $350

I'm West of Fort Worth, willing to meet around the DFW area.

Got a buddy looking to move to Grand Forks and he wants to get into PRS/ELR shooting.

Any suggestions for ranges to belong to that have good long range facilities?
Are there any matches in the area?

Sure seems like there is a lot of space, not a lot of back-stops. Cold enough in winter for negative DA?

Scope is in great condition with 4+ years of warranty left

I have flip covers front and rear

Location Crandall - Greenville Tx if local

$2850
Shipped
I have several batteries available to go with the unit 10$ each

I have 108 pieces of 1x fired Hornady brass and 19 pieces of Norma brass.

$75 shipped.

Selling my brand new S2 delta magnesium chassis with machined ARCA Rail.

Short action, rem 700 footprint

550 shipped or best offer, lower 48

This chassis is the complete magnesium light weight option.

Chassis only, the barreled action, bipod or scope is not for sale

Hey all,

I have a brand new still sealed set of 34mm High (1”) Seekins Precision rings for sale.

$90 shipped

Thank you

Very nice AR in 6mm Fat Rat (Lee Wells/Accurate and Reliable) with fluted barrel, PRI carbon handguard, full length one piece top rail, PRS stock, Geissele (I think SSA)trigger, JP FMOS bolt carrier and HP bolt, JP Silent Capture Spring, SLR adjustable gas block, 5/8x24 threads, 70+ loaded fireform rounds, 120+ fireformed brass, Whidden dies. Only has 120 or so rounds on the build…...scope, rings, bipod and brake/suppressor not included. The 5x25 US Optics B25 EREC scope with H59 (serviced by USO last year and not shot since) with rings is available for $1700 shipped.

Trades considered….
Foundation or Manners stocks for Impact 737/rem 700 actions
Impact 737 AW cut
SB PMII scopes
Thermal scope or clip on
AMP annealer
Autotrickler
Bix and Andy trigger
Anschutz model 54 or Match/Super Match 22LR

Just thought I'd toss this out there. I have repeated a lot of mistakes that I should have known from experience not to, so I made a list for myself to post over my bench. Some will get folks' feathers ruffled - they shouldn't, these are for me, if you don't like them, then by all means you do you. Keep in mind Im purely a recreational/hobbyist shooter not a competitive shooter. Hopefully some of it resonates, and may help some of the Newbies from making costly mistakes that I have made over the years in terms of time and money.

• Don’t load for speed and compromise brass life & safety
• Don’t load for 100 yard accuracy and ignore velocity SD; it catches up to you downrange
• If you’re anywhere near a max load without pressure signs and you have good accuracy (1/2 MOA) & velocity SD (<10), STOP. That’s your load.
• Don’t ignore pressure signs or engage in wishful thinking; when the bolt or the brass speaks to you, listen to it.
• When working up a load without a lot of available data, use 15 cases over and over so if you go overpressure and blow the pockets, you limit the damages. Pulling bullets and dumping charges is a serious buzzkill
• Don’t skimp on components or mix and match; That means Lapua, RWS, Alpha brass unless it's not available. Your factory ammo once-fired brass may be a bargain up-front, but the lack of consistency and longevity compared to Lapua down the road will have you regretting it
• Don't use temperature sensitive powders unless you have no other choice or are not shooting long range. This means most of the Alliant powders.
• If you have done everything right and have a good, consistent load but have a bad day shooting, don’t reinvent your load. You settled on it, after much toil, for a reason. You just had a bad day.
• Never skimp on your barrel. It is the one thing you can't change easily, and if you burn up 300 rounds in load development trying to get a turd to shoot, you're out all the time & $$$ of "load development" AND the "cheap" barrel
• Don’t stockpile brass – good cases last 10+ firings. A couple hundred cases will get you to your next barrel
• Shoot a batch of 100 cases until it’s toast before dipping into new brass; 100 toasted + 100 brand new cases is worth more than 200 once-fired cases, when you change something and try to sell it
• Don’t leave excess lube (especially lanolin) on your cases; it will attract dirt and gum up your chamber (and cause pressure spikes). Wipe it off with a rag dampened in a gentle solvent.
• Don’t waste time with tedious manual tasks of dubious benefit, e.g., cleaning primer pockets every firing, deburring flash holes, turning necks, measuring runout, measuring primer seating depth, weight sorting anything. Especially things that must be done every reloading cycle. Use that time to shoot and have fun and refine your skills
• If you’re spending more time reloading than shooting, you’re spending too much time reloading.
• Do things in large(r) batches whenever possible to save time reconfiguring equipment and for consistency, e.g., annealing, brass cleaning, trimming. Batches maximize consistency
• If it doesn’t shoot, it’s either you, the barrel, the bullet, the powder/charge, or the seating depth. It's not the primer. It's not the fucking primer.
• If you’ve changed a variable 5 times and the problem persists, that variable is not the problem.
• Guys never post pictures of their worst groups and velocity SD. What you see online is cherry-picked and unrepresentative of the average. Don’t chase somebody else's unicorns.
• Don't cherry-pick your own data/results. You will be reinventing your load after the next session shows regression to the mean.

I recorded this video after chambering another big name barrel in the premium barrel world that had quite a bit of run out. To be fair the other barrel shot exceptionally well and on par with what we have come to expect. The run out does not make a difference in how it shoots but makes my life easier when indicating a barrel in. Please forgive my attempt at humor in the video description.

Login to view embedded media

I annealed it, it's brand new.

Nice used Leupold Mark 4HD 8-32x56 with PR2 Mil Reticle .........Had a couple months and used in couple matches but ended up with another Mk5 so this is an extra ......comes in box with cover and allen wrench with manual as well .........sold shipped ......

Like new, with box and all original pieces. No trades.

$1225 Shipped (F&F, buyer to pay fees if we go that route)

All as new, perfect glass, no marks, best low light scopes around.

1-Leica ER 3-15x56 (model 51074) MOA with BDC reticle, no box non illuminated $725 shipped

SOLD 2-Leica Amplus 6 2.5-15x50i (model 50311) Mil Ballistic BDC illuminated reticle, no box $825 shipped SOLD

SOLD 3-Leica Amplus 6 2.5-15x56i (model 50411) Mil Ballistic BDC illuminated reticle with box $875 shipped SOLD

SOLD 4-Leica Amplus 6 3-18x44i (model 50201) MOA with L-4w BDC illuminated reticle with box SOLD

Would trade for Henderson Gen 3 Trimmer

Money order/Check til clears
PP FF/Venmo

For sale is a lightly used Foundation Centurion Stock. It has the full lead weight kit as well as the new arca Swiss rail from the Sampson that increases rigidity vs the older style anchutz. Comes with Hawkins M5 bottom metal. Dark distressed is the stock color. Cut for an Impact in short action.

Howdy,

Looking for a Leupold MK 4 3-9x36 (TS-30) to finish a clone build. Thanks!

Best,
Clark

I have two boxes of 50-count virgin 6mm ARC Hornady brass – for a total of 100 pieces.
$60 shipped

Sold

Just wondering if there`s any consensus (?) . Thanks.

Just published a new video on Understanding Muzzle Velocity: https://youtu.be/8tnTYE0b3J4

Muzzle velocity is an important variable for long range shooters. This video covers some key concepts for beginners and also goes into some advanced topics that are not normally encountered to keep it interesting for experienced shooters as well.

Chapters:
00:00 Intro and Motivation
04:28 Statistics
11:19 Sky Screen Chronographs
25:29 Mangetospeed
29:11 Magnetospeed - Advanced
39:26 Radar Chronographs
48:34 Truing Muzzle Velocity
54:06 Summary

Enjoy!
-Bryan

Good morning all. I sent in a B25 for warranty service. It was received at the factory on October 15th. Prior to this, I had never had a problem with getting ahold of tech support or customer service by phone or by email. I always had a response withing 24hrs. They suggested a 4-5 week turn around for the repair. Its been 7 now and I have not been able to get ahold of anyone, by phone or by email. Has anyone heard anything about the company in general recently?

Looking for a set of vector x 10x or 12x with magnifiers. Let me know what you have! New or used.

Hey guys,

I have an early to mid '60's vintage Remington 700 split sear trigger with the tall tombstone safety available. Would be perfect for an OG M40 or maybe an early M40A1 spec build. Had picked this up for my M40 build but stuck with the early 40X trigger that came with my action so this one is up for grabs.

$90 shipped USPS Priority mail
PayPal, Venmo, CashApp accepted

Selling a used in great shape nightforce 7-35 with mil XT (MRAD) reticle.

I have used this scope for a couple matches but luckily doesn't have much wear at all. The windage cap has a couple small marks but that's all I can find cosmetically. Mechanically these scopes are tanks and I have not had a single issue with anything.

Please ask if you have any questions about the scope.

For fastest response please text me at 636-297-5055.

Selling for 2600 shipped

Thanks!
Ben

.300 RUM 20" Proof Barrel, Zermatt Origin action, Manners Pro Hunter carbon stock, Triggertech Special Two stage Trigger, bottom metal is unknown munitions. Shooting 180gr hammer bullets out a 20" barrel at 3,156fps! Chamber by straightjacket armory, cerakote by snake River cerakote, has less than 100 rounds 4000 shipped no trades