Dan Wesson Vigil Suppressor Ready 1911 in 45ACP

They don’t make these anymore to my knowledge, and I’ve shot less then 300 rounds through it and a great suppressor host.

Upgraded grips and still have the original box and I’m pretty sure 2 mags.

$1450 shipped PP F&F

Trades; looking for a SA hunting rifle like a 308, 7-08, etc. prefer and older 700 or even a Tikka.

Would also consider a Bighorn Origin SA

Looking to trade my Vortex Razor HD Gen II 4.5-27X56 FFP EBR-7C MRAD for a Leupold Mark4HD. Preferably 6-24 with the PR3MIL. Razor is used but good condition, got it off the hide early this year and the windage cap has some wear on the slot which is shown in the pictures. Has box and everything from factory along with scope caps.

Does anyone have any information or experience with a Northwestern Precision LLC short bolt action? I called their shop and spoke to Chuck McIntosh who said he manufactured the action but stopped making them about 10 years ago and had maybe made a few hundred of them. It is manufactured in Gillette WY. Any additional info from more experienced members would be great. Thank you.

Used barrels for sale. These barrels are still accurate enough to shoot targets with.

No problem shooting these barrels out to 900 yards. Final sale, the chambers and bores look ok, I do not have a borescope. Priced accordingly.

Please let me know if you have any questions

PayPal F&F
Venmo

Price includes shipping to lower 48 states only.

Thanks for looking



Barrel #1

• Lone Peak Fuzion
• 26” Bartlein 5R - 6mm BR
• Chambered by GA Precision
• 1:7.5 twist - 1.25” straight contour
• 5/8x24 muzzle thread
• Approximately 2k rounds
• Still shooting AVG 1/2 MOA at 100 yards
• 107 SMK - Alpha Brass - Varget
• MV - 2850 fps

FOR SALE as is ———— SOLD





Barrel #2

• Impact 737R
• 26” Hawk Hill - 6mm Creedmoor
• Chambered by L3 Rifles
• 1:7.5 twist - Heavy Palma contour
• 5/8x24 muzzle thread
• Approximately 1200 rounds
• Still shooting AVG 1/2 MOA at 100 yards
• 107 SMK - Alpha brass - H4350
• MV - 2950 fps

FOR SALE as is ————- SOLD

American Precision Arms brakes for sale

Little bastard -sold
-

Gen 3 Fat Bastard - sold shipped
- Nitride finish
- 6mm cal
- 5/8x24 thread
I do not have the set screws, but I’m certain APA would send some to you.

These brakes are obviously used. But they still get the job done.

Lower 48 states only

PayPal F&F
Venmo


Thanks for looking

100 rounds of factory Hornady .308 155 TAP. No packaging. Case included

$100 shipped.

Best action movie of all time is currently free with ads on YouTube right now.

Login to view embedded media

Looking at these two for a 16” gas gun.
With military pricing I think the Vudu is $80 more or so.

Any reason to get one over the other? I’ve never had a eotech or Trijicon scope.

Tuesday /2023 . released streaming July 2024 .
watched HBO . Main Character, Julia Louis-Dreyfus . Very original story, and piece of film work. is worth the watch.
.

Looking for a McMillan A5 variant or ARC Xylo Right-Handed, Short Action, to put a Tempest Action in.

Ideally cut for KMW Bottom Metal, in BLACK SWIRL, McWoody or any Color MARBLE SWIRL.

I was going through my bookmarks. I came across a couple that were great references at one time, but they have not been updated. Which ones do you all wish would be rejuvenated?

Speer Gold Dot 147= $60 per 100 or $165 for all 6 boxes.
Speer G2 147= $OLD for 3 boxes

$300 for all 9 boxes.

I may have some G2 Gov't marked white boxes left.

Shipping amount will be negotiated.

Only shipping to states where legal to receive.

No Trades.

Like new condition. Functions perfectly no dead pixels. I tired it on my 22lr as a clip-on in an indoor range at 25 yards and it almost hit the same hole that my regular scope shot. Coti-capable.

$3600 shipped/insured.


PayPal Zelle Venmo. F&F or G&S +3%

MDT Elite Scope Rings Tube: 34mm, Height: 1.00 (Med) - lightly used **$220 Shipped
Vortex PMR, 34mm tube, Med (1.00) - New - SOLD
Nightforce Ultralite rings, 30mm tube, Height: 1.00, comes with bubble level cap - SOLD
Paypal F/F, Venmo, Zelle

# 300235
New condition, never mounted.
3 MOA

$170 Shipped to you.

,

Brand new, never mounted.

$245 shipped to you.

For the experts on here - do you guys figure out what COAL your chamber likes first, and then test powder loads at that seating depth, or do you pick your powder load and then test varying seating depths to dial it in? It doesn't seem like you can work on both at the same time - or can you?

Looking to trade my ssa-e for ssa trigger. Might have 20 rd on it

WTS/WTT 250 count new 300 saum brass $350/250 count box shipped

Will entertain trades, stocks, 22 LR trainer, optics, actions

MDT XRS enclosed forend 105277
Never used still in the box.
Shipped to you $150.

I have one 10x12 plate and carrier combo left. These are nij certified 3+ plates and my plate carrier that I had a company modify for me.

Plate carrier has 3 pistol magazine holders on each side.

PM with any questions or you can message me for phone number for more details.

Plates are 6.4 lbs each and are shooters/swimmers cut with frag mitigation coating.

I also have SAPI cut on the way and level IV.

Carrier colors on the way are Coyote, Ranger Green, Black Camo and more Multicam.

PRODUCT INCLUDES
(2) LEVEL III+ Armor Plates (SAPI back plate, your choice of front plate)

FRAG MITIGATION COATING/CURVE
.25” (1/4”) frag mitigation build up coat
Fully encapsulates any fragment
Plate curve to fit body
Zero upsell for something that should come standard

3 PLATE SIZES/3 PLATE CUTS
8”x10”/10”x12”/11”x14”
SAPI/Swimmers/Hybrid R/L

2 STEEL CORE TYPES
AR500 Standard Steel
AR600 Lightweight Steel (-5 lbs/set)

$279.99

Used Velocity trigger MPC
Will include the other trigger shoe.
$100

Just received it from Nightforce Checked out 100% as new comes with extras has the moar ret.
$2000 shipped conus priority

I am not new to shooting. My hobby has been collecting and restoring old guns primarily military. I built several AR - 15's with no real issues. I recently built an Aero AR-10. It has an Aero lower, enhanced upper, high pressure bolt, rifle length buffer tube and buffer, aero lower parts kit and a rifle length gas tube 15.5 inches long. All the parts are purchased from Aero Precision with the exception of a Rage trigger and a Criterion 308 heavy match grade barrel 22 inches long and a 1 in 11 twist. I am using a Magpol 10 round magazine.

I carefully assembled the rifle after watching many You Tube Video's. The Criterion barrel has an indent for the set screw on the gas block. For the break in period I fed the gun one round at a time. The gun will eject the spent round about 5 o'clock and will not stay open. When I load the magazine the gun will eject the spent round but will not put a new round into the chamber. I have used 308 hunting ammo, LC 7.62x51 and hand loaded ammo. At this time I have 80 rounds through the gun and have cleaned it several times. I still have a single shot. any suggestions.