Ares ETR UHD 4.5-30x56 MIL reticle scope (212107 APRS6) wrapped in Seekins Precision Low (.92) rings with Anarchy Outdoors Throw Lever.

This optic was used exclusively on my CZ 457 (sold in previous post) for less than 500 rounds. It doesn’t have a single blemish or any sign of use as the rifle never left my home range. Will ship complete in original box with paperwork, etc. I have no use for the rings or throw lever so looking to sell as a package.

$850 shipped

Not like the others?
Post it here.


My MCX got a few changes after I got the updated carriage assembly.
Swapped out the skeletonized fix length folder for the kinder gentler collapsible.
Swapped the T-2 Micro out for the Strike Eagle in a Spuhr mount.

[IMG2=JSON]{"data-align":"none","data-size":"full","src":"http:\/\/i.imgur.com\/sbh2soV.jpg"}[/IMG2]

Works great, small scuff on the hood may scrub off with soap & water. Will ship with o.g. box and manual.Payment preferred Zelle&venmo

Thanks.

So just seeing what others are doing. I have a 6GT Prs rifle and I recently picked up another action to go along with a previous 6.5cm barrel I was using. For those that have two Prs rifles. Do you set them up the exact same or do you set them up differently? Different chassis/stocks, optics etc.

Or the other option is if you have two precision rifles and they are different; is one a prs and one a nrl or what purposes?

As new, flawless condition, not a mark on it. Scalarworks LEAP 34mm - 1.93" height mount. $SOLD shipped.

Let me know if you have any questions or would like more info.

Leupold Mark 5-25x56 PR2 FDE with IDTS turret tape and like new Leupold Mark 4 rings (high). Scope is in great condition (light rosin around the scope where the rings were, easy to get that off). No scratches or marks. Comes with everything it came with factory.

SOLD $1685 CONUS. I can take a card or Venmo/PayPal discrete. Thank you.

Also, please don't comment on my post (scammers will message you). Just send me a PM. I will go off timestamps. If you would like to talk over the phone to verify or FaceTime, no problem!

BNVD-SG green phos elbit gen 3 tubes

Low hours, crystal clear tubes, no blems.

I can send videos if you shoot me a message, no longer have the spec sheet.

6500 w/opscore skull crusher and dove tail mount

Would trade into an AI. +/- cash



I have a coti and an LA5 as well if interested.

Hey guys, trying to get into PRS so some of my fun stuff has to go.

STI DVC Carry in 9mm
Less than 500 rounds
Everything original
Carried a little bit mostly a safe queen

2900 cash
3000 trade value

Trade interests are nice r700 SA patterned barreled actions 308 bf / 6.5 Creedmoor, 6 GT, 6 Dasher, etc

I would also consider a nice piece of glass w/ hours or tremor reticles

Peterson brass. 390gr hornady a-tip loaded 375 ct. $450 shipped for 75 rounds

Helping put a rifle package up for a friend of mine that is taking a trip out west this fall. He's more of a hunter than a shooter so he was leaning on me for the setup. With that being said he isn't going to be reloading either. I have been wanting to try some of the 180 Norma Bondstrike projectiles since last summer but they have been unavailable. In the process of ordering some ammo for his rifle I did see a couple boxes of their 300 PRC ammo using that bullet. The bullet on paper has some great specs but I'm perplexed by the loaded length of the cartridge. The OAL of the Norma is 3.345 while a compared 212 ELDX is 3.634. Granted this is a larger projectile but just wondering why? I have a hunting round that I use 180 Berger's loaded to 3.605 for the 300 PRC with great success. Just wondering what that jump may do to accuracy?

Got a new MPA BA PMR PRO II in 6.5 Creedmoor with a 26" barrel coming in a couple days and I'm looking for some ammo to start with.

Thoughts?
Hornady 140G ELD-M $1.70 a round
Federal Gold Metal Berger 140G $1.67 a round
Federal Gold Metal SMK 140G $1.55 a round

I'd prefer just buy a bunch of ammo to save on shipping and call it a day is there a consensus on what would be best?

Thanks!

BNIB LEUPOLD 6-24X52. M5C3 reticle.

$1100 OBO Paypal ff or venmo

NL PURE 14 x 52. Less than 6 months old great condition $3000

Hello all,

I'm very new to the world of precision rifle shooting but not new to shooting.

I previously shot in local USPSA events. Lucky enough that there are two ranges within a 30 minute drive from my house that host matches each month.

I also did icore shooting with my wife since she enjoys revolver shooting more than semi autos. We also do target archery and my older son (6) does archery with us. Hope to get him and our younger son (2) into target shooting as well eventually.

My work schedule has finally settled down to where I can have some time for myself to go out to the ranges again for significant time.

I'm absolutely drawn to the challenge of precision shooting. I'm in the preliminary steps of figuring out what I want to do and budgeting out so that I can buy once cry once within my budget.

Thanks and have a great day,
Alex

So Geissele recommends using Electric Contact cleaner on their triggers then using compressed air to blow excess off following this with clp. My question while probably dumb as hell is this, I can only find Quick Dry Electronic Contact Cleaner (QRC brand) Is there any difference in this and other Contact cleaners? Just want to make sure I don't screw up and expensive ass trigger or the finish on my DD V5. I know I'm probably over thinking this way to much but, you guys on here have some major knowledge and I'm here to learn.

I’m curious if anyone has bought the RR version of these and run them without the end brake attachment? I was wondering if it’s worth having the RR version for earpro shooting target sessions but then having the option to leave the end off for maximum suppression, say hunting with my kids?

https://mcleodprecision.com/products/xero-sled-v1

$89 shipped complete ready to use.

Machined from 6061-T6 completely in my shop here in Northern Arizona. Comes complete ready to use including the ARCA clamp. Graphite Black Cerakote applied for finish. 8oz weight without the Xero installed. .350" thick and very stout. The ARCA clamp is inset to prevent shifting. The Xero can be rotated slightly on the mount if needed.

Mounting holes are provided if you decide to remove my clamp and install your own. Maybe you have a dual PIC/ARCA clamp like the RRS BTC PRO. You can verify your clamps fits by measuring the center to center hole spacing is 1.1" (ARMS-17 pattern) and the width of the clamp (center line of holes to edge opposite the lever or knob is no more than 1.280" which is an exact measurement no fudge factor). This fits a pretty large clamp. The holes are tapped 10-32. Please reach out with any questions.

V2 update - added in 3 center holes tapped 1/4"-20 so you can thread in your mini Xero Tripod or anything else interesting. Also check out the Kestrel Mount which clamps into the existing clamp on the Xero Sled and now you have a great benchrest setup or for your other non ARCA setup rifles.

Please check out our other products as well! https://mcleodprecision.com/ Thanks for supporting our small business!

Kevin

$55 includes shipping.

Buy at this link on my website
McLeod Precision - Bag Rider V1

Details:
CNC machined 6061-T6 Aluminum and Cerakote finish matched to the factory black.

Flat bottom with full radius edge for ideal tripod rear support engagement. Top surface has grip ridge texture to it (smooth). Does not stick out at all presenting any snagging surfaces. Tapers to match the grip support width. All other edges have a radius and are smooth.

Attaches with 2 MLOK fasteners (provided) into the MLOK slot on the bottom of the MDT rear stock. 4.9oz weight.

Tested by a top 10 PRS shooter. Everyone is happy. Get yours now.

This ONLY fits the MDT ACC Elite chassis, the bag rider matches the angles on the ACC Elite and would not present correctly on a different chassis.

These are shipping now. Let me know if you have any questions.

Thanks,
Kevin

Pictures first....




Full details and available for purchase at
mcleodprecision.com

Kestrel Mount -
Optics Bridge -
Xero Sled V2 -

Thanks for looking at the new stuff. Everything is in stock. Let me know if you have questions. (Fully Loaded version seen below)

The green flag was....
There's no replacement for displacement is outdated.

I have a mild cam in an Olds 474 cubic inch motor. 495 ft lbs and 425 HP.

It sounds like a big block should. I am old school and just can't drag myself to put fuel injection on it. Would it help? Most definitely but I like carbs.
That said. I am not going to bash the young crowd with the turbos and the 4 or 6 mills. Hell, when the Grand National came out I wanted one. I had a 400 HP 355 in a Camaro at the time. It was getting smoked by a six banger and I wanted one.

Anyone have any info on the Winchester Model 70's and Remington 700 configurations that the FBI built for their snipers? I have the Vanderpool book and was looking for more info or pics. I'm also interested in the FN guns.
Thanks!

SPF

EFLX mini reflex sight, 3 MOA black
Brand new in box

$220 shipped

Matte black - night vision - 7.5 MOA delta (triangle), DPP

Brand new in box, never mounted or used

$300 shipped

Good afternoon fellas! I've been eyeballing the Guide TB630 LRF and Athlon Cronus 35CL-640 for Coyote hunting and shooting heat treated steel for night shoots. Just by looking at them I can tell they are both very similarly manufactured but the specs vary a bit. It looks like the Guide TB630 has a 1920x1080 pixel display while the Athlon Cronus has a 1280x960 resolution. Now with the sensor resolution being equal (640x512 @ 12 microns) am I right in assuming that the 1920x1080 screen will be a lot better when optically zooming in? I'm still fairly new to thermal, I have a BAE UTM that I love and works great but I want to buy another clip on. Thanks in advance for any input!

$300. Good idea. I don't have a single TT set at the very bottom, and wouldn't miss the 4oz. I wonder how much tougher the higher tolerances get.

In any event, I'd look at this trigger for my next build...