Weather looks bad for a scheduled hunt on Monday. Rain in the morning the thunderstorms in the afternoon. I’m assuming they will be moving in the morning to the feed piles…. Good or bad idea to still go?

Wasn't he in a El Salvadorean prison?

Login to view embedded media

Like new barrel made by Criterion Barrels - this is prefit for the Origin action or Solus. I purchased this last year and kept it as a spare barrel. Has approximately 20 rounds down the tube. 26" - Varmint contour SS - muzzle thread pitch 5/8" x 24.

SOLD $280 CONUS. I can take a card + 3% or Venmo/PayPal discrete. Thank you.

Also, please don't comment on my post (scammers will message you). Just send me a PM. I will go off timestamps. If you would like to talk over the phone to verify or FaceTime, no problem!

Login to view embedded media
Login to view embedded media
Login to view embedded media



Sooo…


Along with “Civil Asset Forfeiture,” which was recently in use…

We now have this.

More nonsense heaped on top of the already intrusive yet ineffectual GWOT interventions.

“Ohhh, it only affects foreigners.”

Suuure…

It's ALREADY affecting Americans.

They want to search your phone or tablet - should you refuse, it’s seized for “further evaluation.”



There are many other amendments beyond the 2nd, just saying.

We think we're patriotic championing the said Amendment, but are probably simply too ignorant to pay attention to the rest

It’s a slippery slope, and we’re rapidly heading there…

That's a mouthful - full c1 max setup for the low low.

It's been mounted/paint marked. They finally came out with a direct mount for the fix, only reason for selling.

C1 (1.3" in height 20 moa built in) max in tan, clif 9 slot in tan, cap in tan.

Would like to sell together - $400 ppff or Venmo.

Noob here, with noob question: I've read I should set my shoulder bump to -.002" from fire brass length. Well, on checking my die setup, I'm at -.0015"...should I bother chasing that last-.0005"?

Login to view embedded media
I can sorta tell that she’s watched Carl Zha’s podcast, based on the examples that she used…

Login to view embedded media


But did she watch this cartoon and use it as an example?

That would be amusing

B5 collapsible precision stock. Medium cheek piece. FDE color. $140 shipped.

Vortex Strike Eagle 1-8x24
Leupold Scope Mount
First owner; used once
$350 shipped

Safariland Liberator 2.0 Hearing Protection
-TCI-LibHP-2.0-Blk
-Black
-Over-the-head suspension

$359msrp

I have 2 sets already, don’t need these 2.

$280 for 1
$520 for 2

This has been hanging out in the pile of potential future build parts for a while and I just don’t think I’m going to get around to using it.

Proof Research Blank
20”
.264
1:8
Carbon Fiber
#105504

$650 shipped

Cross machine drt 13” mlok rail. FDE color. Brand new. $100 shipped.

LG 404 laser grips for officer/compact 1911

$125 shipped

I'm having a hard getting consistent bullet seating depths and was looking for any advice or suggestions. I'm reloading 6x47 Lapua on a Redding T7 with Whidden custom dies. New Lapua brass, and bullets are Berger 105gr Hybrids, all from the same 100 count box. I'm measuring them with a Hornady Lock n Load Comparator on a set of calipers, with the comparator insert that gets me closest to the ogive without sliding over it. I'm making sure to use the same speed on the upstroke, the same pause at the top, and the same speed on the downstroke from cartridge to cartridge. However, just using my last six rounds as an example, the cartridge length (case base to the compartor's position slightly above the bullet ogive) was two at 2.050, three at 2.051, one 2.052, and one 2.053. Any advice or suggestions would be most appreciated.

Thanks,
Ted

Excellent condition Geissele 16.5inch super modular mk-18 rail and barrel nut. Integrated arca rail. DDC color (like bronze FDE). Barrel nut included. $275 shipped.

I have the following for sale. PM me to purchase. Responding here invites scammers.


MDT Send-It Level, Integrated Pic Mount (Rev 2), New - $225 (1 available)

MDT Send-It Level (Rev 1) with Brandt Built Cant Indicator - $175

MDT Send-It Level (Rev 1), New

MDT LRA MV3 90 Pic Mount

MDT LRA MV3 90 M-LOK Mount

I haven't had this problem before.

Lake City 223 cases were prepped as usual, sized with a Hornady sizing die, and an expander ball. They may not have been annealed.

Nosler Custom Competition 77-grain bullets are not seating using a Hornady seating die. Comes up hard once past the boat tail and then crushes the case.

I don't trust my micrometer at the third digit after the decimal, but the bullets are measuring .2235, and the expander ball is .220.

3.5 thou plus a bit of spring back may be my problem, but I have used these dies many times before without any issues.

Does anyone have a .223 Hornady expander ball they could measure for me?

If the dies are not the problem, I will try annealing. I use a Sinclair mandrel for other calibers, but not .223. Maybe it's time to add one to the set.

Any other thoughts?

No Longer for Sale Here. Moved To Auction Site.

Thought this might be a fun topic I don’t often see discussed here, but how about a thread dedicated to sub-caliber (anything below .22) rifles?

I recently got bit by the .17 bug, and would honestly love a .20 as well though that may be awhile yet. I have a .17 Fireball and will be picking up a .17 Ackley Bee next week, but anything sub-cal would belong here no matter how obscure. Calhoon stuff, Ackley stuff, .10s, .12s, .14s, .17s, 19s, .20s bring it all!

To start, since I’m pretty new to this stuff, I’m powder shopping for my two. I realize the .17AB and .17FB are both relatively close-ish in performance, but the prices were right so I pounced. I was initially hoping for a .17 Hornet and a Fireball, but holy hell the going prices for anything Hornet are crazy these days! About the only rifles in mass production for it would be the Savage 25, which gets mixed reviews and sells for way too much for what it is IMO. Ruger and CZ are both put of the Hornet game, and both of them sell for STOOPID money most of the time. I still want one, but it may be awhile…

So anyway, the Ackley Bee will have to do in it’s stead. If anyone else is shooting these, I’m open to powder suggestions. Benchmark and 8208 both come recommended, but are both hard to find and expensive when you can find them. I’d prefer something relatively temp sensitive and less expensive, but that combo may be a unicorn right now. TAC, CFE-BLK, H335, and VV N120/130 are less expensive options that seem to get good reviews as well, so I may order a pound of each in a bit and start load development to see what I can get.

So, what’s everyone else shooting, if anything?

I see a pile of data on here with the 90+gr bullets for 6GT loads… but Does anyone shoot the lighter bullets in their 6gt for varmints/coyotes? Please share some info of you’re willing

My gun will be 20” and 1:8

Can the suppressor I use on my Glock, with a piston due to the tilt barrel, be used without problems on my 9mm AR carbine.

*SOLD* Remington 700 AAC-SD action, trued. 16” Outlier barrel 1.20” chambered 6CM with Outlier muzzle brake. 20 rounds fired. AB Arms chassis with UTG M Lok bipod. Sighted it in and shot a few Woodchucks. Great little shorty truck gun. $1100 shipped to your FFL from an individual. PP FF… *SOLD*

I’m selling a gently used Insite Arms Heathen Original (3 ports) Muzzle Brake, 6.5mm, 5/8x24 thread pattern.
I purchased this brand new a few years ago and shot less than 950 rounds of 6.5 Creedmoor through it without issue.
It is in good to very good condition as pictured.
I am only selling it because I have moved onto using a suppressor.

SOLD
Paypal F&F or Venmo for payment.
First to PM me and post will own it.
Thank you!

So I posted on here last week asking about differences between a 6 and 25 creed, and decided to go 6. But the more I thought about it, the amount of 6mm cartridges out there is quite large. I want something for plinking and whitetail inside 350 yards. I would like the easy button for it when it comes to reloading, and decent speed. I have a 6br and 30br, both are very heavy but probably the easiest thing I've ever reloaded for. I was thinking maybe a 6x47 lapua, 6xc? or stick with he 6 creed, any other suggestions? I have a ton of cci450s that id like to use up on this as well.

thanks fellas

2 APA Little Bastard Gen 3 Brakes. Stainless one is .224 cal and the black one is 6mm. Both are 5/4x28 threaded. Used but work great still. $100 each shipped. I only have 12 of the adjustment screws I could find for them. I never use any of them anyways.