16" Criterion 223 wylde 1-8 with less than 300 rounds: $275 barrel only. With superlative gas block and tube: $350
15" Geissele mk 16 :$300

Would consider trade for a decent 11.5 barrel or mk16 in 10.5''
also interested in craddock 6 arc barrels.

Sinclair ultimate Trimmer with base, case holders and a new blade. $250

223 WFT trimmer $75

6.5 creed Knockoff WTF trimmer$50

Have a Girard on the way, time to clean this stuff out.

Used, Terrapin X have all the paperwork and box. Will come with rilfes only molle case. Purchased 10/2023 if that matters.
$1500 shipped.

Mystery Ranch 3 day assault - Coyote
$475
Kuiu Venture 2300-Verde
$ 180

196x Alpha SRP dasher brass 10x firings: $100
Keeping the lapua
81x New 48x once fired Lapua 6.5creed $120
315x LC 308 win 2x fired $150
Have lots of LC 5.56 brass can sell in 250-$80 or 500-$150.
Have a Ton of Fed GMM 308 Brass, will list once i get it cleaned up.

Everything has been annealed on AMP annealer every time.

2x fired and will need to be processed. I have ran these through an amp annealer.
$175 $150 $125 shipped.
Also have 50rd and 100 round ammo boxes available at additional $

Would possibly trade for:
Bullets:
105 berger
75 eldm
134 eldm
131 smk
107 smk
alpha brass:
6 dasher brass
25x47

New in the box Vortex Impact 4000. Has not been opened. $1,200 TYD

40-50% off most products
$300 and ill ship you the cert.

Federal XM80C 7.62x51mm NATO Ammo 149 Grain Full Metal Jacket XM80C - 5 x 500 Count - $1300 Shipped


Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

578 2x fired (de-primmed and annealed) and 109 1x fired (fully processed ready to load) 687 Total peices.
Already packed up in a USPS flat rate-$200 shipped.

Federal Gold Medal with Berger 185 Grain Juggernaut - 28 x 20 Count Boxes - Same Lot - $630 Shipped


Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

Hello gentlemen, I'm planning to buy one of this set, very good specs and cost effettive, but on the tecnical infos I ready that the set have incompatibilità with some/all Redding press.

Someone use this set or single shell holder of this brand with Redding press?

Particullarry with The Boss press.



Thanks

NIB Knights Armament Co. #KM21318 FF RAS long hand guard. Zelle or postal money order accepted. Thanks.

Looking for a Foundation Gideon!

Looking to sell this bad boy. Comes with the box and scope caps, no rings or documents. Scopes in great condition and will upload more pics this evening when I get home. Asking 2500 shipped and insured. (I was sent the wrong color cap, a black one should be here this evening).

Ok, first post in this section of the forum. I've been reloading 9mm for years with a dillon 650 no questions there got that down. But getting deeper into 2-gun pcsl type matches and Im looking to work up the lightest recoiling load possible for my match rifle. What do you all recommend using that will meter well in a dillion and be temp stable. I live in AZ so extreme temp swings are normal depending on the time of year. This load will not need to be accurate past 100yds. If I shoot a match at distance Ill just use some factory ammo until I start down the rabbit hole of accuracy.

I currently have dillon carbide dies in 223, still need to get the case trimmer to help process everything quickly. Ive snagged some powders, currently have varget, tac, n133 and stable match. Im thinking the stable match and varget will be saved for accurate loads later down the road but worry Tac might be to temp sensitive for a year round blaster load.

Feel free to talk shit of flame me I got think skin and its the interweb so I dont take offense to any of it.

Thanks for the help y'all I know this isnt really the style of shooting most people do here but this forum just seems to always produce excellent advice and info so Im sure one of you putos can point me in the right direction.

Right hand Manners PRS-1T (w/ thumbshelf) for short action R700/Impact 737R in Elite Black Forest camo w/ Manners Mini-Chassis. Also included is an Area 419 14" Arcalock arca rail with removable barricade stop and SAP 2-round holder. There are 2 removable LOP spacers installed for a total LOP of 15", as well as 2 QD flush cups on the left side. The barrel channel is 1.375" wide at it's narrowest point, so it can accommodate pretty much any barrel contour. Weighs 4lbs as you see it.

$1k shipped. The stock is in overall great shape. Will require modification if using an action with a swept bolt handle. Works fine with a straight handle, like Impact, Zermatt TL3, Terminus, Curtis, Surgeon, etc. Please PM for more pics or further details as well as if you'd like to talk/text/FaceTime. No Trades please.



Thanks!

This was a very limited run collaboration between topps and compliance edge.

3.13” blade length
6.63” overall length
CPM 3V steel

Kydex sheath

$250 shipped

We have released two new products at Straight Jacket in April of 2025. Both built off the Tikka T3X action we now offer the Tikka competition package and the Tikka hunter package. Some of our rifles seem a little harder to get into with pricing keeping people wanting the accuracy we provide in our builds. We feel the Tikka T3X action is a great option to help reduce costs but still be reliable and meet our standards. We offer in house financing with zero interest, with 50% needed to start the build, and paid in full before shipping. Call LaWayne at 435-462-1607 for any questions or help you may need. Click these links to see the product, Tikka Competition, Tikka Hunter.

Manners MCS-TF4-700SA-DBM - Brand New -$975 Shipped. I just unwrapped to take pictures for this listing.

Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.

These were made by Colton Arias of Bridger Forge in Nebraska. He is a two time winner of Forged in Fire and one heck of a blade smith.

Tanto with sheath - $475

Skinner/Hunter with sheath - $450

Unfired Geissele cut rifle blank chambered in 6 Creed for Impact short action by KI Precision. 7.5 twst, 26" length, Comp contour, 5/8-24 muzzle threads.
$550 tyd

JP LMOS Bolt Carrier with HP Bolt - Been shot about 15 times

Price: $325

Tango Innovations Fire 4000 weapon mounted rangefinders. Have several in stock and ready to ship. Tax and Shipping are on me! $1,500 to your door.

I have a new Factory SIG MCX SPEAR LT 14.5. The barrel was pinned and welded with a surefire 3 prong by retro arms (best in the game). The barrel is also the MIL/LE Barrel that is chrome lined and CHF 14.5 from the factory. $1700 shipped to your FFL