Looking to sell my ZCO 840 MPCT1X 10 Mil NLE. Has the normal wear and tear on it as it has been shot at PRS matches. Still works perfect. I had a concern about zero shift once and sent it in to ZCO and it came back with a clean bill of health and was used when I got 9th place at Twisted Barrel Scorcher. This thing has sat in an Area 419 mount with proper torque its whole life.

** Well I have enough people reaching out asking me why in the world would I sell a ZCO, figured I would answer it here. Honestly there isn't a good reason. I also have a K540i and shooting them side by side they are just so comparable. I believe the reticle is better in the ZCO but slightly better FOV, parallax adjustment and ever so slight image quality has me wanting to keep the K540 and sell the ZCO.

Asking $3800 as that seems appropriate with the current availability. No trades.

**SOLD**

Lightly used waypoint, has 6 boxes of Hornady 175gr precision hunter down barrel. Shoots consistent .5-.75” groups.
Awesome rifle just upgraded to a custom build $1600 shipped obo scope not included

FD-4 Accutac Bipod for $275 Shipped. Arca mount QDView attachment IMG_4015.jpegView attachment IMG_4017.jpeg

(No longer available)

Selling my lightly used Leopold Mark 5

Comes with a SPUHR sp5006 Mount ,diving board , send it level adapter (not in photos)
(Flatline ops Halo bubble level not included)

DI precision windage turret knob

(No longer available)
2000 shipped to your door (insurance on buyer )
PayPal f&f ,Venmo

Used Sig Sauer P220 45ACP with 3 8rd mags. $500 + shipping to your FFL

I'm going to install a Lilja 1.00" barrel in a CZ 457 Standard Varmint stock. My question is, do I start at the bottom of the channel with smaller socket/ sandpaper? Or, start at top of channel with final width of socket and sand paper needed. I just want to avoid the top finished edges from getting chipped or scuffed. I suppose I could tape off that top edges? I'm open to all suggestions / ideas! Thanks!

Nitrided Defiance anti-x, .308bf, rem 700 SA, 20moa built in rail. Has around 800-1000 rounds on it. I didn’t like the original bolt know so if comes with the original and a round one installed. Feel free to pm me with any questions or to request more pics.

$1,350 obo, shipped to you FFL. Make sure they accept from individuals.

PayPal F&F preferred

Leupold Mark 5
5-25x56 PR2 Mil
-it’s in a leupold mark 6 ims 1.5” high, 0 moa mount
-has a flatline ops halo-x level installed
-I would say scope is in good condition
-glass is perfect
- there is a little wear spot where I had an mkm throw lever mounted. See pics.
I can separate the mount and or level if you like. Just pm me. I can also send additional pics
-comes in the original box with sunshade and leupold caps
$1,950 obo, to your door

PayPal F&F preferred

5 x 10 round
Like new & red followers.

SOLD shipped.

PP F&F or Zelle

Low round count
3/4-24 threads
One 6.5 Cal Left

$90
PM me on here with questions.

G'day blokes;

Need info on the current in spec 338 Norma Mag - Not so much the AP rounds, more the SOCOM load and the Machine Gun ammo. Anyone know what the bullets are?

Cheers

Delete

Looking to sell a brand new in unopened box Nightforce NX8 in flat dark earth color.

Please let me know if you have any questions

Selling for $1750 shipped

PayPal friends/family

Text for fastest response at 636-297-5055

Thanks!
Ben

Set of Leica 10x42 3200.com. Binos work great. Just came back from Leica with a fresh service. These binos have plenty of handling marks and minor scratches on the glass. Comes with original box.
$1,200 shipped

Looking for a CZ 457 Timney Trigger. Payment ready.

This was on a small frame gasser with minimal use. Mainly used for non-shooting demo. There are small marks on the turret but tracks great with glass in great shape. Will ship in original box with sunshade.
Asking $1100 shipped, Venmo F&F only

I have an Area 419 36mm 1.54" height, 0 MOA mount, I'd like to trade for a 36mm, 1.27", 0 MOA variety.

Let me know what you got.

Hello,

Wife has me trying to sell my guns and I can’t find any info or comps on my POF P-416 Semi auto.

Are they just going for the same as a POF P-415 because that’s basically what it is?

Any info is appreciated!

Hi all,

Getting back into the LR wagon and I've been eyeing the Bergara B14 HMR 6.5 Creedmoor among others that would be of similar quality and cost. What do they typically go for used?
Thanks for the help.

luckygunner still has it and @ .46 per tela FMJ all the way up to 2.50 per US made . Tela is magnetic and non corrosive

Thought some of you might be interested in my Israeli Defense Forces Mauser M-66 SP sniper rifle in 7.62 x 51 (.308 Winchester). Almost all of these rifles were produced in 1980 on the commercial Mauser M66 short action. There were only 360 of these rifles produced. This particular one was used by the IDF and then sold to Springfield Armory who retailed a small number. I purchased this gun from the collection of actor James Earl Jones. This particular gun has the Nimrod 6x40 scope. It is also shown with a Zeiss Orion 80/I (Fero Z51) Night Vision Rifle Scope.

As a design the M-66 SP, like many sniper rifles traces its roots to a civilian sporting rifle. The action was designed in the 1950’s by Walter Gehman, world record setting German “Master Shooter”, expert ballistician, and small arms engineer. Mauser put Gehman’s creation, known in Germany as the “Gehman-Short Action” into production in 1965. In 1971, German police, like many other law enforcement organizations at the time, began to search for weapons, create tactics, and form units to fight terrorism. The bloody attack by Arab terrorists at the 1972 Munich Olympics caused Mauser to design a precision sniping version of the M-66. After eight years of development the weapon was ready to be put into production and was designated as the “SP” variant of the M-66. All M-66 SP rifles had to group five shots in a two-centimeter diameter group at 100 meters. Only 360 of these rifles were produced with almost all of them being manufactured in 1980. Mauser suspended production of all M-66 rifles in 1995.

I’m looking to rebarrel my old Tikka T3 243 into something to use as my ranch rifle/truck gun to keep in my rig daily. I’d like it to be as short as reasonably possible, and I’d like to use factory ammo just for the cost and convenience in a gun that will be abused and fired a lot. I’ve got a peak44 stock on the way and a Leupold VX3 that’s been waiting to be put on something. The cartridges I’m looking at as of now are 6CM, 25CM, 6.5CM and of course good old 308. Open to other chambering suggestions as well. Duties will include dispatching coyotes, feral hogs, and whitetail if the opportunity presents itself during season. Likely maximum range on live targets will be 400 yards just given the brush and topography of my place. I currently use a 22CM at 22” but I’d like it to be a few inches shorter for getting it out the truck window easily and quickly. I’d build another 22CM shorter but that’s boring. Rifle will be suppressed full time.

Yes I realize I’m giving up performance with factory ammo and a short barrel but this tool isn’t going to be about maximizing performance, it’s about easy handling and being capable enough to be useful. I know there’s plenty of posts about short barrels but I’m looking for experience specifically with factory ammunition. So who’s running factory ammo in a 16-20” rifle, what cartridge and muzzle velocities are you getting? Have you seen good kills on small to medium size game with your setup?

Good Essay on the message in this 1993 movie and how it relates to current times.

Login to view embedded media

Nearly 2.5 MILLION people have signed a petition supporting the ftard illegal alien responsible for the deaths of 3 people when he tried an illegal u-turn on a highway.

I watched the in-cab camera of this guy as he was trying this idiot u-turn. His expression does not change one bit as he realizes that something has just hit his trailer.

Unbelievable

300 Win Mag Redding Type S Bushing Style Full Sizing Die, #77153, new, plus upgraded Hornady lock ring. $45 tyd. PayPal or Zelle preferred.