bought both the B5 & Magpul PRS for this build to see what felt best for me on this .22lr build

Selling the B5 systems, like new-used for 1 match.

SOLD to @JW117

Got from another member, 24” medium profile 6XC 500 rounds on it. Comes with Tubb dies and a 300ish pieces of Peterson brass.

Shoots well just moving out of the 6mm world.

$500 obo or trades?
trade for other non 6mm TL3 barrels or CDG barrels.
other PRS/ NRL hunter gear

Who has been arrested for starting this? Or the bomb that was placed?

Anyone?

Trump isn’t going to save you

Login to view embedded media

43 pieces 1x fired lapua SRP 6.5 Creedmoor brass.

$SOLD shipped

Basically a new take off LMT non-euro AXLE Trigger. Very low (less than 50) rounds on it.

Asking $115 shipped

PP F&F preferred, PM with any questions.

CM

Hey boys,

I have a NIB Griffin MGL-110 for sale on a Form 3 in Texas. I bought two of them, and only need one. This one was mounted on my KAC M110 to check barrel concentricity and put back in the box. It’s never had a round fired through it, and is NIB.
Asking 1700 obo for the suppressor, plus shipping and transfer fees. This will save you at least 400 dollars compared to buying directly from a dealer.

Form 3 transfer to individual in Texas doesn’t require a dealer, but if shipping out of state, it’ll need to go to a dealer first, then transfer to you.

May consider trades at 2k value. (Really looking for a TBAC 30 cal Magnus)

Thanks!

Hello all,

I have a somewhat stupid question on bullet seating when seating into a compressed load. I’m noticing one bullets OG will be dead on, the next will be 8k longer, the next 4K longer and so on. I need to adjust the die to each specific round I seat. Is this due to the load being compressed slightly differently in each cartridge? Or am I missing something? All the brass is within .5k of spec, so I know it’s not that.

I used to stay away from compressed loads, but sometimes it’s unavoidable. Everything I’m loading is well within SAAMI spec. specifically 223 with 23-24.5 of N140 under a 75g BTHP.

Any tips or tricks with dealing with compressed loads would be helpful!

Full description of stock in a picture.. is like new, decided to go ahead and part it out. Would like 900 shipped

Both are cut for M5 not bdl... Hinged floor plate, unsure of brand. Was used in a 6.5prc, got it with a barreled action.. 140 shipped
Dbm with 1 magazine(magnum) 225 shipped

*New* These were opened to take pictures and function check this evening. Price is 3000 2800 shipped and insured firm.

SPF!

Used EC tuner brake V1 in great condition. Black nitride, 5/8-24

SOLD

$599 $499 Magnetospeed V3, MK Machining Mount, & Milwaukee Packout Custom Case shipped Fedex to the lower 48
Package only, will not separate.

• MagnetoSpeed V3 Ballistic Chronograph $375 ($450 new)
  • ~3yrs old but only used 2x. 1x when I got it and 1x time in '23. Had a kid and took a brief hiatus from shooting.
  • Works perfectly, will come with everything it came with as new except the hard case.
  • Will include the hard case for an additional $20. Roughly my shipping cost to ship it separate.
• MK Machining Gen ? Magnetospeed Mount (With 12″ Rod) $125 ($160 new)
  • I bought this new, shortly after buying the Magnetospeed.
  • I’m not sure which Gen this one is, I don’t know what the difference is in Gen I, Gen II, & Gen III, maybe somebody can help me out with that. The only difference I can tell between the Gen III and mine is that mine doesn’t have the threaded rod.
• Milwaukee Packout Organizer 48-22-8430 $49
  • Modified to take the Kaizen Foam. Not cosmetically perfect, but the foam covers up my imperfect cutting of the plastic.
  • Applied Rust-Oleum 253256 Specialty Lens Tint Spray Paint to the inside of the lid to protect the foam on hot range days. I haven't had a hot day to field test this, so be careful leaving it out in the sun.
  • Clear Cover Tinted ($20 material cost)
• Kaizen Foam Insert $50
  • Option #3

Cashiers Check, Check with time to clear, BTC, or Apple Cash (will figure out hopefully)
Price is firm. This is a great value to someone who doesn't want to modify the case and foam themselves.


Trades considered, but must be LNIB w/box & accessories unless otherwise specified:
12 Man Tipi Kifaru, Seek Outside, or similar quality will consider lightly used

ICUGR Integrated Compact Ultralight Gun-Mounted Rangefinder
Nightforce NX8 2.5-20x50mm F1 Zerostop Mil-XT Dark Earth Riflescope C665
Vortex Razor Gen III 1-10x24 EBR-9 MRAD Riflescope RZR-11002

Dillon XL750 or better progressive press 1100, Mark 7 etc.
Dillon Casefeeder
Mr. Bulletfeeder by Double Alpha
Dillon RF100 Auto Primer Filler

Impact Action 737T - Right Handed, Full Rail Titan, AW Cut will consider used but in great shape
Terminus Action Zeus Short Action Mag Bolt will consider used but in great shape
The War Poet by Shadow Systems, Semi-auto, 9mm
Springfield Armory XDM OSP 10mm Optics-Ready Threaded Barrel

Kestel 5700 Applied Ballistics
Sig Sauer KILO5K
Vortex Fury HD 5000 AB 10x42 Laser Rangefinding Binocular LRF302

Leki BLACK SERIES FX CARBON
Black Diamond ALPINE CARBON Z TREKKING POLES

Dillon 550B Package Deal (see below) $1000. <70% of new price. Prefer FTF, but will ship at buyer's expense. Madison, AL.
Cashier's check, Cash (FTF), check(shipped), or Bitcoin. I canceled my account with paypal after that implemented a policy allowing them to fine you for your social credit score.

Just because it's pictured, doesn't mean it's included. Please consult the list below. I intend to sell the press with everything it would come with new comparing it to the 550c manual. If there's an misc part you expect it to come with please specify.

This has been an amazing press that has put out 1000s of rds. I'm only selling it to fund an upgrade to an XL750 with casefeeder and bullet feeder.


I'll include the 40 S&W, 10mm die set for another $125.
Redding Competition Seater Die 40 S&W, 10mm Auto 55253
Redding Taper Crimp Die 40 S&W, 10mm Auto 85253
Dillon Carbide Sizing/Depriming Die 40 S&W/10mm 14407


Trades considered, but must be LNIB w/box & accessories unless otherwise specified:
12 Man Tipi Kifaru, Seek Outside, or similar quality will consider lightly used

ICUGR Integrated Compact Ultralight Gun-Mounted Rangefinder
Nightforce NX8 2.5-20x50mm F1 Zerostop Mil-XT Dark Earth Riflescope C665
Nightforce NX8 4-32x50mm F1 ZeroStop .1 MRAD DigIllum PTL Mil-XT Dark Earth Riflescope C667
Vortex Razor Gen III 1-10x24 EBR-9 MRAD Riflescope RZR-11002

Dillon XL750 or better progressive press 1100, Mark 7 etc.
Dillon Caliber Conversion Kits | XL750 / XL650: 5.56/ 6.5 Grendel/ 45 ACP/ 9mm
Dillon Casefeeder
Mr. Bulletfeeder by Double Alpha
Dillon RF100 Auto Primer Filler
Dillon Toolhead | XL750 / XL650 Black or Blue

Impact Action 737T - Right Handed, Full Rail Titan, AW Cut will consider used but in great shape
Terminus Action Zeus Short Action Mag Bolt will consider used but in great shape
The War Poet by Shadow Systems, Semi-auto, 9mm
Springfield Armory XDM OSP 10mm Optics-Ready Flat Dark Earth Threaded Barrel

Western Mountaineering Everlite or Badger MF
First Lite Shale Touch Hybrid Glove LG
First Lite Alpine Cold Weather Glove LG

High Country Pack Ultralight Game Bag Set
Kestel 5700 Applied Ballistics
Sig Sauer KILO5K
Vortex Fury HD 5000 AB 10x42 Laser Rangefinding Binocular LRF302

Leki BLACK SERIES FX CARBON
Black Diamond ALPINE CARBON Z TREKKING POLES

Middle of the night; dude clearing his house and smokes a black bear (sound only works in full screen for some reason):



Thoughts off the top of my head:

Interested in knowing what ammunition he used. Not a big bear, but they’re tough, and usually don’t go down easy.

Nice work on the shooting; looked like good CNS shots right off the bat. Good job. However, less than stellar job clearing the house. If that had been an actual armed intruder, he’d have gotten smoked.

Bonus points for having a sling, but he should have had his support arm through it… much harder to have your weapon taken away from you and used against you. No stone to throw though, he did better than I probably would have done in the middle of the night.

240 ct
6 mm 107 sierra
Will ship in flat rate box not original
PayPal friends

Hi,
I'm relatively new to reloading although, I've had some great success in my process, and I'm really enjoying it.
However, I just came across an "old" batch of resized .308 cases that I had planned on using for my 150gr Barnes MPG's. (multi purpose greens)... initially, I thought I'd use my comparator and set my relative headspace to 1.620... so, I went ahead and cranked out 50 cases at 1.620.... then, I put them away, and kind of set them aside for a while... I jumped over to reload for my Mini-14, Ruger American, DMR and my SPR.
Now, I'm back to my plan to reload for those MPG's.... I re-sized another batch of 100 cases, but, decided to set the bump to - .003 which lands me at 1.624/ 1.626.
I decided not to stick with the 1.620 because I had learned that a .006 shoulder bump may overwork the brass.
So, now my inventory will have some with 1.620 relative headspace and others around 1.624/ 1.626....
Should I be concerned?
I'm going to the range next week and I'm going to compare accuracy and chrono for (5) loads from each set (1.620 vs 1.626).... (150gr Barnes MPG with 45gr of VV N540).
These are for my 16" AR10 "blaster" build..... meant for extreme scenarios under 300 yards, so, I'm not too concerned about 1/2 MOA accuracy....

The reason I chose 1.620 for the MPG's is that many of my other 150gr factory .308 rounds are set at 1.620.... but, most other of my factory .308 rounds are between 1.624 to 1.626.
So, I'm going to just focus on setting my bump to -.002/.003 which lands me between 1.624/1.626 for general reloading purposes.....
although these rounds will be for my 16" AR-10, I want them to fit universally in any of my .308's....

But, as far as having a mixed batch with relative headspace ranging from 1.620 to 1.626, do you see any issues?
(I've got my (3) AR-10's pictured: 16" Wilson Combat Recon; 18" Bartlein, and 24" Shaw Bull........and, a picture of my "reloading station" on top of my wife's dresser).... the bartlein has a slightly smaller chamber and is more sensitive to hotter loads.....

Camera Land's Extended Labor Day Sale Now through Tuesday September 2nd.

Normally this sale would start the Friday of Labor Day Weekend, however, Doug will be away starting August 20th so we're starting it early and running it through September 2nd Everyone should attend a BBQ and eat some cake, have a great end of Summer blowout weekend. Doug's birthday is September 1st and is pleased that since that's Labor Day it's like the whole country will be at a Doug Birthday BBQ. We have some incredible opportunities on the optics you've been wanting. We have been stocking up, readying for this great sale.

We offer ZERO % financing on all web orders. Please look at Affirm at check out, if this is something that interests you, for 0% financing.

This sale includes, but is not limited to Arken Scopes and Accessories, Athlon, Hawke, GPO, Kowa, Sightron Riflescopes, Konus, Element, Slik Tripods & Peak Design Some models of Sig Sauer are on sale through August 31st, some Leica's are also reduced. We've got a great selection of same as new Open Box optics that come with the full warranty, as well as many Specials that certainly are worth your time to check out. If it's not marked down please give us a call, 516-217-1000, so we can take care of you personally.

The new DNT Zulus HD V2 Nightvision Optics are now in stock, as well as their ThermNight Thermals.

We are running the very popular GPO BX730 8x40 Rangeguide Binocular Reduced from $1,299.99 to only $649.99

We've stocked up on a few specials from Zeiss

GPO Centuri Riflescope Special - we are including a free sunshade and GPO is including a Free Custom Kenton Turret with every Scope purchase.

We handle the full line of AGM Thermal and Digital Night Vision Optics and are here to answer any questions you may have. You also need to check out their new line of AGM Binoculars - The AGM ObservIR LRF Thermal & Digital Day/Night Vision binocular is some of the most technologically advanced and feature-packed optics in the world.

After many months of no and low inventory we have stock, ready to ship, of the Athlon Rangecraft Velocity PRO Radar Chronograph

DNT Hydra Multi-Function Thermal Scope - Standalone Scope - Clip-On - Handheld Monocular Sale
Great news. These 3 great DNT Hydra Multi-Function Thermal Scope - Standalone Scope - Clip-On - Handheld Monoculars are on sale.
DNT HS225 - Hydra 256x192 25mm Multi-Function Thermal Scope - Standalone Scope - Clip-On - Handheld Monocular reduced to only $799.99
DNT HS325 - Hydra 384x288 25mm Multi-Function Thermal Scope - Standalone Scope - Clip-On - Handheld Monocular reduced to only $1,199.99
DNT HS635 - Hydra 640x512 35mm Multi-Function Thermal Scope - Standalone Scope - Clip-On - Handheld Monocular reduced to only $1,999.99

We are now an authorized Leofoto Tripod Dealer - Leofoto is a premier maker of Tripods, Monopods and Heads.

Always take care of your optics correctly. Check out the VSGO Optical Cleaning Kit

Save big $$$ - Open Box, Demo, Clearance, Bundles & Specials

Take a peek at our Just Arrived & Flash Sale sections for exceptional deals

Use promo code promo24 at checkout and save 10% on Benro, Gitzo, LowePro, MagMod, Manfrotto, Nisi, Promaster, Sirui & Slik

Look good with accessories from our Apparel Section

At Camera Land we've been working hard to save you money and get you great products.

Remember to Enter Our Monthly Web Drawing

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Calling all heavy equipment experts.

I just bought a Bobcat s590. I want to get OTT tracks for it and a good quality root grapple. I don't mind buying used if it is in good condition.

Where should I be looking for these items?

Also might try to pick up a standard flow snowblower.

Thanks in advance guys.

Obligatory pic.

So I put together a non clone correct SPR type upper and have been struggling to get the groups I had hoped for. Trying to get some feedback from some more seasoned shooters regarding gas gun accuracy shooting. I mainly have shot bolt action when trying for precision and so I’m not sure what to expect realistically. I’m trying to do some basic load development using 77 gr OTM from Mid South Shooters. I’m loading new Starline brass with Varget and CCI 400 primers. Rifle is 18 inch PRI Douglas stainless MK 12 barrel 1:8 twist Geissele Mark 18 Arca handguard on BCM upper receiver matched to my BCM lower with Geissele 2 stage trigger. Using B5 Sopmod stock with a bag rider. Shooting prone with bipod on front and rear bag. Optic is Meopta Optika 6 3-18X 50 in ADM Recon mount. taking my time and shooting groups at 100 yards, checking all the boxes of solid position, breathing, trigger control, follow through,ect…most groups have been larger than moa. I have one sub moa 10 shot group so far in 200 rounds of attempting my best. I can shoot in the 3’s with my Tikka CTR 308, but don’t know what the deal is so far with this gun ammo optic and shooter combination. Any thoughts? Maybe I should try some 75 gr Hornady or some 69 SMK, but not really blown away so far with this barrel. I’m not saying it’s not just me shooting poorly. I hear a lot of people online claiming 1/2 moa groups with precision gas guns so I’m thinking I have a dud, but then I watch 9 hole reviews comparing a PRI douglas to a BCM 18 inch 1:8 and their best 9 shot group was 1.3 inches with factory Match ammo…I’m fairly new to precision shooting, reloading and especially precision gas guns, so what’s some thoughts dudes of the more seasoned variety? What should I focus on?

Hey all,
I’m pretty new to building rifles, so I might not have the right vocabulary to fully describe or diagnose everything here, but I’m hoping to get some input.
I just finished putting together a 6 ARC build and took it out for some initial testing. I’m running a RIFLESPEED gas block (set to 6) and shooting suppressed with an OCL Polonium.
I ran into a couple of issues right off the bat. First was a double feed—I'm pretty sure that one's on the mag.
The bigger issue came around the sixth round. When the range went cold, as I cleared the round in the chamber, the case separated and dumped powder all over the inside of the action, but the bullet stayed stuck in the barrel. Worth noting: I had just cleaned the barrel a few rounds before this happened.
I have some video and photos showing the chamber and the round, where you can see rifling marks indicating where the round is contacting the rifling. I’ll attach those for reference.
I’m trying to figure out if this is a gas issue or something else. Does the RIFLESPEED block only restrict gas, or does it also vent some off? I’m wondering if too much gas or pressure is being pushed back into the chamber and causing issues like this. I’m also looking into whether the throat on the barrel is too short—planning to contact the barrel manufacturer about that.
Ejection looked pretty normal—good pattern, not excessive—but when I tore it down afterward, I saw some noticeable wear on two bolt lugs (one above and one below the extractor). That wear has me thinking the timing might be off.
I've attached a couple pics of the bolt lugs as well.
Any ideas or similar experiences? Would appreciate any input.

FOR SALE is a brand new Guide TB 1250 Clip-on Thermal unit. World's first HD clip-on. Only used a couple times in the field. Great unit with 1280/1024 12um resolution. This will not come w/ a mount of any kind you'll have to buy a Rusan mount or I believe they have third party 3d printed mounts to mount to a picatinny rail. It's a great unit with a crystal clear image and the range finder is also nails! See pictures below, unit is in perfect condition. $4,450 shipped to continental US.





View attachment 8733063

Steiner T6Xi 5-30x56 has the MSR2 mil reticle. Lightly used but has some ring marks. Trijicon vcog SCO 1-8 MRAD reticle. Theres a couple marks on the turrets but otherwise in good condition. Both come with the box and all accessories. Not looking for any trades.

$1300 for the steiner - sold
$1800 for the VCOG

Older M49 spotter. Case is rough. Scope works. I disassembled and cleaned the prisms and shimmed to hold tightly in place. Prisms are very nice, no chips or scratches. Cleaned the objective best I could. The scope is clear and focuses sharp. This is a vintage piece of gear and at 20x they are not for looking at bullet holes. This is an observation telescope. This has an early property tag. $175 OBO