SCHMIDT AND BENDER LITHIUM GREASE spatter PROBLEM ***SO YOU KNOW WHAT TO DO IF YOU GOT IT!

08-05-2017, 09:09 PM
I bought a new Schmidt and Bender 5x25x56 in march I had it on mt 300 Norma Mag .I had what look to be water spots on the inside of the glass .I contacted Schmidt and Bender in Virginia .The service tech sent me a UPS label I sent it back.the first part of June.The scope was clear again no problems.I mounted the scope on my 6.5 creedmoor I started breaking the barrel in on my rifle.I had 100 rounds through the rifle.I was back to the range Friday morning I looked through the scope a big circle in the bottom right of the scope and a small one on the left side .I contacted Schmidt and Bender again in Virginia .The tech said Germany had changed the type of lube they are using in the scope.They started having problems with spatter on the glass.So now my scope is on its way back again.The tech said my scope was the second one he had seen with lithium grease spatter on the inside of the glass.So if you get a new scope and it has spatter on the glass call Schmidt and bender.

Used in great shape. Glass is clear. Non illuminated No box only what’s shown. Vortex flip caps included

$800 shipped

Apple Pay PPFF Venmo zelle

Looking for $180 shipped to lower 48 (SOLD)

Curtis Axiom with 26” Bartlien 7 twist. Cut by Extreme Shooting Sports. Only 200 on the barrel. Berger 108 @ 2950. Shoots .250 or better. Ace brake, Trigger Tech special flat shoe. KRG Bravo with full rail.
Vortex Razor gen II 4.5x27 mil. Vortex rings.
200 alpha brass once fired annealed and cleaned. Ready for sizing.
$3700complete setup no bipod shipped.
$2300 no optic shipped.
Ckypod single pull available for extra $500.

$165 Shipped. Zelle or PayPal F&F.

I have 329 (+/- a few due to counting errors) pieces of once fired 6.5 CM Hornady brass. 200 pieces came from Hornady American Gunner ammunition with the balance coming from factory 140 gr. ELD-M. All were fired from the same bolt gun (RPR). The brass is mixed together. Casings are de-primed.

$100 shipped.



Let me know if there are any questions.

Looking for some feed back on this spotting scope. I like all the spec. But a little nervous about spending $1800 on one without hearing some real world experience and not able to see one in the flesh.

Up for sale are two one RRS SOAR BTC-Pro bipod clamps.

These clamps are in good condition with minimal use.

I'm asking $65 shipped for each clamp.

Please let me know if you have any questions.

Edit: Both sold.

Brand new Christensen Arms Carbon Fiber green with black webbing composite stock. Fits Remington 700 Short actions with Sendero proof barrels. Comes with brand new Wyatts DBM Bottom Metal, brand new Wyatts 5 round mag and brand new Wyatts 10 round mag. Bought all of this and decided to go a different route. $600 buys it all shipped to your door.

Used a few times but on excellent condition. Want to upgrade to AB so selling.

$375 tyd conus

Up for sale, Luth-AR MBA-3 Carbine Buttstock, I bought it used from another forum member but didn't get to use it, hence its getting sold. For all details on this buttstcok see https://www.luth-ar.com/product/mba-3-carbine-buttstock/

Price: SOLD shipped to your door.

Acceptable Payment method: PPFF, Venmo, CashApp, all of them discreet (absolutely no comments), or add the 4% fee on top of the listing price.

Items ship next business day.

JP GMR 15 - 9mm
Side charger upper
Taylor Freelance magwell
Smoke composite carbon handgurad with Brekke vertical port comp with extension
Hiperfire eclipse triger
Smoke composite carbon A5 buffer tube
Hydraulic buffer with sprinco orange spring and .300 distance for short stroke.

$2500

Up for sale, brand new Seekins Precision Adjustable Precision Rifle Stock AR-15, LR-308 Polymer Black, mounts to rifle-length receiver extension tube.

Price: SOLD, shipped to your door.

Acceptable Payment method: PPFF, Venmo, CashApp, all of them discreet (absolutely no comments), or add the 4% fee on top of the listing price.

Items ship next business day.

Like new springfield prodigy 4.25.
Brought new few weeks ago at local gun shop. Shot great, its just not for me. Come with box, case, 17 rd mag,21 rd mag, red dot plate. $1100 shipped to your FFL. Trades possible for rife optic.

Impact, Manners EH1 Mini Chassis with a Bartlein Carbon 24" 1-8 twist 6.5 Gap 4s .120 Freebore. Shot this Prime Ammo great. 100rnds fired total. Will include the brass.

$3k delivered to your ffl

Decided to part with some of the Knights collection. May update listing with some addiitonal uppers/parts. Details below:

Unfired Knight’s Armament SR-25 Advanced Precision Carbine Upper Receiver (KAC PN:111474)

• Unfired (other than factory), Knight’s Armament SR-25 Advanced Precision Carbine Upper Receiver take off upper from a factory complete APC.
• URX 4 handguard and Knights 3-prong open tine flash suppressor. This upper produced a 0.877” inch grouping in its July 2020 test fire at Knight’s Titusville factory.
• The upper has been safe kept. It includes the test target and the complete Knights SR-25 operators manual. KAC irons not included (have been utilized on another project).

Please note this upper is a rifle take off, will ship heavily bubble wrapped in plain box, but not in a white KAC box.

Some e-payment options available, inquired with Seller. No Sales to banned states (NY, WA, DC, MA, etc..).

Venmo, Zelle, Check or USPS. No Sales to banned states (NY, WA, DC, MA, etc..).

Not really looking for trades but willing discuss Accuracy Int’l, TacOps, Nighthawk, other Knights or ZCO’s in MCPT2x or 3x.

Had to go to Home Depot the other day to replace a trash can that the wind blew off our mountain and never was seen again

While we were there, we found a Ryobi bundle that included a small drill & driver combo as well as a small circular saw & a light for something like $150. They also had an accompanying bit set for... around $50 or so. So for under $200 we walked away with a nifty toolset for my wife. Comparatively we spent as much replacing the trash and recycling bins that the wind apparently swept away. All in all, not a bad pickup.

Hi guys,
I've got an old paddle board Ruger M77 Markii in 30-06 and would like to modernise the chassis.
Just after any ideas from those who have done it or are in the know?
I've looked at Boyds, H&S precision and Bell amd Carlson. Does anybody have any experience with these stocks or any pictures to help envision what the finally product may look like?
Any assistance, ideas, recommendations are appreciated.

Chambered by Jelrod - $400 Shipped

SOLD

I believe all 3 boxes are the same lot number. I’ve got enough hornady here to burn up that I’ll never touch these.

I prefer to sell as one lot but can split if necessary

$400 shipped for all 1500
$150 shipped per 500 if splitting.

New HS Precision PSL155 stock it is Rem 700 and clone cut. It is Carbon and has Rem Varmint/Carbon barrel channel. Standard Remington style bottom metal cut. I do have a new Snowy Moutains bottom metal and magazine kit included with the sale. Magazine included is for magnum so prc, saum or wsm. Regular mags avaible on Snowy's website. Blue tape inside the stock is holding the action screws.

$675 delivered

I have recently seen 2 different trucks with chains mounted from, what appears to be, somewhere behind the front bumper, forming a lazy U, made out of thick thick chains, and hanging about 2-3" from the ground. The low ground clearance would seem to negate any offroad capabilities. Similar to the attached pic, however the chain links are as thick as the shackles in the pic and hang way low. Has anyone else seen this or have any info on what they may be for?
I sadistically thought they may keep people protesting in the road from piling up under the truck on the commute home.

Selling my Spuhr QDP-4616 34mm 1.5” height 20moa. Great shape, no range time.

SOLD

For Sale: GA Precision Tempest Barreled Action, Reloading Dies, and Brass

This is an exceptional package deal for someone looking to get into the PRS and compete, featuring a premium GA Precision Tempest action Bartlein Barrel, dies, and brass. Everything you need to build, shoot, and reload.

Barreled Action and Components:

• GA Precision Tempest Action: 3 lug x2 design, 60 deg bolt lift, Black DLC coating, Includes an extra bolt, extra magnum bolt, and spare spring.
• Trigger: Bix'n Andy Competition Trigger set at 16oz.

---

Barrels Included:

6.5x47 Barrel: Bartlein HV Palma, 1547 rounds shot.

---

Reloading Dies:

6.5x47

• Redding: S-Bushing Full-Length Sizer.
• Forster: Micrometer Seater.

---

Brass:

6.5x47

• Lapua Brass: Approximately 450 cases (showing signs of nearing case head separation, maybe one or two reloads left in them. Suitable only for experienced reloaders with caution).

---

Pricing and Contact Information

• Price: $1300.00 for everything in the picture
• Location: Centennial, CO
• Contact: DM or me [Lou]

No trades, please. Cash payment in person is preferred. Buyer must comply with all applicable laws and arrange for FFL transfer; local face-to-face transfer is preferred and can be arranged in the Denver and surrounding area. If purchasing from out of state, buyer pays for shipping to FFL.