Filter

Battleship Shooting Game

Most of you probably remember the Battleship Game played as a youngster. Well I watched a video of a couple of gentlemen playing the shooting game at 300 yards. So I thought that it can also be played with rimfire rifles, pistols or air guns at an appropriate distance. Here's the video:

Login to view embedded media
A couple of PDF files of the target that I produced are attached. You will notice that one version of the target has the numbers on top with letters on the side and vice-versa. I noticed that there are variations of the game in some online photos. So I have produced two versions of the target depending on the game you have.

When printed actual size on 8.5 X 11 paper, each square is 3/4". I would have liked to made them larger but couldn't due to the constraints of paper size and MS Publisher.

I suggest that you print it on card stock to get clean bullet holes in the paper. If you have a printer that can accommodate larger paper such as 11 X 17 you could select "fit to size" on the options and get larger squares to shoot at. Nevertheless, a .75" square should not be a problem for a precision rimfire rifle at 50 yards. For 8.5 X 11 paper or card stock remember to select "actual size" in the print dialogue.

The rules are modified for the shooting game and printed on the target. Put some money on the game for added stress.

I am open to any suggestions for improving this game. You will have to purchase the game board separately:)

Battleship Target.jpg
Battleship Target Rev 1.jpg

Attachments

  • Battleship Target.pdf
    78 KB · Views: 31
  • Battleship Target Rev 1.pdf
    78 KB · Views: 28

SOLD Left Hand Bighorn TL3

Black nitride lefty .308 bolt face SA. Two barrels, will consider selling all separate. This is just for the action and the barrels, no trigger, chassis, scope etc.
first barrel is 26” bartlein, about a proof comp contour- 700rnds $250
Second barrel is a fluted pva osprey 24” with -1000rnds. -$300 Both chambered in 6gt.
5/8x24 thread on both. $1100 for the action. $1500 takes the lot, shipped to your ffl. Or I can ship barrels to you and action to ffl.

Attachments

  • image.jpg
    image.jpg
    3.3 MB · Views: 120
  • image.jpg
    image.jpg
    2.2 MB · Views: 119
  • image.jpg
    image.jpg
    2 MB · Views: 116

Accessories Rings, etc

All used good condition. All prices shipped. PPFF or Zelle preferred. PM questions.

Badger 30mm 1.4" steel rings - $90
Badger M40A3 (30mm .883) rings - $old
Spuhr Aesthetic 30mm 1" cantilever w/ accessory cap - $150
Seekins 30mm .82, sniper grey - $90
Nightforce 34mm 1" 6screw - $old
Nightforce 34mm 1" 4screw - $old

Hawkins 35mm .885 - $90
Leupold 35mm 1", FDE - $90
Spuhr A0019D low pic rail - $95
KAC pic bubble level - $185
Tubb ELR 34/35 bubble level - $90

1000005347.jpg

Optics REDUCED Swarovski SLC 15x56 for sale

Like new in box with everything they come with from factory. Glass is crystal clear. Also have the adapter to mount to tripod. These sell for $2399 and the adapter is another $195 + tax.
$1700. shipped to lower 48. Check or postal money order only.

Attachments

  • IMG_1517.jpeg
    IMG_1517.jpeg
    411.3 KB · Views: 301
  • IMG_1516.jpeg
    IMG_1516.jpeg
    527.7 KB · Views: 295
  • IMG_1504.jpeg
    IMG_1504.jpeg
    408.9 KB · Views: 290
  • Like
Reactions: Bigrederic

Optics Iray rh50r thermal

Like new iray rh50r with factory box, mount, rings and other factory stuff. Has the 2 factory batteries and also have and extra battery that was 200$ that’s still in the box that I’ll throw in. Great shape and great resolution with built in range finder and ballistics app. Only used a couple times just don’t have time to go much anymore. 5,000$ shipped to your door

Attachments

  • IMG_7368.jpeg
    IMG_7368.jpeg
    326.5 KB · Views: 57
  • IMG_7367.jpeg
    IMG_7367.jpeg
    328 KB · Views: 64

Bringing extra fuel into Canada

I am heading to Canada soon and am wondering what your guys experience has been bringing in extra fuel. We are going bear hunting and bringing a boat and 2 side x sides. We want to bring some extra fuel for the truck and both machines.

The best I can tell we are good to bring 30 gallon across the border, Or would it be better to take empty jugs and fill them in Canada.

I have several of the VP racing fuel cans. Any issues using them?

Accessories 26” PVA 6GT origin prefit, 1:7 twist 5/8x24

Pictured here is a 20” Proof carbon fiber Origin prefit. 1:8 twist, 5/8x24 muzzle threads. I bought this to use in rucking matches and/or NRL hunter but I just don’t have time to do multi day events right now. I shot a single one day event with it, it has about 125 rounds on it. I’d like $500 shipped for it. SOLD

There’s also a 26” 6GT Origin prefit I got through PVA. 1:7 twist. I think it’s an M24 contour. I shot about 75 rounds through it and it shot fantastic but at the time (and still) I barely had time to reload so I got a 6ARC prefit for cheaper factory ammo options. I also have way too many barrels. I’d like $400 shipped for it.SOLD

Attachments

  • IMG_2146.jpeg
    6.5 MB · Views: 114
  • IMG_2147.jpeg
    IMG_2147.jpeg
    2.3 MB · Views: 93

Suppressors 30 cal YHM Phantom ti review

First time at the range with my new can! My hosts are a DPMS LR 308 and a Ruger SR 556. I was really happy with both if you are in the market for a 30 can look them up. The mount on both guns are ROCK SOLID and easy to use. I confirmed my 100 yard zero with my 308 first with some new factory ammo hornady Z max 168. I put on my can and gave it a go... no change in zero and quiet as all get out and felt recoil was cut in half. People at the range started asking questions and was taking video even..haha Later a guy showed up with a surefire 762 can and sat right next to me. we talked and both of us were excited to try out our cans shot for shot. He wasn't too happy because his was louder and others on the range all agreed that the phantom sounded better. Funny that mine was almost half the price and wayyyyy lighter to boot. I really happy with it!!! If you're in the market for a can look into YHM. oh and don't mind my 7 month old in the picture he is just getting into shooting.....hahahaha

Attachments

  • image.jpg
    image.jpg
    1.3 MB · Views: 85
  • image.jpg
    image.jpg
    1.5 MB · Views: 85
  • image.jpg
    image.jpg
    943.2 KB · Views: 85

How to remove weight from a foundation Samson

So I ended up getting a foundation Samson for my Terminus Zues QC. It came with the brass weight/rail. Way too heavy, switched to Aluminum and removed ALL Brass I could find. Still to heavy. I like the stick but it is too heavy still. I could try to sell it ( with both sets of weights) or find a way to remove another couple of pounds. Not sure how much ditching the black top weights buys. Not sure how to safely bore out the butt stock. Any ideas?

SOLD WTS: Used Raw Chad w/tuner .264

For sale one catch and release Chad muzzle brake, I found another brake that I wanted so this one is moving on.

This is threaded 5/8-24.

Shipped TYD in the lower 48 for $425, PayPal F&F or Venmo.

Attachments

  • IMG_4066.jpeg
    IMG_4066.jpeg
    809.2 KB · Views: 28
  • IMG_4065.jpeg
    IMG_4065.jpeg
    763.2 KB · Views: 25
  • IMG_4064.jpeg
    IMG_4064.jpeg
    1,020 KB · Views: 24
  • IMG_4062.jpeg
    IMG_4062.jpeg
    1.6 MB · Views: 24
  • IMG_4063.jpeg
    IMG_4063.jpeg
    510.7 KB · Views: 26

SOLD PROOF ELEVATION 300PRC MANNERS LRH

Proof Elevation 300PRC 22”
Manners LRH High plains
Hawkins M5 DBM bottom metal CIP length
2x MDT CIP 300PRC magazines
Hawkins hinged floor plate
Pelican 1750 with closed cell foam cut to fit.


Approximately 40 rounds through this.

$4200 shipped and insured.

Trades:

-Manners LRH NV SA 700 footprint high plains
-Area 419 zero press standard V2


IMG_9653.jpeg
IMG_9654.jpeg