Payment via discreet Paypal FnF or Venmo. Shipped via USPS priority.

Surefire MB68AR Muzzle Brake. Overall in decent shape but does have some dings from use. Threaded in 5/8x24. $200 shipped.

Just picked up this awesome AXSR chassis for my Impact BA. I've learned to expect fitment issues with these trigger hangers so here's my question:

The chassis has a "magazine stop" if that's what it is called. I removed it because the front of the trigger hanger interferes with it. My single stack mags feed flawlessly - no issues at all. However, without the "mag stop", a little upward pressure on the mags place the feed lips in front of the bolt and it cannot forward travel. Not a big issue, but I am asking if AW double stack mags and their different feed lip geometry would allow the bolt to pass over?

I've had some custom builds where upward mag pressure touches but does not impede forward motion of the bolt, and one or two that did, so this is not new to me. I had AW mags a long time ago, but my 6.5cm rounds kept springing out into the dirt so I switched to single stack ever since.

WTS NEAR 34mm Alphamount
$200 $175 shipped SOLD

If paying by check, it must clear before shipping. I have PayPal and Venmo ,you cover fee if you choose secure PayPal.

Very Hard to find and long Discontinued Spuhr SP-4016 CantiLever Scope Mount. 34mm Rings and 1.50" Height and 0 MOA Cant. Perfect for Offset AR15 or AR10 Platforms.


$400 Shipped.

***Reduced to $375 Shipped TYD***

F/S MDT Ckye-Pod gen2 single pull standard . Near new condition. BTC clamp.

$500 obo shipped CONUS.

I’m selling my KRG W3 and looking for a chassis that checks certain boxes. My goal is to have a chassis under 2.25lb to shoot NRL Hunter lite division but can be weighted down to ~7lb for PRS and 22LR competition.

My barreled action, trigger, scope, etc weight in at 9lb 5.2oz so pair that with an MDT mountain bipod I’ll be at around 9lb 10.8oz.

My current plan is the XLR element with smokes carbon fiber buttstock. I’ve also looked at the new MDT LSS gen 3 but am not sure I can get the total chassis weight under 2.25lb. The modularity is intriguing though. I’d like MPA but even the Lite is too heavy. Vision makes a hybrid which seems very similar to the element but doesn’t have the ability to add internal weights. Unltradyne is the same issue, no internal weights. Any other suggestions?

Will need rubbers on the side of the clamp replaced. Great shape otherwise. Moved to a tactable. 40+shipping

Selling a Halo XRF for a friend. Operates as it should. Was his main scope for 1 season and backup for 2 seasons. He is an NVISION dealer and the scope will be sold as a demo with full warranty. Comes with a bobro mount.

Selling an old scope that I had on a 22 AR. It’s a Cabelas LR scope 4-16x44. 30 mm tube MOA turrets and reticle. SFP reticle. I use MRAD now so no need.

Mounted in a Cabela’s single piece cantilever mount. No trades unless you have a Vortex Diamondback scope with MRAD, would be plus cash in my end.

$200/obo, buyer pays shipping

Up for sale is my like new, 1994 Leupold Mark 4 M1-10X with premier reticle conversion done sometime in the early 2000’s. This is an extremely hard to find optic, not even taking into account the like new in box part of it. Box isn’t in the greatest shape but it’s there.

$1500 shipped
PayPal F&F, Venmo F&F only.

Brand new in the baggie.

I'll cover shipping & shipment insurance.

No trades. PayPal, Venmo, and Zelle will be accepted as payment methods. Friends and Family or the buyer must pay all fees for a 'Goods and Services' transaction.

The first "I'll take it" in this thread gets the item stated.

$30

Ended up with a 50% off any FDN-17X or FDN-25X scope. I picked up used a straight 10X which I was really wanting instead off of the forums. So this is catch and release. Good until 10/25, 250$
Z

SOLD

$425, shipped within USA. No international shipping.

RRS Anvil 30 Arc head as described here: Anvil-30 & Two Vets conversion bowl as described here: Conversion Bowl

First posted "I'll take it" in this thread trumps any PMs. Venmo or certified check please. Thanks for looking and please let me know if you have any questions.

/Steve

​

Has anyone used either the bell & carlson or hr precision M50 style stocks for the howa mini?

I'm wondering if either of them have the thick and weird palm swell that the traditional remington 700 pattern ones did.

Proof Research barrel for RimX
21.25”

$420 +

PPFF, Venmo Gift, Zelle

Christensen Ridgeline .300 RUM

At only 8.5 lbs, this is a great backcountry, big game hunting, precision cannon. I took this bad boy on two successful elk hunts and they both dropped in their tracks. Haven’t shot it in years, time to go.

RCBS dies
200 pieces of fresh Norma brass
23 pieces of 1x fired Norma brass
27 pieces 2x fired Hornady brass

I don’t remember the exact load data I used, I had a knowledgeable buddy helping me with it and he did most of the work, but I have five unfired cartridges that can be deconstructed if you so choose. Around 100-120 total rounds fired.


$1995 for the full package

Will separate as follows:
Rifle: 1650
Die set: 175
Brass: 360

PPFF, Zelle, or Venmo (no fees).

Potential partial trade considered for Leupold Mk5HD or Mk4HD with PR2-MIL reticle only.

Welcome to the fucking party pal; 5 years too late . These kids will never forgive nor forget what those cocksuckers did . Neither will I.

Anybody?

DT SRS .308 Conversion Kit. $950 Shipped SOLD
- (1) 22" DT SRSA2 1-11 twist .308 barrel. $560 (Thunderbeast 3/4x24 Brake) SOLD
- (1) A2 .308-faced bolt assembly. $320
- (4) SA Magazine. $70 each
All SA Magazines will come with original bottom plates.

Like new gen 3 razor. I don’t think it has a scratch on it. About as mint as they come.

EBR 7D reticle

Aadmount scope caps
Grey Ops mount. 0 MOA and 1.26 height but I will have to double check that.
Accessory pic rail
Bubble level

Scope as pictured with mount and caps

$3000 $2800 $2600 shipped

Scope with caps

$2700 $2500 $2300 shipped

I've seen Bear Creek Arsenal barrels maligned here on the hide so I thought I would share this video of mine. I get no compensation from BCA, I'm just impressed with their accuracy. Here is a 16" run of the mill M4 barrel with A frame sight that I used to build a SOCOM SOPMOD M4A1 Block II copy. I easily get 1/2" moa and not just at 100yds. Here is a video of a test fire (gun is for sale on GB as SOCOM SOPMOD) at 350 meters...LESS than 1/2 moa.

Login to view embedded media

MPA Ultralight

Aero Precision Solus barreled action in 6.5 CM

TT Special

$2350 shipped to FFL

Pulled out my old Badger Ordnance m2013
(serial #4) .243 a few months back and decided to give it a new life. Had my local smith spin up a 16” .308 proof carbon barrel for it as I wanted to do a dedicated suppressed .308 build. I have an older manners T6 stock for it but wanted to update it with a new lighter offering from Manners. I placed an order online for a stock and then received an email back from them saying they don’t inlet for the Badger Action anymore even though it’s still an option on their website. I called McMillan and the only stock they still cut for the Badger is an A5 which would be much heavier than what I’m looking for. Can someone like Jeff from Rivers Bend or LRI take a Blank Manners stock and inlet it for me? Hoping I can find something or make something to complete my lightweight build.

MANCHESTER, KENTUCKY. 02/15/2025

(Full details limited at this moment as case is still under investigation. Identity of the minor may also have been concealed to protect them.) Two armed men broke into a Manchester home with the intention of stealing more firearms when a juvenile who was home alone at the time saw them entering, retrieves a handgun and opened fire on the home invaders, fatally wounding both. The juvenile then fled the house through a bedroom window and presumably alerted a neighbor who called the police. Kentucky State Police detectives arrived on scene to find both would-be home invaders, 44 year old Roger D. Smith and 51 year old Jeffrey M. Allen, deceased on the property.



Some takeaways:

First of all, AWESOME shooting by this juvenile. They have been trained well and knew what they were doing and how to handle such a situation which would make many grown adults freeze in their tracks.

Second, if mandatory "Safe Firearms Storage" laws that are active in many Democrat cities had been in place here, the chances of this child not being able to retrieve his/her own gun and ending up being a casualty of the violent criminals is extremely high. Armed home invaders who are specifically after drugs, weapons, or drug money have a track record of being especially ruthless when confronted or spotted during their crimes.