Second time this guy has been suspended... How many times wasn't he caught?

This should be charged as rape, not simple assault.

This is what also happens when you state is a single-party leftist/communist un-American travesty... being ruled by a small urban, socialist elite. Which wants (and has built) its own Stasi. And when you hire shit who will do whatever told to keep their jobs, tolerate bad behavior, and make the career path undesireable for all but the most un-qualified candidates. And then promote for DEI instead of merit or competence. The whole organization needs to be dismantled and rebuilt from the bottom up. Too bad that the DoJ probably won't dig into it... They should!

Hope this guy likes buttsex as well as BJ's. Because he needs to go to the worst prison in Mass and get passed around until he dies...

Sirhr

New condition terrapin X $1000. Will FaceTime or verify however you want

Used l3 lwts Purchased new and used a couple times a year, has one dead pixel zone that is visible when used as a clip on; solid and flexible unit.
$5000 or reasonable offer
L3Harris Light Weapon Thermal Sight (LWTS) is a handheld and weapon-mounted thermal weapon sight. The thermal imaging capability of the LWTS allows for long wave infrared observation and target identification under adverse conditions including light rain, smoke, light snow, and low light to total darkness. The LWTS utilizes leading edge 17 micron technology in a 640×480 uncooled microbolometer. The high resolution display, combined with state of the art image processing and electronics provide exceptional imagery and long mission run times on a single battery load. The LWTS is highly versatile, being able to deploy as a stand-alone thermal weapon scope or a clip-on thermal weapon sight in front of an existing day optic. As part of the current USSOCOM contract, the LWTS (AN/PAS-13G(V)1) is designed to integrate with weapon systems outfitted with other SOPMOD optics. It is rated as a short range clip on sight that works best with 1-4x optics such as the Aimpoint M68CCO (Comp M4s) and Trijicon ACOG. When paired with another day optic, the LWTS produces less than 2 MOA shift in point of impact. However, the LWTS can be used alone with its internal reticles. This gives operators extreme nighttime capability when paired with head-mounted night vision goggles. The LWTS is intended for light weapons utilizing the standard issue 5.56x45mm and 7.62x51mm NATO cartridge. The size and weight make it ideal for tactical small arms such as the FN SCAR-MK16/17, M4/M16, SR25, and other 5.56/7.62 platforms. The LWTS is powered by a removable battery cartridge loaded with four AA batteries. The system comes with a spare cartridge so that batteries can be changed quickly. It is optimized to provide the best image when paired with 4x magnification, but can be used with scopes up to 5-6x without much loss of image fidelity due to its native 640×512 sensor. This high resolution sensor provides incredibly crisp detail and shading for rich images and easier target identification. Another useful feature is the RS-170 Real Time Video In/Out for remote viewing when attached or detached from a weapon system. Export of Thermal Imaging Equipment or related accessories (such as manuals) is strictly regulated by the US Department of State in accordance with the guidelines of the International Traffic in Arms Regulations (ITAR). It is a major crime to ship or carry US manufactured thermal imaging devices outside the borders of the United States, punishable by fines and prison sentences. Ignorance of these regulations will not hold up in court.
Buyer pays shipping, item will only be shipped to a US address

Selling three bricks of Lapua Center-X that my rifle didn't like. Two are full and one is missing 50 rounds from when I tested it. All same lot. Asking $360 plus actual shipping. Paypal f&f or Zelle. Not looking for trades right now.

Fuzion SA RH 308 bolt face. Has 2250 rds through it. Normal wear from use. Gunsmith lapped the lugs a little so I wouldn’t recommend using it with a prefit barrel. $SOLD

Just dropping this here to open discussion about TKF.
9.30 min mark gets to the point fyi.
Login to view embedded media

$100
I have a Vortex 30% off cert that it doesn’t look like I will use. I used one in January to get a Razor Gen 3 for $2099
I can send a pic of the code so you can use it immediately.

Both are brand new.
( 1 ) 5/8x24
( 1 ) 1/2-28

$100 each shipped PayPal f/f

Yes. You read that correctly. Share your poop. This is an inclusive thread. All poops welcome
Colon health is no joke. Sharing is Caring my friends.

So, share your poop.
The farts before hand are welcome and encouraged in this discussion.
The exit (did you pop a vessel or two straining, was it a slow slide, deer poop size nuggets, monster that felt like birth of an elephant, or was it the spray explosion post Taco Bell kind).
You can share if it was a ghost poop (you know you pooped, but its not where to be seen in the toilet and was a clean drop with nothing on the TP on clean-up, or did it resemble an oak trunk and need a Poop Knife and a plunger to get it to go down).
Describe the smell. Did you make a face at your own stink? Admit it, you know you have more than once in your life.
How many squares of TP did you use? Did it require multiples? Did it require the wet wipes hidden for the messing ones?

Extra points for multiple flushes required, swirling your butt around because it was like soft serve and just wouldn't stop, and good descriptors of your last meal based on what you see.
Automatic prize mailed out if you see AOC or Pelosi's face in your deuce (like people see Jesus' face on toast) and you get a pic. Must have your Hide handle and date on a sticky note (or square of TP cause who has sticky notes in the crapper) to count.

Also, for some of you, a Shart is a real occurrence. Not all of us are old or lacking in O-ring power for that to be a reality, yet, and we still want to hear about it. Extra points if its the kind where you just toss your shorts (if you wear them) and go commando the rest of the day. For sure the best reason to wear underwear right after an accidental catching of your little buddy in your fly during zip-up.

The above are suggestions for how to format your post. Not requirements.
The good news is, we will get a lot of details here. Not like when you tell your wife that your friend is getting a divorce and you have no details to answer the 378 questions she has about it. Every man knows all the details when they drop a satisfying deuce.

So, share your poop!!

Up for grabs is a NEW Atlas Cal bipod with Hawk hill spiked feet. (Comes with facotry rubber feet) On top is a Area 419 QD ARCA mount. Needs a new home! I currently have no use for it. $325tyd

Vortex Razor Gen III 1-10x24 with EBR-9 MRAD reticle. Includes Switchview throw lever, box, and paperwork. $1650 shipped.

Payment: PayPal F&F, Venmo F&F, Zelle, CashApp, or Apple Pay.

Trades (+/- Cash):
-A.R.M.S. 22M Rings
-DD RISIII FDE Rail (10.5")
-Larue LT104 34mm

I am trying to decide between RimX, Vodoo V-22 and new, soon to be released Tikka T1x ACE. I know Tikka hasn't been released, I have Tikka T1x 20" in MDT Oryx chassis (see the pic below) and it has been very accurate, so I am leaning towards Tikka T1x ACE. Is RimX or Vodoo give me better accuracy than Tikka ? What's the consensus of RimX vs Vodoo in terms of accuracy?
I am not planning to compete much, maybe some. This is more for benchrest shooting, plinking and similar activities.

T&K Hunting binocular harness, size medium

$125 shipped

Cut for Impact Precision action
6.5 Saum 18 inch Bartlein Rem 700 Sendero/varmint contour #13 I believe. See pics for measurements.
Barrel weighs 3 lbs even.

Averaged 2877 fps with Prime factory ammo with 142 SMK bullet.

I purchased it new off gunbroker from a gunshop that had it spun up by GA Precision for a lightweight hunting build that they never did. I put approximately 200 rounds through it of Prime factory ammo.

$525 shipped lower 48

Please PM me if you want it. I will onlybrespond to your PM. I am happy to send pics with date so you can be sure you are paying correct person. Beware of scammers.

- Keymicro Suppresor adapter 1 1/8-28 thread (Alpha) - $75 Shipped
Moved over to Reardan and don't need anymore, never had any issues.

Hello,

I am new to reloading and am starting with the basics, but I eventually want to start loading for my 7mm PRC.

I see a lot of people using automatic dispensers that claim to be accurate to 0.1gr for general reloading, but I was curious if those are accurate enough to meet/exceed factory match ammo, and what most people use for handloading for “ELR”. I intend to use h1000, but I am open to recommendations.

I was also looking for die recommendations, I see hornady has some match dies, but wondered what else people are using.

Thanks for the help!

Relocating from the west coast to the east coast.

Put together a quick sale to celebrate a little.

Discount auto applied at check out,
orders placed before March 10th, will go out within 1 business day.
Orders placed after that will ship out on March 20th.


Login to view embedded media

Wtb srs lite but will consider the standard srs if it’s black. Needs to be fixed interface not xtn since i have the folding adapter for fixed interface.

Aimpoint ACRO like new with scalarworks mount
$450 shipped

Selling mounts I’m not using:

X2 5/8 non timer SR unused

X1 1/2 non timer SR unused

X2 5/8 CB unused

$125 shipped for each SR

$110 shipped for each CB

Can make a better deal on multiples purchased.

PayPal f&f preferred

Like new condition KRG Whiskey 3 (Gen 6) with enclosed forend for Tikka actions for sale. Full list of what's included:

• KRG Whiskey 3 non-folding chassis for Tikka actions
• Enclosed forend
• ARCA Rail
• Flat Bag Rider (heavy)
• Angled Bag Rider (lightweight)
• 3D-printed flat bag rider (lightweight)
• Fat/lrg grip (installed)
• Thin/med grip (included see pics)
• (2) short pic rail sections
• Sling stud
• Action screws

Looking to sell it all together; this chassis is totally baller and this listing includes most of the accessories available for it; I've managed to get lots of different BAs balanced in this thing and it made for a nice positional gun with a 18" SS barrel in it.

SOLD

Gen 6, no trades, takes CTR or AICS mags (except for Magpul polymer), all in, I don't know what it weighs in this or that configuration and I'm not taking it out of the box again, let's get this done.

Almost new press.
Only loaded around 200 rounds.
Comes with the Abor die conversation kit and a Lee bench plate kit.
Long and short handles.
$260 TYD.

Selling these off don’t need them anymore

2200ct 75gr ELDM
Wilson Die
KM mandrel .003 tension
180ct Lapua

It all stays together not splitting up

Asking 800$

Looking for. Short action Magpul hunter bottom metal