Prefer local sale or pickup at a match I'm going to.
I'm in Idaho or Eastern OR

Brand new in box. Will ship on buyers dime.

$160

Brand new, still in wrapper. Going a different route
$185 shipped PayPal f/f

FOR SALE: Athlon Ares ETR UHD 1-10x24 w/ ATMR3 IR MIL Reticle

Key Features:
UHD Glass – Ultra High Definition

ATMR3 Illuminated MIL Reticle – Designed for rapid target acquisition at low power and pinpoint accuracy at high magnification

True 1x to 10x Magnification

Whether you're running a DMR setup, a duty rifle, or a competition build, the Ares ETR UHD 1-10x24 delivers elite performance without the premium price tag.

Condition: New in box with all accessories
Price: $700

Hey all,
Selling a few scopes to clear some funds for house projects. Below are three scopes that are in great condition.
New in box LRP S3 6-36 Mrad $1600-----SOLD
Steiner T5XI 3-15 SCR Mil with JP mount $900-----SOLD
Trijicon credo 1-8 MOA Red/ Green W mount $800--------SOLD

Let me know if you have any questions. NOT LOOKING FOR TRADES ONLY CASH.

Thinking about parting ways with my 6 dasher set up. I had it put together last year by A team precision and have only had time to shoot one match with it.
It has a Manners PRS 1 stock, brand new Impact 737 Action (150 rounds on it), trigger tech trigger, 26” Hart barrel. Scope is a Bushnell XRS 6-36.
I also have all the components to load for it.
Appx 5 pounds Varget, 800-900 Berger 105s, 200 pcs Alpha brass (55 virgin), whidden dies. I’m sure I’m forgetting some details. Message with any questions. Located in Crossett, AR.
$4700 for everything. Shipping would be on buyer.

$205 per box, 5 boxes available (2,500 total projectiles)

All are same lot, all unopened.

Shipping will be added at my cost or buyer can provide a label, I would expect $7-9 for a box and $25 for all 5 boxes.

Can take all the usual electronic payment methods or check/USPS MO if needed.

Selling my Athlon Heras spr 15-60x56 that's in great shape. I couldn't be happier with the glass, even up to 40 or 50 power. Tracks perfect.

Comes with everything in the picture:
EGW rings
Level
Caps
Box/sunshade/ etc.

Sold

MDT Carbon Rifle stock in black. REM 700 short action with precision bottom metal. Has 211 rounds and is mint. Includes a couple extras

• Backfire butt pad
• MDT adjustable butt pad plate (not pictured but included)
• MDT 1/2” weighted buttstock spacer

$1,250 $1.150 shipped

For sale are boxes of new unopened ADG brass.
4 boxes 7 PRC all same lot. $360 shipped
4 boxes of 300 SAUM all same lot. $360 shipped.
Electronic payment accepted.
No trades needed unless it's a S&B fixed 6x42.

Can you experienced folks share your thinking/ considerations regarding flush cup type (when you use Full rotation, Limited, or Nonrotating cups?) and mount locations?

I have seen folks mount them on both sides of the bolt, sometimes with rear swivel high, mid and low on the stock. Usually see the front mount toward the front of the stock, but have also seen them mounted toward the rear of the forearm and being used to grip the sling as a shooting aid.

I am about to add some QD flush cups to a bolt hunting rifle. I have very limited experience with them and have always had my sling mounted in the traditional location. Figured you folks could steer me toward the most comfortable/ practical setup.

I need a FFP / MIL scope for the PRS rig I'm putting together and I've took a shine to the Nightforce 7-35X.

I realize that for PRS I'll mostly use it in the middle of the magnification range to get the wider field of view but I'm hoping that with the fine centre dot I can also use it in F class where the extra magnification will come in useful.

Anyways I've looked at the MIL-XT and Tremor3 reticles, both have the "Christmas tree" type reticle which I have never used before but I feel that for PRS where I'd probably be holding over as opposed to dialling such a reticle would be very useful.

I personally like the MIL-XT better (its cleaner / not so cluttered) but I'm curious what those with PRS experience under their belts think as to which is the best fit.

From what I have read the Tremor reticle is very well thought out and can be tailored for any situation (once you get your head around it).

This will be my first non MOA scope too so that will be another thing to learn.

This rifle is new (other than test firing by WTO)

Action: West Texas Ordnance Caprock (Lonepeak Fuzion alpine cut) with switch lug
Stock: Foundation Gideon in Foundation hunt color
Trigger: TriggerTech Special
DBM: Hawkins Hunter
Barrels: 24" 6.5 Creed and 24" 7 SAW, Both barrels were test fired for accuracy by WTO, they are similar to a Medium Palma in contour. Both barrrels are coated black with blended thread protectors.

Located near DFW TX

No trades

so , i built a 300 norma on an mpr BA comp chassis . when i built it , i installed a Fat Bastard brake on it and it doesnt quite do the job well enough . The REcoil is fairly high and it doesnt really bother me but it keeps pulling my bipod off the arca no matter how hard i tighten it and it would be nice to get back on target a little easier . So , question is , what do you guys use on big magnums ?

6.5 CM chambered by Altus shooting is available for sale

there are 2 small scratches on the chassis that is shown in the picture.
Specs:
Defiance Ruckus Tactical Medium action black Nitrided
Proof Research 6.5 7.5tw Sendero light contour (should be around 600 Rds down the barrel)
Area 419 Hellfire self timing brake (DLC is belmished)
Triggertech Primary Trigger flat shoe
MDT HNT26 Folding Arca

will include 50 pieces of new Peterson srp brass for free.
(Scope is not included)
load for Barns LRX 127grs will be provided.

Price: 3000 Plus shipping to FFL

Not sure where best to post this, assume this forum is section is as good as any.

I am planning to fly to Europe which likely involves going through the USA with a rifle.
I've done a lot of research and found the requirements for travelling to the USA (need a ATF 6NIA form) but have read that it is not required if just transiting the US. I have applied for a 6NIA form anyway but not sure it'll be approved as I don't meet the requirements (don't have a hunting permit or a US match invitation).

I have read if you don't clear customs that you don't need any paperwork for the US, but I'll likely be going through LAX and need to change terminals which requires me to clear customs.

Has any of the foreigners on the Hide been in this situation and can offer guidance?

Seems these folks don’t give up. I think I must have been one of the very first to get these text messages…Pay now or else. When the date passed, the messages went away.

Well today I got another one. My toll with “EZ Pay” still needs to be paid

Messages come from an extended number so I checked it out.

Seems awfully strange that the Florida DOT Collects its tolls in the PHILIPPINES? .

Stainless Benchmark, 4-groove, 16.5tw, button rifled, 26" or shorter finish length rimfire barrel blank.

Asking $440 shipped.

Excellent condition NF 4-16x42 F1 model # C615 with Mil-XT reticle. Comes as pictured with box and flip caps. Glass and mechanics are perfect, a couple very light/small cosmetic marks on the tube.

$2140 shipped
**sold to faylix**

Im trying to find where i can get one of those 3d printed powder covers for the autotrickler v4 that blocks powder from getting under the scale. I added a Pic that I found but he could not remember where he got it. Thanks.

I have been shooting a Bergara for NRL 22 and want to upgrade to a Vudoo eventually but don't want to spend that much at the moment.... So I was thinking I could buy the chassis now and use it for the B14 for now, then get a Vudoo Barreled action later.

Not sure if that's the best plan, but seems logical while sitting here with my 1st drink of the night..

I would like to know what more experienced shooters think and then which chassis... I was looking at MPA and MDT but don't have any experience with either but I really want to look cool, even if I don't hit anything.

The Dynamic Carbine Course is designed to train participants in rapid engagements, covering distances from 5 to 200 yards. Students will develop the skills to seamlessly transition from rapid, close-quarter engagements to effectively establishing positions for engaging longer-range targets up to 200 yards. This course enhances fundamental carbine techniques while emphasizing the critical mental adaptability required to switch between the two engagement methods.

Time & Location​

Jun 14, 2025, 8:00 AM – 5:00 PM
Sanford, NC, USA

So just a question,

With the new ruling from the supreme court, a bunch of cases are going back down to the lower courts. I'm in NY. From my understanding if Maryland where to overturn the AWB, states such as Maryland, NJ, NY would also be overturned? Does anyone know when this case is going before the 4th circuit for a decision. I know it's just a pipe dream they would overturn it, but I'm curious.

Anyone using or tried it ? Did a search and nothing came up so thought I would ask .

Area 419 autotrickler cup and 3d printed parts
$80 OBO shipped