Hornady once fired brass. 118 pieces.

$50 shipped

AMP Annealer MK2

Like New condition

Also comes with included shell holder (not pictured)

I have only used it to generate a few AZEK codes on some new brass lots

Sold shipped

Hey guys,

Looking for the NXS 5.5-22x56 with MIL-R reticle. It's product C528.

Need specifically this scope for my mk13 mod5 because I'm too poor for the S&B scopes, and I figure the NAVSPEC is super expensive.

Feel free to post or send me a message if you've got one and we can talk.

Thanks.

This rifle is built around a Savage 12FV action which sits in an XLR Element Magnesium ambi chassis. The chassis has both built in level and full length Arca rail.

Criterium 6GT barrel (brand new) with Area 419 Hellfire brake is properly torqued and headspaced using an NSS stainless barrel nut and squared lug.

The buttstock is a B5 systems PRS stock adjustable for length and height and is attached to the chassis with an XLR folding adapter.

EGW 20 moa rail is mounted/torqued to the action



Also included:

Original takeoff .223 barrel with less than 300 rds on it. (This barrel shot .5moa with factory GMM 77 gr SMKs.)

Easy bolt lift bearing installed along with Savage BA bolt knob

Proper bolt head and collar for .223

Mags for each caliber

NSS barrel nut wrench

Savage factory stock

$1100 $1200

Optic not included

Selling my MK5HD 3.6-18 with H59 reticle. It is flawless and tracks true. Comes already mounted on a Leupold Mark AR cantilever mount. I bought these directly from Leupold. Sun shade is included and unused. $1600 $1700 obo

Would consider trading up for a high end 6.5 cm gasser

WILL NOT SELL ANYTHING SEPERATE UNTIL BARREL SELLS……

Bought this for an elk hunt that didn’t happen and will be years before another opportunity comes up.

Round count is 35, 20 factory hornady and 15 handloads to check pressure/velocity.

24” carbon proof for Zermatt / bighorn Origin. (Will not come with CB brake)

Forster full length sizing die and micrometer seating die.

297 starline small primer brass. 159 once fired, 55 new but mandrelled, 83 new untouched. ( I bought the brass off here and only fired 15 pieces through this barrel, the rest was fired by the previous guy)

For the above I’m asking $925 dropped to $800 shipped CONUS.

EXTRAS:

CB brake $120

762 Hornady 140 ELDM bullets
52 hammer 124gr solid copper
$325 for all bullets.

Open to trades toward 9mm pistols or other stuff.

What's up guys, hope everyone is doing well and out there killin it.

We've got our updated training schedule below.

You can register for all of our classes HERE, or click on the images. We've got a new Scoped Carbine curriculum out there, and we've got some more locations that are coming up in the fall and winter.

Check out that Tripod Masterclass drop date....

Stay tuned for more!

I have the following Tab Gear Shooting items For Sale.

TAB Gear Rear Bag V2, small, coyote color, used condition = $15
TAB Gear Rear Bag V2, small, OD Green color, new condition = SOLD
TAB Gear Pollok Shooting Mat w/ buckles, multi-cam color, used but good condition =SOLD
TAB Gear Bullet Binder, short action, coyote color, never used = SOLD

Buyer pays shipping CONUS. I accept Paypal and Venmo. Thanks for looking.

***** EDIT 20240510; NO, the PVA barrel nuts will not work when swapping two Ruger American predators. The barrel diameter is #tooThick ****

(BLUF / TLDR) --- can I switch these two RAP barrels using the bbl nut linked?
---------------------------------------------------------------------------------------------------------------------------------------------------

Right Hand Ruger American Predator .308

Left Hand Ruger American Predator 6.5cm

2x of these: https://patriotvalleyarms.com/barrel-nut-tikka-t3-ruger-american-sako-m595/

I already have go / no-go for both calibers

They share the same bolt diameter (check my math please)
---------------------------------------------------------------------------------------------------------------------------------------------------


(Longer Story and intent)

God has a sense of humor and decided I am to be left handed and left eye dominant so I very much prefer left handed bolt rifles. Both my kids are right hand right eye dominant with my 9 year old daughter needing her own bolt action deer rifle this coming season. She's killed a few with one my .223 ARs using handloads, but I want my rifle back. I bought the RH .308 RAP for $300 off a buddy and it's simply too much for my daughter with the 180 interlock load. I know I could load the .308 down with lighter bullets and a lower charge but I also have a left hand
RAP in 6.5cm. She isn't bothered at all shooting the 6.5cm.

From my limited knowledge over the past few months lurking the site, I should be able to gorilla break the factory barrel nuts off and swap them 1:1 after headspacing, correct?

Thanks for y'alls time and look forward to learning!

I want her to out-do the boys and handle herself

Trigger Cam 2.1

Very little use, good shape

I will post more pics in the coming days


$500 shipped

Have a two vets QD V1 tripod with D-Low 55mm ball head. It has been well used and looks like it, but everything functionally works perfectly on it.
Asking $375 shipped for the whole setup. One leg is wrapped in hockey tape for tripod rear and can be removed on request.


Edit: pics added

Was mounted on an AR15. Faint ring marks. Great condition overall, great glass. 34mm tube.

Comes in original box. $SOLD shipped PPFF.

Was mounted in an ARC mount on a 22LR bolt gun. Great condition.

Comes in original box with the sunshade. No caps or throw lever.

$SOLD shipped PPFF.

I have for sale a Burris XTR3 5.5-30x56 SCR2 MIL, Non Illuminated (Made in USA)

I got it from another Hide member, and haven’t used it much, but it tracks perfectly and has very good glass. It comes with the original packaging, sunshade, scope caps, spare windage knob, etc. as well as Seekins 34mm 1” tall rings, and a bubble level. It does have a couple small cosmetic blemishes on the tube, but nothing that affects function in any way.

SOLD

Have a really nice G3 mead that’s spent its whole life on a mini FIX in 223. Has a few small tics on the caps and mount screws from normal use.
Badger Condition One 1.54” mount.
Scope is in original box and includes everything it originally came with. Insurance is on you if desired. I will not reach out to you or start a pm, so be aware.
$OLD.
PP f&f, CashApp, Zelle, Postal money order

2nd Marine Division Marine Scout Sniper challenge coin. A great piece of military history, this challenge coin will be a great addition to your collection

Like new no box. One tiny mark. Fabulous trigger just dont have a gun to out it in. And trying to keep from buying one. 200 shipped. These are 300 triggers. This is the single stage model. Comes wint the shoe pictured

Almost three years ago I took my 1903A4 parts with a actual A43 receiver new Criterion barrel to Roland for assembly. He has moved to Heber Springs, Arkansas (I think). I am unable to get either and address or phone number for him. I'm about to go to the Heber Springs police for help retrieve my gum.

Any information as to ow I can contac him would be most appreciated.

Aimpoint Acro P2

Excellent condition. Lived on a Mini Mamba 22lr th at saw 2 range trips.

$480 shipped

Good condition. Functions great .. just don't need it anymore

$85 SHIPPED CONUS
PAYPAL F&F

PVS14 WP L3 tube 2692 FOM
Does not include mount, Wilcox PVS mount available for purchase if needed

Purchased from Sureshot nightvision

Spec sheet available via PM
Has some pepper specs, not an issue during use
see pics

Not a lot of use
Bought directly in 2021
$2900 shipped insured

Trades:
- Seiko MM300
- Omega Seamaster Professional 300 Co-Axial with White dial
- HK USP compact 9mm
- LMT MWS 6.5 creedmoor barrel
- Colt Python 6” (new version Blue or Stainless)
- S&B US with MSR2 reticle
- TT 3-15 Gen3xr Pre-tariff pricing
- Premier Reticle/Optronika 3-15 Tactical at a reasonable trade value
- Otter Creek OC5M

6.5 Creedmoor built on a Tuebor Precision bolt short action by GPC. Field Trigger Tech Trigger, PROOF 23" Stainless Barrel with 1/8 twist and threaded 5/8x24, Sitting in a KRG Chassis with Attachments and weights. $3000 buys it or $3500 trade. Leupold not included, but can be for an additional $1600 with rings. Leupold is a VX-6HD CDS ZL3 4-24x52 scope with a TMOA Illuminated reticle, sitting in ARC 34mm rings.

Modlite OKW 18350 weapon light with Modlite battery, Surefire Z68 tailcap and Arisaka MLOK inline scout mount. Never used or mounted. Does *not* include a charger.

$250 shipped. No trades. Discreet PP F&F (preferred), venmo, check/mo.

Have some 22 ammo for sale as well that I can post pictures and quantity of here if desired.

Individual prices below

ATS Barrel Tuner - $150 shipped
XLR Element 3.0 with arca rail, forend weights, OBi grip - $550 shipped
Barreled action - $550 shipped
Lothar Walther Barrel - $250 shipped
Action - $375 shipped
Scar 2 stage trigger - $220 shipped - SOLD
Scar scope rail - $30 shipped - SOLD

Super Trickler & FX120i

Brand new, only use was during set up and calibration with several powders

This is my last one

Feel free to PM with any questions
(I’ll answer inquires in the order I receive them, thanks)

Sold shipped