I got the setup from “the Horta “ himself. Awesome unit, but don’t think I’ll have anytime to use them this winter .
I’d like to get the original cost $6500 shipped. I will include extra set of rechargeable batteries and the charger. I have a new team Wendy xl helmet available at additional cost.
ONLY TRADE- high end scope (ZCO, Schmidt, etc.) and cash .
Link to the original ad:

Ordered and later changed my mind on this whole setup. Never been installed. All the fiber optic and heat shrink is uncut.

SOLD $85 shipped

Put it on and couldn't get it to fit as well as my other basic holster, so essentially new.

Sold $75 shipped

For Sale: Leupold VX-6HD CDS-ZL2 Rifle Scope: 3-18x44 FireDot duplex, Gen 1. Side focus illuminated with leveling.

This is a slightly used scope. I bought it new. It is an awesome scope. You won’t be disappointed with the glass. I’m selling it because I’m moving towards a competition based scope.

It comes with Leupold Alumina flip up rear and objective scope caps, box and Warne Maxima Horizontal 30mm Medium fixed steel scope rings, black -514 medium.


I’m asking $1,100+shipping/Insurance
Pal Pal F&F

Took these old school Berger 6mms in trade. I was told these were hybrids, but I can't find a PN on the box to confirm. They look like them to me. I opened one box for bullet pictures. Looks like some tarnishing on some of the bullets. 80 pcs per box, 480 total.

SOLD
$22 a box shipped
$120 for all

New blank a little over 29" long.

SOLD $350 shipped

I have a barely used Hensoldt Spotter 60 for sale. Have used once, maybe twice. Comes with everything as received from factory plus multi cam cover and RRS mount.

Price - $4000 shipped.

I picked up a Kelblys tactical SA for a deal and have an itch for a 25 short mag of some flavor. I have a 7 saum so I don’t want to run the risk of mixing up brass, it will be shot suppressed out of a 20’ barrel. Thinking the 25-300 wsm will have little more horsepower than a 25-6.5prc. Looking for a nice 800 yard and in deer rifle. Anyone have any experience with one? I’m thinking 270 wsm brass maybe better to start with than 300 wsm.. suggestions?

Anyone got an older used defiance tenacity SA on .223 bolt? Looking for one made before 2022 preferably. RH.

I am in the market for a spotting scope which will be used equally for range use and for hunting.

I have a couple of questions:

For hunting purpose for spotting and locating (not ranging), do people generally find the reticles to be a detriment (distracting clutter) or are they easily ignored?

Secondly, of the tactical type spotters (Hensoldt, Leupold, GPO etc.) are there any of this style that DON'T have reticles in them?

Thanks,

LMT MWS upper
Mlok
Painted green (Menards camo paint)
No BCG/CH
$725 Shipped

Leftover from a project that never got completed.

I have 10 of them, all 15" long. Inner and outer dimensions in pictures.

SOLD $100 for all of them. Or $12 each. Price is shipped.

Looking at a 6BR barrel for the AT-x, just want to make sure I get this right. Do the Gray Ops AW 6BR mags work reliably in the AT-x? I do read there's a mag block kit(HRD?) but spotty reviews? Any other options for this rifle? Aside from bending lips and pushings rounds forward, etc.

Let's please keep it to the BR.

Tks

Looking a set of fury 5000 with AB. Let me know with you got.

Both in mint condition, the 17x has been a safe queen it's whole life. The 25 has seen a few matches. Come as pictured with mount/rings and caps. 25x SOLD, FDN17x - 1600

I'll Start off this new thread with a Photo thread!!. I dove deep into the FX PCP Air Guns in 2022 and have really enjoyed them. Here ar the 3 I currently own. I compete NRL22 & Outlaw matches so far. I have not made it to a PRS RF Match with one yet. I plan to with the Panthera.

New in Box Spuhr SICS Chassis. Model CH000001, REM 700 SA, Black, 16” Forend

$1400

Please PM me if interested. Don’t reply to this post saying anything, scammers will PM you and try to get you to pay them.

Brand new unfired condition. 22” knights armament 6.5 CM upper. This is a new in the box upper. Lower has sold. Includes kac irons mlok sling attachment and buffer, as included from the factory

$4200

I bought 500 of the Barnes 112 Match Burners and was loading them up the other night. I was seeing some really strange seating depth issues so I busted out the calipers and the gauges and started measuring OAL and BTO on the bullets. I noticed a decent portion (about 1/4) where at least 10 thou off compared to the average on both overall length and base to ogive. Some were as bad as 15 thou. The OAL on all the bullets were not very good in fact.

Is this normal for these? Or could this be a bad batch? With the amount of these I can’t load for matches, it would actually be cheaper to just buy Berger’s

Milt Sparks mag carrier in black for the P220 or other single stack 45 mags
In new shape.
$50 shipped

Long shot anyone wants to give one up. Don’t care about cosmetics, as long as it functions properly.

Will sell as package deal or separated.

Impact 737 short action, 90* bolt throw and a 20” Proof Research 22 Creedmoor Sendero Light Carbon barrel with around 500 rounds through it. Threaded 5/8-24 and 8 twist. Barrel was chambered by Mark Robles, Radix Precision in Omaha. Shoots really well with 75-85.5 gr bullets, I just don’t hunt a whole lot anymore.

Asking
Action only: $1150
Action with barrel: $1700

I have to be missing something, lol. Had my mind set on a tikka t3x CTR in 223 for my kids to shoot. Come to find out, they’re no longer available in the US. I’m too OCD to buy used. Looking for something with a heavy barrel as they like to shoot. This will be for target shooting only. I’m afraid the thin barrel of the tikka t3x lite. Will heat up quickly with them shooting it back to back. Looking to stay at $1000 or less. Checked out savage, tikka, bergara. Not sure about the qc on the new REM 700’s. I have a few older ones that rock but, they’re probably 20+ years old. There just not many options with a heavy barrel in that price point. Is there something else out there I should be looking at. Not having much luck.

Ok first round of prepping virgin brass. This may be over kill for AR loads but its practice for new project soon.
Starline 223 rem.
1. Annealed brass(diy annealer along with templac 750 degree F
2. Ran through just the expander ball on forster die lubed inside of neck
3. Debur flash hole
4. Ran .22 cal bronze in drill press to clean necks
5. Chamfer and debur
6. Dry tumble to clean lube and debris off

Ok so my one question is virgin brass and new 20" WOA barrel. Do i carry on with load development while fire forming at the same time or load the brass on the low side then resize for the load development. Just curious on how my work turned out and will listen to any advice.

Factory ammo
1200rds
LC brass
40 30 packs
All on strippers
$650 shipped
Thanks