As new, flawless condition, not a mark on it. Scalarworks LEAP 34mm - 1.57" height mount. $250 shipped.

Let me know if you have any questions or would like more info.

***SOLD*** Modified PQP Joystick rest, fuzz button top with windage adjustment conversion kit included, carry handle. Front rubber pad has been replaced with an adjustable spherical ball joint. Has newer front support that is cut out to receive Superfeet without having to lift and potentially smash a finger. Rear has 3 printed receiver as well. 1000.00 located in Brenham Tx

STI 2011 in a commander size slide called the Guardian. 9mm. Not pictured but includes 2 more 126mm mags. Custom RH OWB holster from Gunners holsters in western NC. Excellent shape. Treebark gen 1 STI grip. These grips are impossible to find without spending a pile. This is an STI, not a clone, not a staccato. bull barrel no bushing. $1850 shipped

Login to view embedded media
I don’t have a dog in this sig shit show but I can’t scroll through my YouTube feeds without finding a few spontaneous discharges or Ka- Booms .

Missed our typical steak night on Saturday due to my oldest daughter having a soccer tournament roughly 2 hours away from home, so we did it tonight instead. Cajun ribeyes reverse seared. Brought them to 110°F on the Gravity 980, then seased in bacon grease on the Flat-Iron griddle with a cajun compound butter to finish. So. Damn. Delicious.

This is probably a stupid question and I have never had a custom rifle made, so not sure what can be done. First I will tell what I am trying to do and have done.

We are farming a small lot and are having problems with losses to varmints (crows). Maximum shot range is 200 yards, and we are running 22LR Subsonics because I do not want to alarm the neighbors. I was first using a Ruger 10/22 semi auto, not to good for subsonic. Ejection problems. Switched to a bolt action CZ Jaguar 28.625" barrel, because the long barrel really helps with sound suppression. With subsonics and the long barrel it is almost as quiet as a pellet gun..

However, with the long barrel we are losing some velocity on the subsonics, to an undesirable level. We have just started loading our own 22LR ammo using Cutting Edge 50 grain Bullets. That seems to be working very well as we can get a load specific to our needs. We do not have everything worked out yet, but are very pleased with what we are seeing. Since subsonic loads are on the light side, it is no problem to add powder to get the speed back to just below sonic. velocities.

The problem now is that the Cutting Edge ammo with 50 grain bullets are to long to feed, they have to be single fed. Also, the barrel needs a faster twist to stabilize the bullets.

So now for my stupid questions, could a .22wmr chambered rifle be reworked or made to work with 22LR ammo that is to long, maybe by bushing it? And then have a custom barrel made in a 22lr with the right twist rate attached?

Or could a wmr cartage be trimmed down to get the COL to the correct length for WMR ammo and then loaded with a .22lr bullet. If that could be done, it could be shot though a 22 WMR chamber with a 22lr custom barrel attached?

Thank you for your help, and if you want to tell me me how stupid of an idea it is, I will be ok with it as long is you give a good alternative.

Clearing out some shelves so stuff needs to get gone. First "I'll take it" gets it. Shipping is included in all prices. Happy to send more pics as needed via DM.
- Surplus Mk18 upper. All correct. Crane 2006 barrel, C stamped bcg. 2006 Kac rail and M2/Wilcox from another Mk18. LED drop in for the Surefire. Bore is nice, runs great. 2050
- M14 parts. H&R barrel with matching H&R complete bolt. Barrel looks virtually new inside/test fired at most. FH/gas system/ DAS stamp stock/sling. 675
- H&R M16a1 bcg. Nice shape. 250
- GBRS Winkler. Unused/box/everything. Discontinued. 675
- Sig Legion Operator Winkler. Tough to get. Unused/with box. 475
- 34mm NF rings. Mounted to test fit but never fired. 135
- a1 profiled (Braceman) 80%. Includes nice original a1 grip. 265
- ADM qd mount. 1in. 125
- Matech rear. 75
- Early Nt4 125
- Qrp low 75

My B14r has a 30moa base on it, I ordered a DNT The Scope, What height rings are yall running 1.250 truck axle barrel.

Mega MML receiver set. 16” Mlok. The Upper/HG are new and the lower has been used for 500rds. Sawtooth Arca rail is also new.

Everything for $850.
Without lower $700

+3 extensions for 20rd 2011 mags. I no longer need them.

$105 shipped for all three.

https://www.henningshop.com/Staccato_it-1519129.aspx?CAT=9996

This is the way

Howa 1500 24" Barreled action from Brownells, 6.5 creedmoor, "#6 heavy barrel contour" with 5/8-24 threaded muzzle

Round count is about 450. Mostly Federal Gold Medal Match


Price is $750 w/o the heavy rail and spacer; add $150 for those. Sorry for the clickbait title...

I am in Arlington, VA but i'll ship to any FFL.

I have a couple dozen feedback on TACSWAP and gunbroker. This is currently listed on GB too: https://www.gunbroker.com/item/1105219134

Gallery:
Login to view embedded media

Only mounted for one mag to zero and test. It works fine; I just don't like green. Has the ACSS Raptor reticle so it's not recommended for use on Triceratops. Includes everything that it came with from the factory.

$200
Price includes shipping.
I can only accept money orders or Zelle.

These four knives are made by a local maker out of Kearney, Ne - Mike Arehart. He does great work both forging and leather work.

Top to bottom —
Large hunter - $250
Skinner - $200
Warnecliff - $225
Small cleaver with horizontal carry button sheath - SOLD

If anyone believes accepting this from Qatar is a good idea. Should probably take a long hard look in the mirror.


This is absolutely a bad look, and Trump should be smart enough to not accept this gift

I just caught these, been patiently waiting and now, mulling over whether to jump in early or wait and see what others think? Any early reviews from the typical pre-public available folks like Big Jim Fish out there?

I need inspiration and just want to know what others are running. I have decision fatigue at this point.

Looking into the 1-8 for a nice mid range AR for competitions that would suit that best and curious the difference between the NX and the ATACR. From people who utilize both. Is the ATACR worth the extra $700 and what am I giving up by choosing the NX?

Geissele Super Precision AR-15/M4 34mm 0 MOA Optic Mount, P/N 05-405. New, never used, black in color, 1.54" tall, extended 1.16" forward. Used but very close to new condition.

$200 shipped, Zelle/venmo

Trades, 20rnd metal mags (Larue/kac 308 or Duramag 5.56), Crye 34x, whatever, slide into the DMs plus minus cash

Gently used, 3 mathes last season, great shape, multicam. $Sold

Good condition Zco, 420 with spuhr 6001, Have box and paperwork that came with it. Box is a little beat up. The scope is in good condition and has very little use on it. If you would like any additional pictures or have any question feel free to ask. I will not separate or trade. $3100 shipped via UPS with insurance. I accept PayPal FF, Venmo FF, with absolutely NO NOTES, check or money order ( needs to clear before shipping). I will only deal with established members with positive feedback. Thanks

Brett

Selling a new unused Gen II KRG Bravo in Sako Green for Rem 700 SA and is right handsd. Comes with original accessories and in original box.

$365 shipped

Paypal F&F, Venmo

I have had a few requests to print something up for the Henderson Trimmer Organizer and here it is.

Gen 2 Henderson Trimmer Organizer $40: This organizer will hold 10 of the dead stop bolts across the top. 8 of the Gen 2 trimmer heads on the middle row and the 4 Forster collets on the bottom. This can be sat atop the bench or can be attached to a wall via two #8 screws.

Gen 3 Henderson Trimmer Organizer $40: This organizer will hold 10 of the dead stop bolts across the top. 8 of the Gen 3 trimmer heads on the middle row and the 4 Forster collets on the bottom. This can be sat atop the bench or can be attached to a wall via two #8 screws.

Gen 2 Henderson Trimmer Organizer Two Row Design $40: This organizer will hold 10 of the dead stop bolts across the top. 4 of the gen 2 trimmer heads on the middle row and the 4 Forster collets on the middle row. This can be sat atop the bench or can be attached to a wall via two #8 screws.

Gen 3 Henderson Trimmer Organizer Two Row Design $40: This organizer will hold 10 of the dead stop bolts across the top. 4 of the gen 3 trimmer heads on the middle row and the 4 Forster collets on the middle row. This can be sat atop the bench or can be attached to a wall via two #8 screws.

Black or red color will be standard, others upon request. If you don't specify I will ship what I have.


other Items Available!!

I have had a few requests for a funnel kit organizer for the 419 gear that can hold everything and be attached to a wall.

Area 419 Funnel Kit Organizer $30: This organizer will hold the calibers they offer plus pistol. this will have two spots for funnels one on each end. The spots for the nozzles are labeled for caliber. This can be sat on the bench or mounted to a wall via two #8 screws.

The standard colors will be black and red, others available upon request. If not specified I will ship what I have. Thanks.


Other Items available!

I see lots of similar offerings.

What would you do and where would you start?

Do some of these use 1 in 8 twists or do some need a faster twist?

I'm planning on a bolt action with the .223 accurate mags and forgiving would be my #1 followed by a decent BC as #2.

Would be shooting to 500 yards.

75 vs 80gr eldm - these seem fairly balanced as far as BC vs weight.

77 vs 80gr smk - seems like the 80 has a big increase in BC compared to the 77 for only 3 grs.

80.5gr fullbore vs 80gr VLD - seems like the fullbore is easy to load due to the tangent ogive?

Thanks in advance!