Looking to buy a cheap Tikka T3X with magnum bolt face. Turning into a budget 6.5 PRC build.

I have a Tikka Tact A1 6.5 Creedmoor. I have been unable to find a replacement bolt. I have been in contact with the Beretta rep for the dealer where I purchased it, and he said Tikka is no longer manufacturing this rifle and he cannot even find a bolt himself. Does anyone have this bolt available or know where to get one? Thanks!

45ACP, Like new condition, not sure if it's even been fired outside of the factory.

Trijicon RMR, 6 factory mags, spare grips, original trigger, factory case, and all the goodies.

$3600 ftf in central MI or plus shipping & insurance via ship my gun.

ETA: I could make use of a decent spotter as partial trade. Maybe a ZCO 527 or a 7-35 ATACR, 10x NL Pures.

Clean Tangent Theta 5-25x56 for $3650.00 shipped and insured.

Purchased just over three years ago from hide member 1963Vette, has lived on sons 6.5 deer rifle ever since. Came with a scratch on the bell that is shown in the photos.

Happy to jump on a facetime call with any potential buyers.

Used like new. Comes with vortex level. Mil $400

I was able to shoot my 7PRC beyond 1K finally and have some questions about getting correct bullet drop.

175 ELDX with MV of 2899 fps @ 8680 ft elevation, 74 F and 12% humidity

Took some initial shots at 806 yards and all first round impacts. Using sig Kilo10k with weather station and AB gave a solution of 4.7 mils

Next target was 1242 yards. AB gave me the solution of 8.7 mils.. Came up short and ultimately needed .5 mils to get on target.

*edit info add: I also plugged all my data into hornady 4DOF and it gave me a correction of 8.9 . Still .3 mils short

I know there are variables in shooting this distance. This is a hunting rifle, not target, so I don't plan to shoot an animal that far, but it is bothersome that my ballistic solution was off. Sig has velocity calibration and 2 target drop calibration. a velocity calibration would obviously be the wrong approach. Would the the measurement difference between 2 targets be the solution that would get my ballistic solution corrected using the Sig BDX software?

Just saw he's calling for all out mass demonstrations against republicans nationwide. Well then, bring it! Texas is waiting.
Hey Sirh, this is your neck of the woods so are you in fear of your life? Oh wait, I forgot, don't you have a cannon

For sale Scalerworks LEAP/09 34” diameter, 1.57” height mount. Like new condition.

Part number SW0910

$300 shipped

Chassis and listed parts only. Optics and action will list separately.

MDT ACC Elite
Purchased all parts new over winter. Everything cerakoted black in one batch. 2 range trips shot from a bench. I do not have original boxes.

Includes:
-Chassis
-Shortened internal full weight (the shortened piece is included)
-3 bridges (one is snubbed flush before Cerakote)
-Baker wings
-Gummies
-Stock weight
-Lightened AT aluminum bag rider (miner wear on bottom from bench see pics)
-5x grip
-All original hardware (thumb screws and such have been swapped for stainless sets)
-Magwell tapped for bag stop before Cerakote
-Aluminum bag stop (nothing fancy)
-No rise cheek piece (delrin nothing fancy)

It’s complete and a little custom. Please ask questions as req’d.
1600 shipped. Located in SoCal.

Barrett MRAD Proof research 6.5 Creedmoor carbon fiber barrel.

24” length
Part number 119464

Around 600 rounds fired (high estimate)
Good condition overall
Currently has a Barrett muzzle brake / suppressor adapter installed on it

$1100 ShippedView attachment 8675350

$1250
Atacs dip

So tonight tried to order pizza, WTF.

Tried Dominoes and Pizza Hut both.

Even though the phone numbers looked local they both sent me to GOAT FUCKER CALL CENTERS.
I don't intend any of my earnings going to FUCKERS OF GOAT.

I have one small local shop but after hours and no delivery.

Is there no national chain not ran by FUCKERS OF GOAT?

lost track of which brass was shot in which rifle over the years and only have 1 6.5c anymore. Decided to start over with new Lapua brass

It’s all LRP

The hornady brass is mostly 2x fired with some 1x

The prime is either 2 or 3x fired, not sure. It came with a barrel I bought years ago. Unprocessed.145pc

260 pc hornady fully processed, ready to load, not primed.

120 pc hornady fully processed, ready to load, primed with CCI 200.

$150 shipped for all of it.

Just signed up for my first PRS event. Gravestone in January. Wish me luck and send a prayer LOL. Words of encouragement are welcome.

I have 190 Nosler premium 300 blackout brass.
And 100 Starline 300 blackout brass.
All new and unused.
$200 shipped TYD.

Well, I'd like to start a thread for people to post in-stock powder when they find it. It only works if people keep participating and everyone stays on topic. The last general reloading in-stock thread died, so I figured I'd start one for powder ONLY. Primers are typically out-of-stock within seconds, and projos are becoming easier to find.

Hey guys,

I’m toying with the idea of selling my SRS A2. I just don’t use the multi caliber system like I thought I would so I’m considering offloading this and getting into a dedicated 6.5 for my general plinking.

Here’s what the package includes: DT SRS A2 chassis with both covert and regular hand guards, parts kit, DT action screw torque wrench, DT general maintenance torque with bits, 26” 6.5 conversion kit (~1.1k rounds on the barrel), 26” 338LM conversion kit (20 rounds on the barrel).

This thing shoots lights out and is in great condition. I’ve just got the bug again.

Looking to get 6k for everything. I’d throw in the gen 1 razor and rings for another 1.2k. Suppressor not included.

Would consider trades + cash. I’d like to get into an AI 6.5CM of some sort. Might consider other trades, let me know what you’ve got.

This is the Moa version .
Mounted and shot once on a 22 rimfire. Box, paperwork , sunshade. $625. Shipped
Rings and level not included.
Check or money order .

Father was diagnosed with High grade large cell Neuro endocrine carcinoma metastasized to the liver. This seems to be a less common type and information is a bit more scarce. Any insight into treatments, outlook, and possible interaction from the vaccine that he took all 7 boosters () for? Thanks in advance.

I've had the Leica Geovid Pro AB+ here since December and have been using it pretty exclusively since then.
I suspect, it will remain my primary binocular at least for this year and quite possibly beyond that.
I finally have a wrap-up video up on Youtube:
Login to view embedded media and I discussed it in a few livestreams prior to that.
I have not yet had a chance to use it for hunting, but I have used it for a good amount of scouting. I had an aoudad tag for late February, but my dayjob went berserk, so I had to pass on it.
The cliff's notes version is that I am quite impressed with it. Optically, I think it is the best LRF bino on the market today overall, although it is quite close between Leica, Swaro and Zeiss.
AB integration in the Leica is a nice touch, since it works with everything else in the AB ecosystem. I use it with AB's Quantum app quite seamlessly. It also connected to my Kestrel without any issues.
They way they've got data coming out is more hunting oriented, I think. Competition guys would probably lean toward a busier snapshot view. I am sort of ambivalent in this case. For the way, I use them, it does not make any practical difference.
My only real complaint is that I would have probably preferred a 50mm and if Leica really wants to go after the competition crowd, they should really consider a 12x50 version of the Perger prism LRF binocular design. Still, as is it has worked very nicely for me through some impressively rough treatment and of all of the LRF binoculars I have tried, this is definitely the one that produces the least amount of eye fatigue. I can use it for a substantial amount of time through the day without any issues.

ILya

NIGHTFORCE 1.125" Low 34MM ULTRALITE 6 BOLT RING SET #A210 (Like New)


Only $140 Shipped & Insured.

Reduced to Only $120 Shipped.

Elevate your shooting precision with our Pre-made Dope Card Stickers, meticulously designed to fit your 3x5 armboard size. These stickers allow for dope adjustments in 25-yard increments from 175 to 1000 yards and feature two wind columns to account for varying conditions. Simply fill out your dope card and adhere it to a 3x5 note card for your armboard in a convenient kraft style, or opt for the rifle stock sticker in vinyl type, with Sharpie as the recommended method for smooth application. Engineered to support Crazy Crow Gunworks’ commitment to precision in hand-built rifles, these dope card stickers ensure you stay accurate and ready in any scenario.

WTS: LNIB: Armasight Sidekick 640 with the PVS14 pano bridge!

Comes with the battery extender, two CR123s, a USB-C cord, latest firmware, spare rechargeable battery, case, original box, and quick start sheet. (Basically, everything that it came with and a pano bridge and rechargeable battery.)

$2500.00

I took pictures as best as I could, but I’m not good at taking pictures through the unit.

The visual quality of the image is much better than these pictures.

Firmware is included so you know the unit is up-to-date. Pictures through the unit or so that you know it works. It’s got a little less than an hour on it. Selling to fund a very expensive scope.



PP FF or Zelle

I will not reach out to you! Be aware of scammers! Please DM me on the hide if you have an interest!!

FS NIB Vortex Viper HD3000 Laser Rangefinder.

Box opened for pictures

$250 Shipped CONUS