All,

Have been working through what to do with my Nightforce NX8 1-8 in FDE.

Want to trade for a high-end AR10 complete upper. Wilson, LaRue, Seekins, LMT, etc. No Aero or PSA.

Prefer 18 inch .308 or 18/22 inch 6.5 CM.

Photos below. Will include NF ultralight cantilever mount in FDE.

@EddieNFL pointed out quite correctly that The Bear Pit is severely lacking in information about bears.

So this thread is for posting facts about bears. Stories about bears. Pictures of bears and other bear-like subjects.


In fact, bears can swim.

Sirhr

This is for two AFGs (one appears to be unused and in the box) and a BCM handstop. $30 for all of it, shipped. CONUS ONLY.

sig 10K gen 2s. $2100 used them this past weekend at a hunter one match, fastest response shoot me a text 720346twothree33 I’ll text more pictures if you want them.

Trying to find exterior weights for my enclosed forend. I tried my grayopps but it didn’t sit flush due to the forend being round at the bottom. Does anybody know what weight would fit? I already have the internal weights.

WTS: Vudoo metal 10rd mag, in pristine shape.

Price is 145, shipped to your door.

Acceptable payment methods are PPFF, Venmo and CashApp, all of them discrete, with no comments whatsoever.

If you have any questions DM me please.

B14 HMR 22" 6.5 Creedmoor

Triggertech special trigger

Short AI AT-X chassis with mid bridge.

AI Action rail for 20moa rails on the forend

NO OPTIC, MUZZLE DEVICE, BIPOD, OR SUPPRESSOR INCLUDED

$2,000 shipped.

Rifle shoots half MOA with 147 ELDM. Confirmed it at 900M with a 4" group.

Group from 100m

.5moa 2690fps 8SD 147 ELDM I also hadn't shot a bolt gun in 7 months so I could have prolly kept it tighter.

The Lenzi Large Cartridge Press will load any and all cartridges up to and including 50BMG.

This massive, beautifully machined and finished press features a stainless steel threaded insert for 7/8-14 dies, bronze ram bushing, removable primer catcher, and mounting plate for permanently mounting to a bench top.

Will also accept 1-1/4 dies with removal of stainless insert.

$750.00 PLUS fright

Edit: To be clear, I expected to see zero shift between barrels, just trying to determine what would be considered excessive.

I just started using an AXSR after getting set up with one with several barrels of different calibers. Had a question after my first range trip and thought I'd post this since I don't have any experience with this platform and according to most threads I've found this doesn't seem like the norm.

The gun came with the .300 Norma barrel and I also got a 20" .308 AI barrel, A 27" .338 Lapua AI barrel and a 24" Stainless Proof 6.5 Creedmoor barrel.
What is considered a typical zero shift when swapping between calibers or is there even a typical outcome?
I zeroed the gun with the .308 barrel (175 FGMM) and when I switched to the .300 Norma barrel (215 Berger OTM ammo) it was less than .2 mil off the .308 zero which is fantastic.

When I switched to the AI .338 Lapua barrel (Hornady 285 ELDM) it was 9.5” low and 4.5” left. Would this be considered within acceptable limits or does this sound unusual for this rifle?
I actually thought I did something wrong installing the .338 barrel so I loosened the locking bolt and barrel and re tightened everything and the shots went back into the same group. I understand not to expect it to hold the same zero between barrels and calibers, just wondering if this is typical.

ALL SOLD

2 x Aero Precision Barrel nuts with wrench - $50 40 shipped each
2 x Aero Precision Solus Trigger Hanger kits - $25 15 shipped each

New/never used

Great condition PRS2 in the beautiful Americana letters with high gloss. Has the mini chassis and a full length SRS Arca rail. Barrel channel supports a M40 contour. Only reason for selling is my hands are a little small for the trigger reach and need a chassis that accommodates my comp contour barrel. May regret this one, it’s a beauty! Stock only. Not the complete rifle as the picture shows.

SOLD

I subscribed to Paramount + to watch Taylor Sheridan's Landman and am not dissapointed.
I binge watched Episodes 1-5 until I got caught up and just watched 6.

I was dissapointed Tommy and his thumpers didn't completely wreck 'Manny' and the other rat on the crew involved in his son's beating. I was hoping those pipe hitting n****** would go medieval on their asses with a plier and blowtorch.

I hope they do better when they find the others involved.

Had this in the parts bin and won’t be using it. This pistol grip kit is for a folding AT stock (may fit AW?) and comes with all necessary hardware except for the two screws to attach the grip. I cannot find them. Those will need to be sourced separately. Comes as shown.

Price: FREE, just pay shipping cost (~$7 - $10)

ACC Elite chassis for sale internal weights, rear weight, 2 covers, and dampers. Everything in the photo besides wings.

1500 shipped obo

I am looking to sell my brand new (only out for pictures) 7-35x Tangent Theta with JTAC reticle. It comes with everything it originally did.

$5800 shipped

SOLD

One of a kind - Custom Staccato XC for sale.

• Custom gunsmithing for that taran tactical pit viper look.
• Custom tuxedo brushed stainless finish.
• Custom machined guiderod bushing
• Custom machined guiderod
• Phoenix trinity - Aluminum grip
• Fusion firearms - Stainless magwell
• Atlas flat trigger
• Trigger job - 2lb pull
• Trijicon SRO 5 moa
• Surefire 300
• Original case
• 2 - 20 rnd magazines (factory)
• 1 - 17 rnd magazine (factory)

$old on another firearm site

All prices include shipping. Payment via Venmo, Paypal (FF preferred or cover fees to use G&S)

MDT Baker wings (mounted, used a few times) - $150 - Sold

Second set of baker wings, not pictured (used for approx 1yr, still in great shape) - $125 Sold

Vudoo Polymer magazines with JKL extensions - $45 each Both Sold

ADM Recon 34mm 1.70 height 0moa cantilever mount (mocked up with a scope) - $200

Up for sale is a brand new Athlon Midas Tac HD 5–25X56. This one has the APRS3 FFP mil reticle. Scope has a 34mm tube. Box opened to inspect but never used or mounted.

$400 shipped PPFF, Venmo, Cash app. Or usps MO ok too.

Lots of trades considered :

Trijicon ACOG. Mag and color doesn’t matter but something caliber 5.56 with a crosshair or horseshoe reticle. Salt or dimmer tritium are fine as long as glass is perfect and it works. $ added my end depending on model and condition

Quality large size rifle drag bag. Tac ops, AIM field sports etc . Color doesn’t matter

PA GLX 2x OR SLX 3 micro prism .308/556 raptor reticle

Aimpoint M2/M3 or Pro

A.R.M.S 16a aimpoint carry handle mount

WML flashlight like cloud defensive, surefire etc

Lapua 6mm BR new brass

Sealed containers of Varget or N150 if can ship

M193 55 grain ammo. IMI, PMC , Win etc

Small compact pistol in .380, 9mm, or .40

…Outside?

Local coffee shop and several of us old guys have a hard time hearing each other at our table.

Some tourist comes in and starts yakking on their phone in their outside voice at a nearby table.

They get the War Chief treatment. Full blast. Works every time .

Login to view embedded media

My Native Brothers

I have a used AIAT. I was attempting to change the barrel and it won’t come loose. The AT has the quick change barrel. I loosened the bolt a couple turns. No go. I put in my barrel vise. No go. Any advise?

Thank you.

-Al

I have a like new MUB MOD DOS is OG Green Anodizing.

I JUST received the two True North Raven MD Spacers after a pretty extended wait... So they are brand new, just installed. I have two Area 419 Arcalock Clamps attached to those ( I have all locking teeth included but removed from the clamps).

I would like to sell all together, but would part out the clamps or TNR MD Spacers individually, as pairs (Both TNR spacers, Both Arcalocks, or all four etc.... This is just to save me the headache of shipping costs...)

Total cost here invested:
MUB MOD DOS: $185
TNR MD Spacers: $100
Arcalock Clamps from 419: $150ish

$360 for everything - shipped CONUS...Paypal FF or Venmo preferred, or GS just cover fees.

If Separating: shipped
MUB MOD DOS (like new) $170
TNR MD Spacers (Like new in bag) $95 for both
Arcalock Clamps (lightly used) $110 for both

I have a used Leupold MK6 3-18 for sale. I got this a while back and have since sold all of my military clone projects so this needs to go. This is a MRAD adjustment H59 FFP reticle. Glass and tube look good. It’s got a few small marks on the top turret from safe rash. I do not have the original box. I am asking 1400.00 shipped. Venmo, usps money order or personal check. Check will clear before I ship it.

Trade offers are welcome.

PM me with any questions.

Hello All,
I have an FA762K and no muzzle devices. Looking to buy a few of them, dont care if flash hider vs brake. Thanks!

Manners LRH - Short action - Right hand
-Elite black carbon
-High Gloss Clear
-Mini Chassis (accepts S/A M5 Bottom metal)
-Left side flush cups
- 4" pic rail
-3.5" arca or full length (properly tapped for both by manners)
-Perfect condition front to back
-Barrel channel cut to fit 1.250 a straight barrel

Asking SOLD - No Trades