Up for sale is 3, 308 aics magazines.
The metal magazine do have a binder plate.

10rd - sold
12rd - sold
10rd plastic $30
(The plastic magazine, I had to shave down the side ribs to fit into Xlr chassis.)

PM if interested
No trades and will not ship to any rural area.

Nightforce ATACR 1-8 FDE with dmx reticle. Zero Gravity 1.54 mount. $2450 for scope and mount. Can sell scope and mount separate. No trades at this time.

M-lok hardware

$75 shipped

The jokes just write themselves!!!

Sirhr

Once fired, brand new. Had plans to reload for it and lost interest in it. 20+shipping

Hey guys, I'm going to buy a scope mount for my Arken ep5. It's going on AR-10 if it matters. So this is a $500 scope, maybe Great value but not actually that much money. Would that change what scope amount you would put on it?

Would you put a $300 scope mount on a $500 scope? Of course you want a good quality scope mount no matter what, but how much would you spend?

I was looking at the Midwest industries Quick release mount. Last I looked it was around 150.

Chassis and listed parts only. Optics and action will list separately.

MDT ACC Elite 700 SA
Purchased all parts new over winter. Everything cerakoted black in one batch. 2 range trips shot from a bench. I do not have original boxes.

Includes:
-Chassis
-Shortened internal full weight (the shortened piece is included)
-3 bridges (one is snubbed flush before Cerakote)
-Baker wings
-Gummies
-Stock weight
-Lightened AT aluminum bag rider (miner wear on bottom from bench see pics)
-5x grip
-All original hardware (thumb screws and such have been swapped for stainless sets)
-Magwell tapped for bag stop before Cerakote
-Aluminum bag stop (nothing fancy)
-No rise cheek piece (delrin nothing fancy)

It’s complete and a little custom. Please ask questions as req’d.
$1375 shipped lower 48. Located in SoCal.

Arken ep5 5-25x56, ffp, mrad. Sunshade included.


$425


Rings and caps not included.

Scope is SPF on another forum . PM me with interest if buyer backs out .

I know the McMillian Stock and a Standard 700 Police Stocks are close. My question, does anyone know if the 40A1 bottom metal will fit in a 700 Police stock? Or should I stop being a cheap bastard and just buy the McMillian?

Thanks guys

Razor Gen II 4.5-27 MRAD with H59 reticle. Shot a few matches with it. Glass is in good condition. Has some small cosmetic dings on the tube (check pics).

Comes with sunshade, lens caps, mount, throw lever.

$1,400 shipped TYD.

I have a Primary Arms PLxC 1-8 FFP ACSS Raptor M8 Yards if FDE. Scope is in great condition and has only been to the range a few times.
$900 shipped
No trades please

I have 7 factory SIG P320 mags to sell. These are like new with two being 21rd and five being 17rd. Asking $150 shipped for the lot. Let me know if you have any questions. Thanks

Manners t4a with mini chassis for 700 SA. Stock has a mtu barrel channel and also has an area 419 arca rail with barricade stop installed. Asking ***sold*** shipped, bipod not included. venmo, zelle

Great action for the money as most of us know. I'm selling only because I have another one and just bought a impact. This one has maybe 500 rounds on it. 308 bolt face. Asking $725 shipped to your FFL. Pp ff, venmo, zelle.

Got a spare brand new A419 5/8x24 suppressor adapter: https://www.area419.com/product/hellfire_suppressor_mount/

This is for mounting a 5/8x24 direct thread can to your A419 universal adapter, this is NOT the universal adapter.

$70 shipped. Will get pics upon request but it’s brand new like from the site. Comes with spare O ring.

Matchmaster Seating Dies

$old .308 Winchester Seater only (neck sizer not included)
$old 6.5 Creedmoor - Seater only
$old .223 Remington - Seater only, used <50rds
$old 6.5x47 Lapua - Seater & FL/Neck sizer (ball expander also included, not pictured)

All in good condition with black RCBS MM plastic die box. Great shape, but sitting unused. Prices are shipped CONUS via USPS Flat Rate. Take $10 off per additional die purchased (e.g. 3 sets = $20 off total price).

PP F&F, Venmo, Zelle. No offers, no trades. Please PM with questions.

So, I bought a set of Triebel 6.5CM dies from someone on here a couple of weeks ago, they were selling three different Triebel die sets. I knew they were German made and checked out the US distributor, Creedmoor Sports, before buying them. They still had them on their website but I didn't realise they were no longer the only US distributor for Triebel and would not be restocking any of the Triebel items once sold out. Pretty frustrating but I'm an adult and should have done more research I guess. I also read several reviews before buying them and like most German made stuff they had great reviews.

So, does anyone familiar with Triebel know how to get any items for the Triebel dies? I don't think the seating stem I have will work with the Berger bullets I plan to use reloading so the seating die is pretty much worthless at this time. I am new to reloading so my knowledge is limited. Thanks

Whats everyone using for a doall bipod?

Obviously, lightweight and sturdy enough to shoot accurately?

Not sure it matters but will be using a arca mount, and rifles would be a seekins element, seekins slam, would use in mountains hunting, from a tree stand, and bench when shooting 100-300

22" Carbon Six barrel prefit chambered in 7 SAW II (.150 throat). Spun up for a Terminus Zeus QC or Curtis Valor/Vector QC. 200rds through it and it's a shooter. Only selling to free up some other funds. $500 shipped. Open to trades- 6, 6.5, 7mm blanks, Impact barrels, 144 hybrids, 180 hybrids, 162 eldms... something along those lines

Chassis is the newest version of the XLR envy chassis, with R lock on the bottom arca rail, and adjustable mag catch. Has full internal and external weight kit included. Does have one of my 3D printed bag riders on it too.

Full disclosure, I don’t remember how but I ended up with a grey TR-2 buttstock on this instead of a color matched black one. If that’s a deal breaker I can swap one of my black ones onto this chassis for you.

Asking for $925 shipped for the envy chassis.

Lightly used set of Redding competition bushing dies for 300 Win Mag. Comes with all 3 dies and 2 neck bushings

$210.00 shipped

Make an offer…need to move this!! For those that have questions this is NOT a CLONE this is the REAL deal and was built for and used by a Navy Seal and DARPA contractor in the early 1990’s (this rifle has been out of the country and “used in anger” I can provide more details if requested.

Here’s the details:
- Full blueprinted/trued Remington 700 Long Action by a smith named Monte Kyser.
- bolt handle has been reinforced
- M16 extractor
- Obermeyer 5R 1:10 twist .308 barrel 26” This is the rifles second barrel and only has 96 documented rounds on it.
.900 at the muzzle straight taper muzzle threaded recently 5/8-24
- Chamber is 300 Win Mag A191 specification (verified by casting the chamber)
- scope rail is 20MOA steel made by D.D. Ross and uses #10 screws, and features a machined recoil lug
- bottom metal is T2 steel made by D.D. Ross mag box is 3.700”
- stock is a fully beaded McMillan A3
- Leupold MK4 30mm scope (custom fixed 16 power) thin wire mil dot (football) reticle
- Rings are Max 50 steel rings
- Trigger is Timney and set at a very crisp 2lbs
- All metal parts coated in Roguard (think cerakote but from the 1990’s)

Rifle comes with:
- Turner 1 1/4” sling
- Pelican 1750 case
- approx. 15 fired cases
- load data
- 8 loaded rounds 190gr moly coated Berger
- 55 moly coated Berger bullets
- Mil dot holdover data (old school stuff)
$3250.00shipped OBO

Please ask any questions you want.

Savage 110 tactical 6.5 prc, Weaver Kaspa mil dot scope, gun is brand new, I've never fired, bought it at Cabela’s back in January. The barreled action is cerakoted magpul FDE, the stock is Mil Spec OD green, will ship with/in the original box. $600shipped.

Re-posting this one, thought I was going to use it on another rifle but going another direction.

Tango Fire 4000 been used at 1 match and a couple range sessions. Works just as it should.

$1200 Shipped.
Trades:
Bix n Andy single stage
Kestrel 5700 elite with AB

Berger Bullets 30 Cal 230 grain Hybrid OTM Tactical - 5 x 100 box - Same Lot - $249.95 Shipped


Feel free to message me with any questions you may have. PayPal FF, Venmo, CashApp, or Zelle.