Filter

Accessories XLR Envy Chassis with weight kit - R700 SA. *price drop*

Chassis is the newest version of the XLR envy chassis, with R lock on the bottom arca rail, and adjustable mag catch. Has full internal and external weight kit included. Does have one of my 3D printed bag riders on it too.

Full disclosure, I don’t remember how but I ended up with a grey TR-2 buttstock on this instead of a color matched black one. If that’s a deal breaker I can swap one of my black ones onto this chassis for you.

Asking for $925 shipped for the envy chassis.

IMG_9370.jpeg
IMG_9369.jpeg

SOLD M24 style 300 Win Mag sniper rifle

Make an offer…need to move this!! For those that have questions this is NOT a CLONE this is the REAL deal and was built for and used by a Navy Seal and DARPA contractor in the early 1990’s (this rifle has been out of the country and “used in anger” I can provide more details if requested.

Here’s the details:
- Full blueprinted/trued Remington 700 Long Action by a smith named Monte Kyser.
- bolt handle has been reinforced
- M16 extractor
- Obermeyer 5R 1:10 twist .308 barrel 26” This is the rifles second barrel and only has 96 documented rounds on it.
.900 at the muzzle straight taper muzzle threaded recently 5/8-24
- Chamber is 300 Win Mag A191 specification (verified by casting the chamber)
- scope rail is 20MOA steel made by D.D. Ross and uses #10 screws, and features a machined recoil lug
- bottom metal is T2 steel made by D.D. Ross mag box is 3.700”
- stock is a fully beaded McMillan A3
- Leupold MK4 30mm scope (custom fixed 16 power) thin wire mil dot (football) reticle
- Rings are Max 50 steel rings
- Trigger is Timney and set at a very crisp 2lbs
- All metal parts coated in Roguard (think cerakote but from the 1990’s)

Rifle comes with:
- Turner 1 1/4” sling
- Pelican 1750 case
- approx. 15 fired cases
- load data
- 8 loaded rounds 190gr moly coated Berger
- 55 moly coated Berger bullets
- Mil dot holdover data (old school stuff)
$3250.00shipped OBO

Please ask any questions you want.

Attachments

  • IMG_0335.jpeg
    IMG_0335.jpeg
    945.5 KB · Views: 1,023
  • IMG_0336.jpeg
    IMG_0336.jpeg
    943.7 KB · Views: 962
  • IMG_0337.jpeg
    IMG_0337.jpeg
    371.8 KB · Views: 736
  • IMG_0338.jpeg
    IMG_0338.jpeg
    492.7 KB · Views: 690
  • IMG_0339.jpeg
    IMG_0339.jpeg
    455.9 KB · Views: 667
  • IMG_0340.jpeg
    IMG_0340.jpeg
    460 KB · Views: 628
  • IMG_0341.jpeg
    IMG_0341.jpeg
    453.4 KB · Views: 592
  • IMG_0342.jpeg
    IMG_0342.jpeg
    348.4 KB · Views: 578
  • IMG_0343.jpeg
    IMG_0343.jpeg
    348.4 KB · Views: 555
  • IMG_0344.jpeg
    IMG_0344.jpeg
    464.6 KB · Views: 574
  • IMG_0345.jpeg
    IMG_0345.jpeg
    486.9 KB · Views: 559
  • IMG_0346.jpeg
    IMG_0346.jpeg
    464 KB · Views: 556
  • IMG_0347.jpeg
    IMG_0347.jpeg
    520.1 KB · Views: 524
  • IMG_0349.jpeg
    IMG_0349.jpeg
    311.5 KB · Views: 958

Accessories Proof research 18” 224 Valkyrie barrel

I have an un-used/new 18” 224 Valkyrie 1:7 twist barrel that comes with their gas system the threads on the barrel. It has an adjustable gas block, gas tube, and break. Muzzle end of the carbon fiber is at .750”. Muzzle threads are 1/2-28 standard. The threads on under the break have a taper mount but it can fit multiple muzzle devices such as griffin dual lock surpressor mounts. I am looking for $550 shipped in conus with extra insurance on buyer’s cost/option. I accept PayPal ff or usps money orders.

Attachments

  • IMG_2699.jpeg
    IMG_2699.jpeg
    309.3 KB · Views: 127
  • IMG_2698.jpeg
    IMG_2698.jpeg
    347.4 KB · Views: 119
  • IMG_2697.jpeg
    IMG_2697.jpeg
    433.7 KB · Views: 115
  • IMG_2696.jpeg
    IMG_2696.jpeg
    474.7 KB · Views: 115
  • IMG_2695.jpeg
    IMG_2695.jpeg
    421.8 KB · Views: 112
  • IMG_2694.jpeg
    IMG_2694.jpeg
    157 KB · Views: 122

Firearms Unfired LWRC M6 IC Di 16” 5.56 Multicam cerkoted

I am down sizing some of my ARs; have an unfired LWRC Di with the ambi lower and spiral fluted 16” barrel. It was one of the limited run factory Multicam cerakoted rifles (not black multicam but standard). It will came as factory standard not with items mounted (scope, light etc.) and with the black buttock shown not the Bcm. The trigger will be the standard not the swapped 2-stage as well as standard Lwrc charging handle not the Geiselle. I am looking for $1700 shipped from my Ffl to yours. I accept PayPal ff.

Attachments

  • IMG_2734.jpeg
    IMG_2734.jpeg
    1.4 MB · Views: 299
  • IMG_2732.jpeg
    IMG_2732.jpeg
    1.2 MB · Views: 243
  • IMG_2735.jpeg
    4.8 MB · Views: 21
  • IMG_2736.jpeg
    IMG_2736.jpeg
    2 MB · Views: 293
  • IMG_2737.jpeg
    6.1 MB · Views: 22
  • IMG_2733.jpeg
    IMG_2733.jpeg
    1 MB · Views: 297

Amateur OSINTer posting potential targets in Yemen , US military bombs them

Amateur open source inteligence dupes buy satellite photos of Yemen and then insinuate they found xyz ,missile site ,underground bunker etc

this one Found a quarry, claimed its a secret base , US military bombed some inocent folks homes , more likely than not based on that , then dupe says sorry donates couple of bucks and its back to idiots being idiots.

Anyone that has followed US bombing in Yemen sees that there is massive lack of actionable inteligence and its back to bombing weddings funerals, tribal gatherings,migrant detenction centers etc.... some civilian infrastructure and now some random peoples houses because someone posted it on twatter.

Login to view embedded media
Gpzrmm8WAAA3zET


GpzrnLvWoAIimwv

Accessories KGM Tapered Muzzle Device 1/2x28 5.56

Brand New in Package $80 Shipped Each.

This muzzle device will allow the end user to utilize an R30T or R338 suppressor on weapons that have 1/2×28 muzzle threads. Heat-treated Chromoly Steel with OXyN gas nitride finish. Bored to accept up to .338 projectiles.

Fits R30T, R65T, R338
IMG_8144.jpeg


This muzzle device will allow the end user to utilize an R30T or R338 suppressor on weapons that have 1/2×28 muzzle threads. Heat-treated Chromoly Steel with OXyN gas nitride finish. Bored to accept up to .338 projectiles.

Fits R30T, R65T, R338
  • Like
Reactions: Estes640

SOLD Zeiss S3 4-25x

Selling a Zeiss S3 4-25x Mils.

Excellent condition. Used for a couple of 22 matches. Works great for that since it will parallax so low and has an insane amount of internal adjustment.

One small mark on the body near the turret and a ding on the rear ring. Comes with butler Creek caps and with the Zeiss lens covers and original box and manual.

Seekins rings with diving board

1600 shipped with rings and diving board.

1500 scope only.

No trades.

Venmo gift or zelle. No PayPal.

If you want it, do not post on this thread or scammers will be all over your inbox. You message me first, and don't reply to anyone else that messages you about it.

Attachments

  • 20250331_190912.jpg
    20250331_190912.jpg
    1.6 MB · Views: 331
  • 20250331_190921.jpg
    20250331_190921.jpg
    1.8 MB · Views: 320
  • 20250331_190925.jpg
    20250331_190925.jpg
    1.9 MB · Views: 283
  • 20250331_191118.jpg
    20250331_191118.jpg
    1.3 MB · Views: 270
  • 20250331_191221.jpg
    20250331_191221.jpg
    1.9 MB · Views: 249
  • 20250331_191228.jpg
    20250331_191228.jpg
    1.9 MB · Views: 233
  • 20250331_191504.jpg
    20250331_191504.jpg
    741 KB · Views: 316
  • Like
Reactions: Sako man

Not the Onion - Saving Private Ryan dethroned as greatest war film ever

I swear, this is great. I never knew!
I mean, who knew postal duty in England during WWII could be so bad?