I am new to Precision shooting so take it easy.

I am thinking about acquiring a Sig Kilo 3K handheld LRF and a Samsung Table to install the Ballistic software of choice.

My question is: can the software get the weather data from the LRF?

I know most people just use their smart phone, but I don't wish to use a smart phone.

The Kilo 3K advertises that it has the data sensor to do real time calculations.

I understand that most people use a Kestral for getting their weather data, but I am not sure that I am at that point to spend that kind of money.

By starting with just a LRF and a tablet, it would get me started and if need I can get a Kestral later if needed.

HOLDS 25 BULLET PROFILES AND 8 BALLISTIC GROUPS - Environmental sensors provide real-time calculations for ballistics; applied Ballistics Ultralite has a complete bullet database with 25 profiles and 8 onboard groups, ensuring you get accurate data

This is very interesting.
Login to view embedded media

Just got this, but decided on a different mount.

$395 shipped Conus

Payment via discreet paypal

1-Nightforce Ultramount (blk, 34mm, 0 moa)

1-Rap-I

1- Koeng group Acro mount for rap-I.

All in excellent condition.

The atacr is not for sale (yet)

Not interested in separating

Pm me before posting to avoid scams. Thanks

Hey Everyone. I just ordered a Solus Obsidian action on discount from Midway and Im waiting on an order from NSS for a Criterion small shank Savage 110 barrel nut pre-fit chambered in 308 Win (I also ordered a squared savage barrel nut/wrench from NSS along with headspace gauges).

Note I dont have a barrel vice and criterion doesn’t recommend using one when installing a barrel nut pre-fit. They recommend the NSS action vice. I normally would go that route but when I was ordering the barrel James at NSS had mentioned his standard NSS action wrench won’t fit the solus action due to integrated pic rail so I need to use the internal solace action wrench to secure the action when mounting the barrel/torquing the nut. This makes sense, but the question I’m left with is how do I actually incorporate the internal action wrench into the install process?

I ask b/c according to an Aero rep's post on reddit, if installing a barrel with a barrel nut, simply use the Solus Vice jaws, if installing a shouldered prefit, use the internal action wrench.




When searching online I found this savage prefit barrel install tutorial video by Criterion which is great but they are able to use the NSS action wrench since their install is for a savage action not a solus action with integrated pic rail. The steps they follow are different compared to a Solus action that can't use the NSS action wrench.

Here are the 2 options I'm considering (macro level steps):

1. (Aero rep's method) Clamp the action in a vice (using the Solus Vice jaws), set headspace, torque the barrel nut to spec, check headspace again with go/no-go
2. Or do I incorporate the internal action wrench so that the action doesn’t get deformed when torqueing the barrel nut even though the action is secured in the vice jaw inserts? For example:
   1. Clamp action in vice with Solus Vice jaws
   2. Set headspace, then hand tighten barrel nut, check headspace again with go/no-go
   3. Unclamp action from vice, clamp the squared end of the solace action wrench into vice then slide action onto the other side of wrench fully engaging with the lugs
   4. Torque the barrel nut to spec, check headspace again with go/no-go

Or am I way off and you suggest completely different steps to follow?

This is my first bolt action build so I'm used to following the steps for installing AR-15 barrels (that use M4 barrel extensions, barrel nuts, etc.) that definitely need the upper receiver internally secured (with something like the Midwest Industries Upper Receiver Rod clamped into a vice then slide upper receiver over the rod) before torqueing the barrel nut. In option 2 above I was essentially thinking of using the solace action wrench (after setting the headspace) very similar to how I use the Midwest Industries upper receiver rod when installing AR barrels.

Any help/feedback would be much appreciated, thanks!

like new Leupold VX-5HD 3-15x56 scope. Model number 171390. It has the Duplex reticle with firedot. $1300 buys it

DNA Firearm Systems AR10 Alpha chambered in .243. Less than 50 rounds down the barrel. Top of the line everything and easily the best shooting AR I have fired. Great accuracy and low recoil. Just thinning the herd for a new habit.

DNA matched Alpha receiver set
20" Proof carbon fiber barrel
SLR adjustable titanium gas block
Lancer Systems CF handguard
JP Bolt and BCG
Radian Ambi charging handle
Timney Calvin Elite AR Trigger.
Smoke Composites CF adjustable stock
JP silent capture system
SilencerCo ASR Muzzle Brake
Weight is 7.2LBS

$4200 buys it

Leupold VX-III 6.5-20x50 Target Dot scope.
Scope is in good shape with no issues. These scopes are hard to find so. $1500 buys it

A few things I don’t need. All prices shipped.

Trigger tech diamond skeletonized. Right hand 700. Like new less than 30 rounds. SOLD

* Forster 3-1 trim heads. 25 new, 30 trimmed 100 pieces. $60 each.
* Brakes. $100 each
TBAC 338 3/4-24 brake
Heathen 30 cal 3/4-24
Meraki machine 6.5 5/8-24.
*MPA matrix pro butt pad. $50
* MOA rear rest. $85
* Arc M-Brace Mount.
36mm 32mm high 20 moa $125

600 pieces of brass
300 lapua 10 firing. Lots of life left
300 alpha 3 firing.
Redding type s seater die and l.e wilson bushing sizing die.
350$ shipped

Does anybody have a 'known good' G7 BC for the 175gr .308 SMK?

I get anywhere from .239 to .253 depending on which combination of software/data I use.

The closest "good" data I could find is a .240 G7 BC cited here on the Hide by Mr. Litz for the .308 178gr AMAX (published .495 G1 BC) -- so I'm guessing a good G7 number for the .308 175 SMK will be very close to that?

-Matt

150moa of adjustable elevation. Comes with precision hardcore 30mm low rings.

$350 shipped

Better description, Heritage arms website:

Login to view embedded media

1. MDT short mag metal 7 round (holds 8 no problem. sold
2. MDT short mag 3 round metal $70 sold
3. Accurate 300 WSM metal says ten- holds 8. $50 shipped. sold
All work great just leaving the caliber.
Paypal friend or Venmo

I am wondering what the different results or advantages are when using lighter spring with heavier buffer vs heavy spring and lighter buffer.
18” mid length 6arc. I will be adding a suppressor.

I'm about to pull the trigger and get my first mcmillian stock. I want to use a detachable bottom metal assembly. What are my choices? Who makes a good system? Does mcmillian have there own DBM ?

Hey Guys

Does anybody knows the Maximum Length and Trim to Length for the 300 Norma Magnum Case

Information will be greatly appreciated

Left hand right eject Zermatt TL3 medium action with magnum bolt face and a 20moa rail - $1100 shipped to FFL.

26 inch Proof 6.5 PRC TL3 prefit - 800 rounds fired - $400 shipped.

2 MDT medium action 6.5 prc mags $150 shipped

XLR magnesium element medium action. $450 shipped.

$2000 shipped for all of it.

Any simple tips on removing the ATACR beauty ring? I’ve shot a few of these for years without ever trying the ring. Decided to try one out. Threaded on easy so it’s not cross, but my fingers cannot muster sufficient purchase to take it off.

Lightly used.
Zeiss V4 3-12x44 #20 reticle. 30mm tube size. This model was just released last fall. It has MOA dial elevation turret with a Zero stop. It has a capped windage. Great for a carrying hunting rifle. I put this on my kids rifle and I now have a couple V4 4-16x50's so we have the excact same scope.
Scope in great condition. Original box, papers and scope cover included.

$675 delivered

Lightly used Cal with the RRS pic/arca clamp. Used in a handful of matches. Original feet have a little wear but you can tell it’s very very light.

Always open to offers— I thought this seemed like a reasonable price but I am not in the loop on what these go for.

Price includes shipping.

Venmo or Zelle friend to friend only.

any new products in the pipeline?

or are they shutting down?

I have a brand new in box Signature Series Microtech Makora D/E Tactical Standard. This version is murdered out with no markings on the black blade. Never cut/carried and comes with everything as new. Smooth action with Nickel Boron internals.

Asking $325 shipped OBO

I keep seeing folks post in threads about SD's that getting a low SD in .223/5.56 is challenging, but I havent seen anyone say why that is the case - curious?

Also if low i.e. single digit SD's arent doable in this caliber what is the ideal or goal SD range for you?

Brand new Stuteville Bartlein 6 GT 26” M24 7.5 twist black cerakoted for impact 737.

$815 shipped

PP FF/Venmo

Leica PRS 5-30x56i L-4a reticle. As new, not a scratch on it. Comes in box with everything from Leica.

$1550 shipped

PP FF/Venmo