Before you ask, I have already attempted to contact Trigger Tech twice to ask this question. I've not been able to find a schematic online that shows the answer either. My question refers to the rod that appears to hold the trigger shoe in the housing of a TT trigger. I took my rifle a part yesterday and noticed the small C clip that snaps onto the left side of rod with the notch in it is missing. This is the same rod that would hold the part to convert the trigger into a bottom bolt release as well. The C clip is what keeps the rod from falling out of the trigger. Hope that is explanation enough to know what I'm referring to. I'm needing to know the size of this clip so I can attempt to source one locally. 100% know a Trigger Tech CS rep can tell me, but two phone calls and emails later, I've still not received a response. Any information is appreciated. Thanks

Manson 30 nosler go and no go guages $75

SPF

Looking to sell a Remington 700 LA barreled action. Chambered in 300 PRC. ~100 rds of 225 Hornady ELD-M down the tube. Some paint present from an old rattle can job.

-E prefix action , trued and blueprinted, 8-40
-Brux 26” barrel, 1:9 twist , 5/8-24 with recessed crown, #14 heavy palma

Not included:
-Area 419 20moa base
-Trigger Tech Special 2-stage trigger
-Smith vortex flash hider not included

Rifle built by Precision Rifle and Tool in Mebane, NC.

$1350 $1000 FTF in South Carolina. Willing to ship, buyer covers actual shipping cost.

Open to trades:
-NF optics
-Vortex Razor 1-6
-CZ Shadow 2 , TS 2 or similar
-AI AT/AX barrel, 6.5 creed
-6.5 creed match ammo

Apa fat bastard gen3. No screws, 5/8-24 6.5mm - $100 shipped

I have 8 Wilson Combat 9MM/10RD magazines. These are unpackaged but brand new, never used. Why spend your time at the range loading magazines? Load 'em up at home and spend your range time shooting! All 8 $200.00 ($25/mag). No splitting (I don't want to make this a full-time job running to the Post Office 1 magazine at a time!). I'll cover shipping in CONUS. $200.00 PPFF or Zelle.

Part NO. 500-9

still factory sealed
Case of 2000
Hornady .264 / 6.5 140g. ELDM BULLETS
$635 shipped
Thanks for looking
Cross listed

This is a set of like new Zeiss Victory SF 8x32 binos - phenomenal glass with wide FOV. If you are looking for something more compact/portable than the traditional 10x42's then the Victory SF represent the best glass from Zeiss to date, stunning image. 21.2oz and 465.7' FOV at 1000 yards!

$2500 binos for $1395 to the first "I'll take it". PP FF, Venmo or MO, even check (but wait for clearance)

These were used for testing so have seen little use, they are like new - perfect glass and no major scratches or blems I can see. Selling to fund other projects, might consider trade for other optics or LMT MRP-L stripped uppers, or?

Thank you for your interest. I have them priced individually but will gladly bundle.

Looking for one or two Area 419 mount 36MM 1.54" 0 MOA.

Selling a pair of used Peltor Comtac III electronic ear pro with single comm. Included gel cups and KoffinWurks cable management.

Only “issue” is I had to cut the original headband to helmet mount them. I’ve since taken them off a helmet so the original headband was taped on. Still works and 100% functional. New headbands can be had pretty easily.

$300 shipped. PayPal FF preferred.

Brand new in the box TBAC SR Non-Timed Brake for 223 1/2-28 TP. $OLD shipped via discreet PayPal/Venmo FF/Gift or Zelle.

I have brand new in boxes ( took out for pics only) Leofoto SA-402CX and LH-55LS
$650 shipped.

SOLUS SHORT ACTION, OBSIDIAN - .478 BOLT FACE​

Bolt Face Size Reference
.478 +/- Standard
.540 +/- Magnum

I have two, brand new, decided to go a different route.

This is the .308 bolt face.

$670 shipped. SOLD

NIB Geissele 11.5 super duty upper in ddc. Complete upper from factory with rebcg, ch, and hux flash hider. Asking $1050 shipped, no trades.

For sale is a Schmidt and Bender PMii 6-36. This has the Grid2 reticle, DT35 turrets, and wrapped with a Dangerfield Arms protective camo wrap. It’s mounted in a 20 MOA spuhr mount. $3200 without the mount, $3650 with the mount. Optic is in great shape, no dings or scratches on it.

Hahahahahahahahahahah.

Hey ya cunts just pretend you are cleaning the bathroom to fight climate change .

Seriously a feature length article about grown ass federal employees crying for having to take turns cleaning their bathrooms .

Are there any current options for repairs on the Leupold M3A scopes? I have one that came with a Remington rebuild M24 that needs a new elevation knob and the elevation no longer has its full range of travel. Leupold customer service rep was unsure if they could do anything to it or not.

I have two .875 Jagerwerks EOTECH (or any other picatinny mounted optic) and one Diving Board for sale. I don't even believe Jagerwerks makes these anymore, but I have had all the other options that work with a "diving board" including GBRS and this height to me is more ideal. This one will get your XPS up to 2.25" and your EXPS up to 2.50" (where I like it). It also gives you the ability to remove your board/laser and run only the optic riser. The optic risers are anodized FDE. The diving board is cerakote FDE, performed by Jagerwerks.
Optic riser only-$150
Riser+diving board-$250

I got this today. It's a holster that is more like a chest rig but I found it comfortable to wear a little lower toward the left side of my torso. It's also comfortable, as designed, to be worn close to the chest. It's easy to adjust the straps while wearing it with the pistol enclosed. I give it 6 out of 5 stars.

New ,Never shot outside of factory

308 Jakl
Burris RT6 package(scope,mount,fastfire)

$1600 Shipped!

Locates in the Greenville SC area

Like. New 20 rds down range to sight in and start barrel break in
She is a Laser!
Comes with NF Extreme 20 moa mount
Arca bipod mount
Harris bipod
This is the newest variant with fluted bolt and MB
Target shot at 260 yds

$900 Shipped conus
Can include 60 rds of ELD match,but buy pays shipping on that
Located in the Greenville SC area

Scope and rings NOT included

GA precision crusader with 3 barrels (.260, 6.5 creedmoor and 6.5 SAUM)and 2 bolts (mag and standard). It is a Templar action. McMillan A5 stock (GAP camo) with added adjustable cheek piece with KMW hardware. The rifle is used, (1500 rounds on the .260, 550 on the saum, 500 on the creedmoor). Only wear that I've seen is a little bit on the bolt which is to be expected and some of the fatter portion of two of the barrels where a barrel vice would clamp down on them to swap barrels, purely cosmetic though.
I took this on a trade from here not long ago, haven't shot it so I can't attest to accuracy though I can't imagine that it would shoot anything but excellent with it being a GAP.
This was the original listing: https://www.snipershide.com/shooting/threads/ga-precision-crusader-for-trade-only.7245046/

Asking $3000 shipped to your dealer, feel free to ask any questions you may have. Only selling it because I'm not setup to reload any of these 3 calibers anymore and don't feel to need to do so really.

I'm tired of fighting my gear. I have a CZ 455 with the factory American barrel which I had cut to 16.5". It's fine for hunting, but the balance point is unacceptable for PRS.

I'm thinking about getting the B14R Heavy, but I'm skeptical it's going to balance without external weights.

The other option would be to find a heavy prefit for the 455 (leaning towards Lilja or L3i) and if I like the setup then I'll get the cheapest 457 I can find, then build a competition rig off that action.

Lastly, the nuclear option, is just go Vudoo or RimX. I'm hesitant because I don't want to chase feeding issues and magazine prices are stupid.

Like new. 0 moa. 1.25

175 shipped