Up for grabs is my Seekins SP10-M USASOC clone rifle. Chambered in 6creed with a 22” barrel, adjustable gas system, and cerakoted small parts/barrel to match the rifles original cerakote. Only 300rds down the pipe, and it’s a laser beam, shooting factory ammo around .4moa. The wait time for Seekins is around 14months currently.

$3,750 shipped to your FFL
PayPal F&F, Venmo F&F ONLY

. These hold 50 rounds or 100 rounds.
I will make for other round quantities as well. Made in Walnut or Cherry wood.

Magnetic closure. Each round is totally encapsulated so spent cartridge cases stay put if you flip the box over.
Making for 6mm BR/bra/dasher size rounds, .223, 6mm PPC 6.5 Creedmoor, 6.5x47, 22 Hornet, 30-06, 284 winchester, 300 Winchester Magnum 6x47 and other cartridges .
Made to order, Please allow 2-3 weeks for delivery.
I will Laser engrave your name on the box top and or caliber as well as special logo’s etc.

There $100. For a 50 round box and $165. For a 100 round box Shipped made In Walnut, with caliber and your name Laser etched on box top. Add $5.00 if you have a logo you want on top also. I will need cartridge type and your loaded overall cartridge length.

So trying to decide where to shoot today and wondering does anybody know if the Altus long range is open to the public or members only? I normally shoot at element which is 30 minutes closer to me than Altus but if I can get a day pass then to Altus I will go

One full box of 500 ... still in plastic wrapping .. just not use them for a while..will upload Pic later.

$240 SHIPPED PAYPAL F&F

I was chatting in the super top secret area of the forum, an a topic popped up in my mind. Considering how the past years have gone politically and spiritually. I have decided on one thing I seek out of the next four years. Accountability. If I only have one wish, it’s that. We can all create a laundry list of things that went bad. But to some it up with a remedy or cure. It is that. Accountability. What does the mind bank of the Hide think?

Used on an ATACR for a few months in great condition
$300 shipped and insured
Zelle, cash app, usps mo, cert check

Watch out for this guy. Paid for something and never shipped….

I was bumming around looking at light scopes last night. Most stuff that is pretty small is still 15+ oz. Even my Razor LH 2-10 is 15oz and it sports a 56ft min FOV. I went to check out the SWFA ultra-light. Its a 2.5-10 with a weight of 9.5oz and minimum FOV of 46ft. I can't find them in stock, but I back ordered one since they are sale right now.

I haven't seen ultralight mentioned much around here. I would have preferred they put their mil quad reticle in it, but there is a ballistic reticle option for a little more than the duplex. I am surprised that an ultralight hunting scope with a mil based reticle hasn't even been built, let alone catch on in the hunting world. The SWFA ultra-light would be the prefect example if it had their mil-quad reticle as an option.

For me, and of lot of hunters, we don't need to dial. My hard limit is 600y. I think for a lot of people it is less, and for some very skilled people, it is more. So for me about 3.6 mils gets me to my maximum range on game. Any ole mil based reticle can give me that, and I don't need to carry another 20oz of scope since I don't really need it to track, just hold zero.

Sure would be nice if I could get something like the SWFA ultra-light with a mil based reticle. I think i a lot of people were honest with what they wanted in a hunting scope,{people here dragging 40oz scopes over the mountain} and understood the utility of a simple mil-dot{not people here, Fudd Logic} it could get very popular.{voice of reason scope choice and Fudd logic united}

The Razor LH MOA based reticle is ok, but I jus feel dirty doing things in MOA. Plus try to find one...

This is a used Luth-AR MBA-1 Stock Assembly with a rifle length buffer tube, spring and buffer.

Approximate round count is 500.

Screw that attaches stock to tube is included.

$50 shipped SOLD

Seems GrayOps no longer makes their reloading stand kit. Anyone making something similar to this?
I love the idea of using vertical space to organize.

Used but good condition iron sites

Rears are USMC stamped

Fronts 99051

$210 shipped

Have 849 of the same lot 107gr 6mm SMK’s. $300 shipped

Will trade for 105 hybrids

I have a rather weird question about the barrel of one of my bolt guns. This is an honest .5 to .6 inch rifle starting out. If I load up 100 rounds for a Saturday afternoon at the range, my rifle starts off shooting super tight. By the end of the day its shooting about 1.25 inch groups. Once I clean it, we are right back to .5 to .6 inch groups. What I don't understand is why it looses precision so quickly. My goal is to get through a range day with the nut behind the trigger being the only problem. I'm considering trying Tubbs Final finish but I'm not sure that is the right tool for the job. I know ahead of time that final finish won't work miracles. Any advise is greatly appreciated.

I have a like new, only used 1 time, California Compliant AR-10/6.5 Creedmoor that I’m looking to trade for This rifle is in perfect condition and shoots lights out! There have only been 60 rounds fired through her. I shot the factory Berger 140grn Hybrid Match Ammo and the factory Hornady 147grn ELD-M ammo during testing. The rifle performed best with the Berger Match Ammo and would shoot sub MOA as long as I did my part. It also shot well with the Hornady Match 147grn ELD-M, It consistently shot 1 MOA. The rifle is super smooth and runs fantastic! The JP Bolt Carrie and High Pressure Bolt work very well. At any rate, here are the specs;

1. Aero Precision 6.5CM Upper, 24”, SS, Fluted Bull Barrel, .936 dia at the muzzle, 1-8 Twist, Cerakoted Olive Green
2. Aero Precision M5 Lower

3. JP Bolt Carrier

4. JP .308 High Pressure

5. Radian Trigger at 3.5LBs

6. Radian Raptor Charging Handles
M
7. Geissele Buffer Spring

with

9. Magpul PRS Gen 3 Adjustable Stock OD Green

10. Hogue Modular Rifle Grip OD Green

11. Area 419 12” Arca Rail

12. Juggernaut Tactical Hellfighter System

13. Aero Lower Parts kit

14. (2) 10 round mags Cerakoted OD green and (1) 5 round mag

The rifle was professionally built and cerakoted by Dirty Bird Industries in Bakersfield, Ca. The rifle looks absolutely beautiful in person. Like I said, this rifle is like brand new, functions beautifully and shoots lights out! If you have any questions, or would like to speak with me, send me a PM.

Furthermore, I have 12 Boxes of Berger Match 140grn Hybrid Ammo available for who buys it.

If you want to buy, I’m asking $2450 shipped to your FFL. If you’re truly interested, please make a fair offer. I do or take Zelle, Personal Check or Money Order if you decide to buy.

Scope “NOT” included.

For Sale:

AI AX Dark Earth Package
Includes:
AXSA
RRS Arca Handguard
AI Key Slot Rail
AI Mlok Rail with Arca
$5900 OBO with no barrel

Barrels and Accessories:
AX 308 Barrel $500
AX 6.5 Creedmoor Barrel $700
AXSR 308 Barrel $700
AXSR 300 Norma Mag Barrel $775
Tier 1 ATAC Bipod $375
Tier 1 ELR Bipod $485

I will sell the AX with or without a barrel. If the buyer for the AX wants both AX barrels I will knock off some cost.

Only trades I am looking for:
Wilcox SKEETir/UTM flip to side mounts any color
14.5" Proof steel or CF 6mm Arc AR barrel
26" Proof AXSR CF 7prc Prefit
6mm ARC Hornady TAP Ammo
7PRC ELDM
AXSR 300WM Bolt
Kestrel 0857XAL
Atlas BT47-NC Tall PSR Bipod without mount or on arca slider

Rifle has 500-600 rounds through it. It shoots half inch groups with an omega suppressor and hornady 140eldms loaded with 4350 powder.

1250 plus FFL to FFL.

WTS: Blueprinted Rem 700 SA with 20” Shilen R5 chambered in .260 Ackley and Trigger Tech adjustable, flat shoe, single-stage trigger, and LaRue extended 20 MOA rail.

Spiral fluted barrel and bolt, lightening cut handle, custom knob, and faceted shroud. All nitride finished. Work done by Chad @ Long Rifles Inc.

Comes with Redding Match die set, 400+ Lapua cases (100+ fire-formed) and +/- 100 loaded rds with Hornady 143gr ELD-X if wanted.

Approximately 400 rds through the tube. Gunsmith inspected; no flaws.

$850 shipped & insured.

Cost me over $2k

Selling a gently used Aero Solus short action with trigger tech field trigger, 20" M24 contour .308 barrel, and aero solus action wrench. 190 rounds through it.

Shoots about 1 MOA ish with m118lr.

Priced to move at $850 for the barrelled action, open to offers. Selling as I just don't need another project rifle. Can include a painted KRG bravo chassis.

MDT ACC Premier Gen 1 for a SA R700. Chassis in good condition with normal ARCA rail wear from bipod and matches. Comes with steel bag rider and rear weight.

SOLD

Like the title says,

Manners PRS, High Plains, full weights, 419 arca rail, Sikes Rail and clutch
$1400 shipped

U.S. Optics MR-10 T-PAL Rifle Scope 30mm Tube 1.8-10x 37mm Side Focus 1/10 Mil Adjustments First Focal Illuminated GAP Reticle Matte.

Feel free to message me with any questions you may have. I'm asking $800 OBO, shipped via 2nd Day UPS insured. PayPal FF, Venmo, CashApp, or Zelle. I can meet in the Fort Benning, GA, area.

Let me know if you have a decent price on one

Bushnell LRHS 3-12 x 44.

Hard to find model with better FOV and that wonderful circle of death for great target acquisition.

Great condition, no marks.

$820

Catch and release:

Leupold Mark 5HD
7-35 Tremor 3
FDE
Brand new, removed from box for pictures

$old

Vortex Impact 4000 WMLRF
Custom black beauty
Been outside maybe two times

$old