Selling my like new set of Vortex Fury 5000 AB
Going to a weapon mounted lrf and just run my handheld to shoot prs.
No issues, clear glass, all factory unopened eye piece covers and straps for the chest pack.

May trade for Manners LRH or a Folding chassis SA 700 footprint only
Would consider trading for a Terrapin unit also
Thanks

I have new never used SRO 2.5 moa with Jagerwerks BROS shield
$530 shipped

Brand new NF ATACR 4-16x42 new in the box. Never opened or mounted. Mil-c reticle 2200$ shipped

Gen 2 Ruger American ranch 16” fluted 300blk with vortex viper pst 1-4 mil reticle, vortex rings, adjustable kydex cheek piece, rearden SPB muzzle brake, extended mag release, Harris 6-9” bipod and 10rd pmag. By far the quietest gun I own, only about 100rds through it. $715 shipped to your FFL. Selling as a package, will not separate. NO TRADES.

Tangent TT315P (the 34MM tube)- scope has not been fired, includes box, owners manual, laminated reticle card, kill flash, Tenebraex covers and the TT throw lever ($155). This scope has been lightly mounted but not torqued and has extremely faint finish scratch on lower rear. Gen 2XR reticle. Asking $3600 $3800 Shipped.

Tangent TT525P (5-25x56) – scope has not been fired, does not include box. Includes Tenebraex covers, kills flash. Appears flawless. Gen 3XR reticle. Asking $3,900 $4200 Shipped.

Willing to make some bulk discounts if bought with ammo (listed separately).

I know it's a dumb question - if I want to go to 6.5 creedmoor, and I have a 243 or 308, I can screw in a shouldered 6.5 CM prefit barrel and it should headspace correctly without any problem? In theory at least? As long as it's a 308 bolt face, the bolt and bolt face don't know or care what the barrel is chambered for?

Looking for right hand action, either CDG or Nucleus. 308, PPC, or 223 bolt face

Hi. Long time shooter already. Mostly i shoot airguns because of low power and sound compared to PBs. And i am pretty old member of the AGN forum.

I have learned PCP airguns so well that i feel its part of my life!

I am also having good times with my shotguns and AR!

Will post more in other threads but be sure i will share all my knowledge to anybody who will need it.

Thanks!


Niko

They're upping their game, or maybe they already have been doing this.

I posted PM sent on a FS item, and was contacted almost immediately by sumilily with a shitty cut and paste of the OP photos/image. It was reported immediately.

I hate fucking scammers and crooks.... well and Dems and Socialists too.

***SOLD***
Selling off some components
200 x Lapua Large primer 6.5 Creedmoor brass. I already sold the 3rd box btw - $200

7 x 100pc boxes of Hornady 6.5 140 ELDM’s. - $245 (can split these up)

1 1000pc brick of CCI no. 200 Large rifle primers. - $100

If buying stuff together I can cut a deal!

Selling NX8 4-32 mil-XT reticle in good condition. Has some light ring marks and scratches on aluminum. Lenses are clean.

$SOLD shipped

Have a like new Ruger American Rimfire 17 HMR. Shoots very well, I just don’t use it. Have both cheek risers, two mags, and some Hornady 17 gr V-Max ammo. Also have a Vortex Diamondback 2-7 Rimfire scope in Warne Vapor rings that I’ll add for $100. $350 for the rifle. Located in NW Arkansas, but can discuss shipping. Thanks

If I purchased the barrel w/ pre-fit action of Tikka T3, chassis, stock, grip, and rails at outlier, is the only other piece of the puzzle the receiver and trigger and would the linked receiver/trigger work with an outlier build? Do yall know of any other places that sell tikka t3 actions?

LRC .45 cal smokeless muzzleloader. 27” barrel (I believe they use brux) with their muzzle brake. Grayboe stock, trigger is set at about 2 pounds. 125g (weight) of blackhorn 209 Will push a 300 grain Parker at 2600 fps with great accuracy. I never worked any kind of smokeless load with this. Used arrowhead ignition modules (loads into the bolt). Will come with about 50 Parker 300g black max, 20 primer modules, primer removal tool, carbon funnel, collapsible ramrod, few other goodies. I replaced the stock this year and have not shot it since (prior stock had bedding break out and I had this laying around). It would likely be beneficial to bed the stock. Any further questions please ask. Optic not included.

$2350shipped from my FFL to yours (unless near western Nebraska, then we can meet). This must be transferred to an FFL as it is serialized.

Will trade for thermal devices, clip one, quality 22/6 arc, 22 creedmoor, Coyote style rigs. Will also consider quality AR10s in 6mm creed or similar. Short barrel tikka hunting rifles. Any other trades just ask.

So I ordered a Outlier Barrel for black friday, $180 after tax and shipping, 1.25 full bull 6.5 Creed 1:7 twist. I got it for my Ruger American Predator to rebarrel cause the factory barrel heats up to fast. Well...so far not so good kind of. The factory barrel took some persuasion to get off but that's ok, but the rebarrel is where I could use some advice i guess. I headspaced it and everything fine but after its headspaced and torqued correct there is a Gap between the front of the barrel nut and the end of the barrel where the tenon begins. I contacted Outlier/Arken, same company, and they said the Gap is more cosmetic, which it is, but they also said the Gap does seem a bit to big. They also asked if I headspaced with or without the extractor/ejector installed. I told them I did it both ways and the Gap was about the same only .001 off if any. They have still not answered me back and all Arken/Outlier says is please be patient their Tech department is busy, which could be true. My theory is they chambered it correctly for 6.5 Creed but then cut the barrel and tenon threads for a long action caliber, but I'm just guessin. I guess I'll just wait and see.

I just picked this up a few weeks ago from another seller here on the hide and I'm being assigned to a project at work so I won't be needing it for awhile. AZTEC installed.
I won't have time for shipping so local sale only (won't have time for halfwayto Dallas or San Antonio, etc). Phone conversation to be had with buyer. No trades at all. PayPal F&F preferred. $1250 firm
Pilots included- Creed, BR, Dasher family, 223, and 6GT.

Leica Amplus 2.5-15 Illuminated Riflescope Deals

We just got in these Leica Amplus Illuminated Riflescopes. These have never been mounted and are in same as new condition. Great scopes at great pricing......

Leica Amplus 6 2.5-15x50i - L-4a BDC #50310 reduced from $1,599.00 to only $999.99

Leica Amplus 6 2.5-15x56i - L-4a #50400 reduced from $1,699.00 to only $1,099.99

Leica Amplus 6 2.5-15x56i - L-4a BDC #50410 reduced from $1,699.00 to only $1,099.99

If there is anything you're looking for please give us a call at 516-217-1000. It is always our pleasure to speak with you. Always give a call to discuss options and what would be best for your needs

We appreciate all the orders and support. Please stay well and safe. Have a great day & please follow us on Instagram at gr8fuldoug_

Thank you for your continued support.
If there is anything else that we can assist you with please let us know.

Camera Land
720 Old Bethpage Road
Old Bethpage, NY 11804
516-217-1000
Please visit our web site @ www.cameralandny.com

Hi
I was just wondering if Cadex actions are prefit compatible or do they need to be sent to a gunsmith for rebarrel

I am looking to rebarrel a Howa Mini action. Does anyone have a suggestion for a action wrench that would work for this action?

As title states. I have 389 pieces of Hornady 6.5 Creedmoor LRP once fired brass. All has been deprimed and tumbled with approximately 50 pieces being annealed. SOLD

Ok guys I am a Bolt gun guy. I am looking to buy one or the other seekins SP10 6.5CM or Wilson Combat super sniper. I will be running this primarily for Predator at Night with my Pulsar thermal on top. I have researched high and low and really need honest opinions seeing as I know very little about gas guns. I know I want a quality rifle but tell me why one over the other?

Hello All!

I really like the idea of centerfire PRS so I just purchased a 6CM, got a decent scope, some mags and ammo. Besides that, what is considered the bare equipment to go and have fun. I don't care about ranking or whatever, just want my equipment to run and have fun. Is a Kestral really that vital in the beginning? Do I need a tripod? What about a rangefinder (sounds important so I am guessing this is needed but what is most affordable to start out with?), Bipod - I'm sure that's critical, even to start out with, right?

I have several boxes of factory ammo coming and will work up my 100 yd groups and some DOPE next week.

I apologize in advance if this is redundant but I searched here and can't find exactly what I'm asking here. And yes, I have watched about 1000 hours of YT videos to get some ideas but I still have questions and having experts on the other end of the conversation right now would be super helpful. Thanks!

For Sale: Kahles K525i DLR Rifle Scope – SKMR4 Reticle

Up for grabs is a Kahles K525i DLR 5-25x56 precision rifle scope in excellent condition.

Details:​

• Magnification: 5-25x
• Objective Lens: 56mm
• Turret: Right-side windage
• Reticle: SKMR4 (first focal plane)
• Condition: Lightly used, glass is pristine
• Included: Original box, all factory accessories, and documentation

Price: $2,600 shipped to lower 48, no trades.​

This is a catch and release i found a 6mm after buying this i would rather have. This is a proof blank chambered by Dave tooley. 6.5 creedmoor 7.5 twist rate, 26 inch, weighs 3lb 12oz, threaded 5/8x24. I believe it had around 400 rounds on it, i have put 0 additional since owning it. 1 million dollars shipped ppff venmo preferred