Selling a few accessories from my first PRS rifle setup. Great products in like new or slightly used condition. See pics.

A) MDT BAG RIDER. MLOK mounting
*The light salt is from the first and only match it was used for last weekend.
*Lockup is tight and performs as intended.
*Will not ship in OEM packaging.
Price: SOLD

B) COLE-TAC FLAT BAG. OLIVE DRAB GREEN. CANVAS MATERIAL
*Bought new and unused from the Hide.
*Never taken outside.
*BACKBONE NOT INCLUDED.
*Will not ship on OEM packaging
Price: SOLD

C) WIEBAD CHEEK PAD RISER. FOR MAGPUL PRO CHASSIS. BLACK.
*Used for training range trips. Never saw a match.
*Cleaned and prepped for sale .
*Straps split for improved mounting capability.
*Will not ship on OEM packaging
Price: SOLD

Accepting Paypal FF and Zelle only. No notes.AVOID SCAMMERS! PM me first. No business in the thread please!

I currently in the works of switching setups from 5.56 to 6arc , gonna try to trade my NF NXS 3.5-15x50mm h59 with badger c1 mount w/accessories(cosine indicator , level, clif w/rmr plate and diving board) for a 6 arc upper if possible.
I will be with out a scope once I trade,
What scope do you guys recommend that fits the best bang for buck from 5-900 dollar range?

While going through some storage containers last night I discovered a complete Bushmaster lower (~2010 production), a stripped flat-top upper, and a 12.5" free-float handguard. It was almost like Christmas!

The Bushmaster lower was on a 20" HBAR rifle, so I'm not sure what spring/buffer is in it.

I also have an unopened Magpul PRS stock and CMC Tactical trigger group (single stage, 3.5 lb flat trigger) on the shelf.

If you were to build either of the subject rounds for a strictly range rifle, what length barrel/gas system would you use?

No competitions or hunting planned. I have a 6.8 SPC and 308 for that, if I wanted.

I reload but have nothing for either round.

I'm leaning to the 6ARC but have no experience with either.

All are unused except the G17/22 6004.

1) 6280-174, Sig p229r/229r with offset belt attachment - $45

2) *Used and cut trigger guard* 6004-8312, Glock 17/22 with m3x/m6x light (fits TLR-1 as well) - $30

3) G-Code OSH for 1911 (non rail) with RTI - $45

4) 6005-53, 1911 (non rail) - $25

5) drop thigh rig with quick release- $25

6 ) 6004-283, Glock 19/23 with thigh rig - $50

Prices shipped & insured. Zelle or Venmo only. No trades

Have a DPG built vudoo gen 1. Kenny built this in early 2023. Has under 1000 rounds on barrel. I have a vudoo 360 built by kenny and a rimx. Really wanted to keep this one also. But it is time to let it go. Shoots just like all kenny’s builds! 2100 shipped!

Used for about 6mos.
Excellent condition all around
OEM harness was a *** and broke in the cold.
I'm including a great condition Alaskan Guide harness
$old

And they will all be flying their hundreds of private planes in there as well...

Selling off some accessories I don’t have a use for:

1. Garmin chronograph - like new, no box $475
2. Hawkins lightweight 34mm rings 1.25 height $90
3. Seekins 30 cal 5/8x24 stainless ATC brake used - $65

I have 15 boxes available, 300rounds Total all with same Lot Number.

Only $25 per box.

Free Shipping if you buy all 15 boxes.

Selling a very well spec’d Mk12 Mod 1 upper built by the one and only D. Wilson. At the heart of the upper is a 1:7 twist, bead blasted Centurion barrel mated to a square forge upper with Toolcraft BCG/PRI Gasbuster CH and KAC FF RAS. A Centurion gas block (tabbed & pinned), and Allen Engineering brake + collar are affixed. The upper has 300 rounds on it and obviously been rattle canned, appearing more used than it actually is.

SOLD

No trades please.

SOLD

I have a set of 7 Saw Go/no Go gauges.
$200 shipped

Custom Leupold VXIII Long Range 4.5-14x50 30mm tube with 1/3 MOA Turret and Custom Grey Bull Precision reticle. $700 buys it!
Price is FIRM!!
Add $125 for Alumina Caps
Add $100 for Percison Seekins 30MM Low rings.

It’s been 4 years since I’ve competed in a PRS match. Just getting back in the swing of things and have signed up for a match this weekend.

What’s changed? I’ve read the rules but I’m more interested in the gear that’s now available that may give shooters a competing edge.

Current setup: v22 with 20” in a matrix chassis, Steiner T5Xi 5x25x56, trigger tech diamond, ckye pod

Ammo: Lapua center x, consistently low SD’s recorded with an average 1080fps

Bags: Armageddon shmedium


I’ve been eyeing new glass and electronic levels but I honestly don’t know where to start and I don’t want to chase gear. Am I missing anything that will help?

~ Jay

he does good stuff. i have doubts about him but he is human and i wasn't hired to judge his actions.

For Sale: Staccato XC 2011 handgun chambered in 9mm. This handgun is in absolute like new condition, fired less than 100 rounds. Handgun is sold with everything that came with from Staccato: soft case, 140 mm mag, 126 mm mag, rear iron sight plate, rmr plate. Handgun has an island mounted front sight and barrel mounted single port comp. Very very flat and good shooting handgun! No marks on this gun, could pass for new.

Staccato XC $SOLD

Thompson G2 or contender 20” Bullberry 30-30 AI barrel with a muzzle break.

I have not shot this barrel or even mounted it on an action. Got it from a member a while back and just decided to go a different direction.

I have nothing for it in terms of brass, dies, etc.

$200 Plus shipping. Thanks!

I went out to the range today and at the end of the session I shot an AQT target for funsies and wow, I'm rusty.



I still got an "expert" score but compared to the last time I shot this target I was down over 20 points and I was exhibiting bad habits, so it'll just have to be something I work on. I'm thinking about putting a red dot on the rifle, since I tend to shoot red dots better. Does anyone have any experience with these mounts?

LT 659 NV 1.535" absolute cowitness height for Aimpoint Comp M4/M4S

$110 shipped

BLACK FRIDAY BLOW OUT PRICING exclusively for Snipershide!

Included are ALL AGM thermals, night vision & accessories… ALL PRODUCTS!

Shipping included!
Crazy prices on…
Rattlers
Clarions
Adders

Just ask and you’ll get a price that can’t be beat.

I've got a Law Folder Gen 3 and contemplating installing it on a SP10. I am curios how it mates up with a LMT DMR stock or PRS Gen 3 stock. I can't seem to find and dimensions on the DMR stock and I think the PRS LOP would be too long for me.

Has anyone tried these combinations?

Thanks

I have been convinced that it is bad to put too much torque on a muzzle device. I am even more concerned about that with a bolt action long range precision rifle. So when mounting a muzzle device I typically use a low torque value and they always seem to stay in place for me. However, I want to mount a muzzle device as part of a QD system which means my hand will be putting torque on the muzzle device in both directions reapeatedly over time. I worry that will loosen the muzzle device over time and therefore it seems like a thread locker would be an approprate solution. The problem with that is people have me concerned about carbon build up in the muzzle device and it needing to be removed for cleaning periodically. If I mount the muzzle device with Rocksett, I can remove it with water and a low temperature. If I mount it with Loctite (or equivilant) I can remove it with higher temp and no water. Google says 550 degrees F. So my question then becomes, what is least likely to damage a barrel? Is it better to apply 550 degrees to it and no water or is it better to apply 212 to it and water? 550 degrees is well into temporing temps for steel. I would hate to destory or mess up the temper at the end of the rifling. 212 seems like a safe temperature for not changing the molecular structure of the steel but letting the tip of the barrel sit in boiling water seems like a lot of moisture in the barrel that could cause corrosion and that moisture seems like it would be working its way up the barrel into the action. I suppose I could plug the chamber to keep moisture out of the action. I would, of course, clean, oil, and dry the barrel immediately after boiling. So if anyone has any thoughts on this or, better yet, experience with it, I would love to know. Maybe neither option would harm the barrel. Thanks for the help.

Hey all,

I’m new to this forum so my apologies if I’ve gotten anything wrong.

I’m based in the UK and 16 years of age, and my dream and passion is to be a Sniper in the British Army when I join up at 18 and hopefully selected.

Recently I’ve been practising cam and concealment myself and made a ghillie.
Just wondering if anyone with more experience could give any pointers or tips which I could take away and practise with?

thanks for your time,

Josh

Ordered an extra barrel, switching calibers next time instead. Still has machining oil in the chamber from when they cut it. Never screwed on. Bartlein blank. If it shoots half as good as my other one it'll group 1/4". 650 shipped ppff.

InfiRay Rs75 1280 HD Thermal.

One of the best thermals out there with an absolutely amazing image.

Was purchased 7/22/24 so still has over 4.5 years of warranty left. I will include receipt with it. Includes 2 batteries, charging dock, rangefinder, case and manuals.

Found something else i want and dont use this as much as i thought So selling it to recoupe some funds.

16k new, asking 9500 (sold)

Open to partial trades. Interested in other thermals, ffp optics, axmc, or possibly something else.