1500 25 cal 134 ELDM all lot number 2230820

$550 shipped PayPal F&F

Desert Camo. Good condition. With Wiebad Gear cheek piece cover. I attached close-up photos of any blemishes.

11.5” Centurion FBI profile barrel converted for LMT use
- converted by D. Wilson Mfg
- gas block installed and pinned by D. Wilson Mfg
- feed ramps polished by Centurion
- unfired
- pictures have a SF 3 prong and that will not be part of the deal unless you specify

$350 obo

12.5” Hodge 5.56 barrel (can not confirm, but should be small port)
- converted by D. Wilson mfg
- fcd gas block pinned by D. Wilson mfg
- current had a SF 3 prong, but that will not be part of the deal unless you specify
- unfired

$600 obo

Mounted but not used. Comes with box, papers, scope covers. In excellent condition. Will come with Badger Condition One 34mm 1.54" 20 MOA cant mount.

$4600 or trade for FDE ZCO 527 with MPCT3 or MPCT3X reticle and cash.

Would also consider thermal optics as trade. Trade value on thermal will be closer to MSRP of the scope.

KRG Bravo 700/SA
It has a heavy arca rail, QD cup, LOP spacers, polymer rail, and a barricade stop (all KRG accessories)

It is grey in color and in great shape - the only place that shows any wear is on the mag release

SOLD

Used Triggercam 2.1
Works great, like new
$475 shipped.

Anyone know the folks at PEW Science?

I opted to pull the trigger an purchase a 1 year subscription this AM... and it failed to let me register / make the purchase.

Turns out that it doesn't like passwords with "special characters" in them... which is freak'n bizzare. It's as if they are purposely attempting to ensure your password can be hacked with the simplest of hash tables.

Are these guy reputable?

(Seriously. That the kind of stuff that went bye-bye 10 years ago...)

This is not a for sale post. I will not be listing what I have in detail. If anybody PM's me, I will not respond, I will delete it...


Ive been contemplating this for a while. Ive got "a lot" of reloading gear and components. At one point I think my primer stash was worth 15k based on then current prices...just to give an idea. I have barely shot a gun in the past 5 years out side of some random shotgun stuff I have done. I have no place currently to even setup my equipment so to even get it setup I would need to likely spend 600-800 bucks to build a decent work bench that would be presentable because it would have to go in my game room and be "out in the open" so to speak...so I cant build a cheap bench using some 2x4's and MDF like I used to have.

I thought about loading up 5k 9mm, 5k 45acp, and 5k 223 and then selling everything else, but then that pesky "no bench" thing comes up so I would likely just offload everything and then make a large order from somewhere of case lots of whatever.

The thing that ALWAYS keeps me from selling is the "what if" factor which will never change... Ive been in the reloading game since 2008ish(maybe 09) so I have seen various droughts and collapses. Everytime there is a drought I go "damn my shits worth xxxx, but if demand has sky rocketed maybe its not the right time to sell"...

I simply dont see myself with the time to touch this stuff or damn near even shoot a gun in the foreseeable future due to family and other hobbies. I dont need the money although it would likely just get funneled into my race car.

Im just in a quandary on this. I feel like I know the answer from everybody on here will be "are you fucking crazy" and "dumb fuck"...

Hello! I am brand new to the forum and I look forward to learning from the many wise people on here.

I am wanting to build myself a nice rifle. I can certainly buy one but I would like to learn and do the assembly myself. I am fairly familiar with the Remington 700 having shot a stock 7mm most of my life. This seems like a good model for me to base my new gun on.

The new gun will be a 6.5 CM. I am thinking Solus Barreled Action to start with? Would this be a good choice? Several forums seem to be high on this setup.

As far as stock I want to stay close to the classic look. I would love any advise on some good models.

Again thank you for any advise. I look forward to learning from everyone.

Looking for an Origin RH SA or a Barreled action to add to the stable. Let me know what you have. Strongly prefer stainless barrel. Lighter profile or no heavier than an m24

Caliber preference would be 300wsm, 6.5cm, 260

Accutac FC-4 G2 arca


Comes with spike feet

Used 3-4 times


300 shipped lower 48 PayPal ff

Hoping to get some feedback from the Hide on support hand/rear bag. I’m still relatively new and want to make sure I am applying the proper fundamentals.

When using rear bag is it best to rest the rifle on the bag, the webbing of your hand (between thumb and finger), grip a bag rider, or really just 100% personal preference. Based on online content and the varying information it seems to me to really be personal preference but I’m hoping to get some feedback from some seasoned shooters.

Thanks in advance.

Looking to sell or trade for another tikka

Impact NBK 90 degree bolt
ACE sporter contour 7.5 twist 20” length (0.75” at muzzle)
6mm creedmoor, ALPHA sammi freebore chambered by Kinport peak rifles
5/8x24 muzzle threading, <100 rounds shot through barrel
Bix and Andy tac sport Pro flat shoe - medium sear

$1700 shipped. Hunted with it and killed a nice buck with it. Likes hornady 108 eldms, that’s really all I shot through it. Will upload pics tonight.

Average velocity was 2835 fps with the 108s out of factory ammo

Only trades - tikka in 223, 6.5cm, 260, 7prc, 300wsm. Strongly prefer custom stainless barrel 18-22”.

WTT my like new atacr 4-16 mil xt for your like new atacr with Tremor 3

Selling my brand new (un-fired) S.S. 26", MTU contour barrel from PVA. Muzzle is threaded 5/8"-24. This barrel will fit the Mausingfield, Nucleus & Archimedes actions. $700 shipped.

delete

In the market for a 9mm suppressor and it seems like all the ones in my budget are out of stock or back order. They are also $150-$200 dollars cheaper than anywhere else.

Does anyone else have experience with other sites or have an idea on how regularly they get cans in stock?

I’ve bought a can using their kiosk and it was painless.

I could be wrong, but I’m worried about using anyone else because of the ATF process.

Like title says I have EXPS 3-2 for sell
$500 shipped

Leofoto tripod with head

Super custom tac table and stickers included


300.00 obo shipped lower 48 only PayPal f/f

This is a very lightly used S&B 3-20 Ultrashort with the Tremor3 reticle and mil adjustments. It has less than 200 rounds on it fired through my MR762. I bought it brand new from Euro optic but have decided to do a G28 patrol clone so I’d be open to trading for a S&B 1-8 DualCC in RAL8000 with the T6 reticle or sell it outright for $4,000.

Feel free to message me for additional photos!

Used but good condition. Great stock, just upgraded to an LSS-XL. Comes with MDT Mlok bipod stud adapter and 2 sling swivel attachments. Fits AICS SA mags.
$250 shipped, payment via PayPal F&F, Zelle, Venmo, USPS MO. SPF

JP Enterprise VMOS BCG Heavy Large Frame was used for one day at the range for testing, so roughly 30 rounds. I also have an extra stainless-steel weight, which I will include if you want to convert it to standard weight.

$375 shipped

Hey guys, I’m new and I want to post an item for sale. How do I do so following the guidelines?
Thank you!