I have 5 boxes of 100 Berger 30cal 245 LRHT bullets all same lot # 2201. 4 boxes sealed and one opened to take measurements.

$400 shipped.

Long shot but I’d like to buy a 7 saw type 2 reamer if anyone’s got one.

Has anyone used an OBW blank chambered for an AR-10?
What kind of performance did you see vs a bolt gun?

Selling a Triggertech duty single stage trigger. Pull weight is 3.5lbs. Also including a Triggertech ambi safety. Asking $125 shipped for both. Venmo only

So I put about 50 rounds through my new 20" B-14 in an afternoon, and while I'm not battered and bruised, it's not quite as comfy as I'd like. I'm a pretty new shooter, and my goal for this rifle is to shoot the snot out of it and get better. To some (reasonable) extent, barrel life be damned.

Can anyone recommend a good replacement for the factory pad? Bonus points if it looks a little snazzier than a Limbsaver Classic, but I'd be perfectly happy with the right footprint model. In most positions, I only use the top 1/2 -1/3 of the butt pad.

Box of 100 Hornady 7mm 166gr A-Tips lot# 2221043

$70 shipped

RCBS full length sizing die and bullet seater sets for 300 WSM (comes with 2 shell holders) and 22-250
$35 shipped for each one.
300 WSM sold
22-250

Anyone running a clip on with the KRG Bravo and their NV Backbone mount? Curious what height of rings it would take to get decent alignment? Thinking about moving my Super Yoter C off the scope.

For sale is my 25 PRC that simply didn't get the attention it deserves. 70 rounds through it shooting Berger 135s with H1000 in Lapua brass at a modest 3100fps

Pierce Shadow SA
Bartlein CF 24" 400modbb barrel with 5/8x25 muzzle threads. 1-7.5 twist #13 Rem Varm 5R rifling
TT Diamond Pro Curved trigger
Manners LRH
Hawkins Hunter bottom metal with mag

7lb 5oz with a magazine and area 419 hellfire universal adapter on muzzle.
9lb 7oz with 4-32 NX8 in Seekins rings.

Chamber was cut with a new JGS reamer. 25 PRC Blackjack 90. 0.090" freebore. I have the reamer print I can share.

Asking for $3500 shipped OBO.

Brass and Berger 135s and 133s will be available as well.

Once fired 6.5 Creedmoor Norma Golden Target brass all from the same lot. A little over 250 pieces. $80 + shipping.

Excellent condition, less than 2 mags fired.

***SOLD*** SHIPPED & INSURED to CONUS

Does anybody know what bullet this is? In the past this is the picture they have used for f2nd eldvt bullets? I can't think of a polytip 105 bullet.

I bought two units during the group buy from PRG & one of the guys who is now affiliated with SOK. Sent them both off to he who will not be named to have them unlocked.

THIS IS NOT THE APPLIED BALLISTICS MODEL.

I'm selling one as all I'm doing at night is sleeping. I'm not larping or have any friends who do such things.

Mounted, taken to the range, messed around with, could probably pass for new.

Soft case, mini disk, mount, pressure pad, manuals, target.

5K shipped next day air. - THIS IS SOLD

ITAR applies.

Bank wire or CC +3%.

Selling some ammo 200rds 6.5 creedmoor,

120rds - Hornady varmint express 95 gr v-max
60rds - AAC 140gr sierra match king
20rds - Sabre 140gr black tipped (vmax type bullet)
$250 shipped for all 200rds

(Cheaper if local in Houston tx)

Once fired Federal GMM 6.5 Creedmoor brass. 200+ pieces, $55 + shipping.

Leupold VX-III Long Range 6.5-20x40mm Duplex reticle 55146 with sunshade, alumina caps, no box, CDS dial (still 1/4 moa clicks for any cal), alumina 40mm intensifier kit, 30mm main tube.

$SOLD shipped lower 48, Zelle for payment, no trades.

Rings have sold, includes alumina caps, filters and sunshade.

As you guys have seen, I posted a Christmas gift thread, but there is no discussion allowed in the thread (the entire point is to assign a post number with a member that participates, nothing more). So, this will be the discussion for anything related to that Christmas gift thread! Post all you want over here, ask me questions about the gifts, etc.

My question to you guys - do you like the gifts in the Christmas gift thread? I hope it's stuff that guys here would be interested in, but it is stuff that's more tailored to the members who hangout in the Vintage Section.

Here's a link to the Christmas gift thread:

https://www.snipershide.com/shootin...ase-read-instructions-to-participate.7199530/

Noticed this listing for a new 1-10 trijicon LPVO browsing Optics Planet. Searched around and saw the same on Kenzie optics, but no details elsewhere.


Looks like a few changes from the 1-8 credo. Windage is now capped instead of locking/exposed like the elevation, and the reticle is now the same as what's in the VCOG SCO (not enough wind holds imo). Not sure the specs on optics planet are accurate since it keeps going back and forth between 30mm and 34mm tube.

Personally I'm interested. Not holding out hope for better brightness, but the 1-8 credo is my second favorite LPVO, right after the ATACR.

Look, I know that body armor is very useful. As a civilian that has absolutely no intention of getting in a shoot out. It seems to have no purpose for me. However my close friend keeps insisting that I get LVL4 ceramic plates and a carrier. Should I buy them or is this just hype? If "Stuff" hits the fan, I'm not going to make myself look like a target.
Am I wrong? Am I missing something?

My bro-in-law is in grad school researching and working with optics and lasers.

Anyone have any decommissioned or broken optics lying around that you’d be willing to donate? He plans to cut them open in the lab as part of his research.

I’ve already hooked him up with a couple cheap hunting scopes, primarily looking for other varieties of mid-grade optics. Don’t need ZCO quality, but something of decent build quality would be helpful.

I’ll cover shipping.

Thanks for your consideration!

Bnib MDT ACC elite chassis Rem 700SA Blue is sold and One in FDE $sold each shipped

Update one in FDE left BNIB

Hi all,

I am building a new 300 PRC, will primarily run it with a suppressor for hunting so I am planning on having.a short barrel spun up. Thinking 20 or 21 inches.

I currently have a 22" 300 PRC Seekins Havak Element that I am selling to build a custom gun (stupid, but I need to scratch the itch) and I am perfectly fine with the performance of that gun on game.

Question is, anyone have experience going shorter? 20, 21"? 20" would be phenomenal for me but not sure what people are pushing pills at with that barrel length. I do reload now, so factory loads are not something that will hold me back. Primarily will be loading the 190 grain LRX.

If anyone runs a 300 PRC at 20, 21 inches, would you mind sharing your bullet weights and velocity? Thank you in advance!

Edit: curious about twist as well in the shorter barrels, I am planning 1-9 which I think should cover me from the longer mono's up to the 225's.

I have 300 same lot brand new alpha 6gt brass srp $390 shipped with the cases

We have the Tangent Theta 7-35x56 with the Gen 3 XR fine reticle in stock! Order a scope get an amazing deal on the rings, so good I can’t post it. Message me for more info.