Impact 737 barrel by Stuteville m24 contour 7.5 T
26in threaded 5/8. Has be n shot 92 rnds and includes the 1x fired alpha brass fired from this barrel. Just got away from GT
$ 550 shipped

Bravo in like new condition, comes with Weibad cheek pad and minimalist spigot with KRG aluminum rail section. Gray stock panels with nice rattle can paint scheme.
$375.00 shipped

Trades:
3-18 or 5-25 Strike eagle plus cash on my end.

Selling as 1 lot. $100 shipped

5 round mags (3)
10 round mag (1)
10 round mag with 2 round extension (1)
10 round mag with 3 round extension has broken spring (1)
Orange safety mag (1)

Payment vis Paypal F&F, Venmo, or Zelle

As title says. FX True Ballistics Chronograph. Been to the range maybe 3 times. I just don’t shoot enough and don’t need all the extra features. Works perfectly.

$SOLD TYD, Pp FF or Venmo

Kahles k624i CCW LSW / SKMR3 with Tenebræx lens covers and throw lever
$1900
With spur mount $2200
812-556-9763 call or text

Selling my new in box 22" Seekins SP10M in 6.5 Creedmoor.

$4,500 Shipped

The difference between the SP10M and regular SP10 is:

The SP10M, has extensive testing performed all the way down to the parts selection. We handpick the components that will eventually all come together to complete that particular rifle. The components are measured before and after coating processes to even reconfirm the fitment and finish. The SP10M is currently being fielded for the US SOCOM Operations Tier 1 and Tier 2 units. We have tested both military issued ammunition and high-quality factory match ammo. The rifle is tested for accuracy before it leaves with high quality ammunition, each rifle receives a 60-round break in at the bare minimum. The rifle does not leave our facility unless it shoots half inch if not better!

Area 419 Hellfire self-timing muzzle brake. Slightly used (less than 500 rounds) with 5/8x24 adapter $125 TYD

Just curious,

How does one obtain the TBAC certificate? (Thunder beast)

Selling a new unused CRKT Kangee. Comes with kydex sheath. $125 shipped.

Accu-Tac bipod for sale
SOLD

$1300 shipped or trade for scope or Manners LRH SA or LA with bottom metal . Comes with two magazine, box and bag. Maybe 50 rounds through it.

Site has a 48 hour bump rule. You want to change the price then edit the original post between the 48 hours. Do it again and post will be deleted and you will be banned.

For sale. Price Drop
Custom Remington 700 SA, 6.5 PRC.
Action is blueprinted with fluted bolt.
Trigger tech special trigger.
Hawkins bottom metal.
(2) 5 round magazine.
Proof Research Carbon fiber barrel, 22”.
AG Composite alpine hunter adjustable stock.
Pic and arca rail.
Bipod is not included
Asking $2500.00 (OBO) without optic.
Will add optic for additional $1400.00.
The optic is a Zeiss V6 3-18x50

The rifle has between 130 to 140 rounds through it. It shoot .50 moa or less.

For sale brand new T2AGAP Should work with any Remington 700 clone.
Should be a drop-in install with the gen 2 mini chassis for most Remington clones.

Standard Fill
MCS-DBM SHORT ACTION MINI CHASSIS (GEN 2)
ADJ butt spacer 1/2 inch
1.35" Straight
GAP CAMO MOLDED

Leupold mark 5 5-25 PR2 mil New in plastic

shipped Friends and family or add on the fee

Selling some Lapua brass.

100 300WSM never fired, unopened box. SOLD

300 Discontinued 6.5x47. 100 is never fired still sealed, 198 has been fired twice and is primed with CCI450s. 2 were fire twice and are unprimed. They were used to check feeding and adjust mags. They have some minor wear from being cycled but should fire fine. The sealed box probably has 1 or 2 extra $300 shipped. SOLD

100 308 LRP. Never fired, unopened box. SOLD

My PayPal is locked up. Venmo gift or zelle only.

Daniel Defense RIS III 12.5​

New Daniel Defense RIS III 12.5" FDE rail. I mounted it and decided to go a different direction. My loss is your gain. Comes with all of the hardware and barrel nut wrench.

$375 shipped.

Noveske 16" Complete Upper​

Complete factory built Noveske 16" upper receiver. Comes with Noveske BCG, new PRI Gas Buster Charging Handle, and Rearden FHD muzzle device. Under 200 rounds total through it.

$900 shipped.

Selling Proof 6.5 Creedmoor comp contour for Impact 737/NBK. Stainless
Round count: 535
$350 shipped

Excellent condition, there's a really small ding on the elevation cap, very faint ring marks and a few even fainter rub marks on the obj. bell. No scratches or anything on the glass. I don't have the box for it, but comes with pictured MKM caps.






$700 shipped CONUS or $675 ftf, PP F&F or + fees, USPS or Walmart MO, cash, checks held until cleared.

Not really looking for any trades on this one.

Has anyone purchased a Remington 700, shouldered Pre-fit from Christiansen Arms? I’m curious as to how they can make prefit barrels for factory 700 actions with varying specs over the years. Anyone have experience with them or know how they do it?
Obviously the end user has to check headspace prior to use.

The last item on my bucket list is shooting a steel target at 1000yds. The closest 1000yd rifle range to my home is California tactical academy near lake Piru, CA.
I have never shot there and what like to hear from anyone who has experienced shooting there at 1000yds. Do I have to qualify and have a spotter to shoot 1000yds? Should I shoot paper and if so can I drive to the target area? I have over 10years of experience shooting 223 Remington at 400 to 625yds at Pala shooting range. My farthest distance is 862yds with a 243 Winchester. I am planning to do this in April for my 84th BD. I will have acquired a Savage 110 tactical in 6.5 Creedmoor by then and already have the Arken scope. Thanks in advance for any info.

Seeing what’s out there. Not interested in any other barrel or length

This is a custom-made 16" AXMC/SA forend tube with two folded Atlas 9-13" bipod legs. Super stable; lowered gravity center felt like a TRG set-up. It can be rotated and lockable. The last picture shows the look on my AXSA.

$385 shipped.

So as the title suggests, I need a compact scope and the only one I've ever owned are several NF 4-16x42's, which is not one of the scopes I will be considering due to the minimum magnification of 20X. Above all else the most important part of this decision is the GLASS.

Scopes on the short list are:

ZCO 4-20
Kahles 328i
Schmidt and Bender 5-20 Ultra Short

I have a ZCO 5-27, have had 4 Schmidt and Bender's (4-16's and 5-25's) and a Kahles 6-24, so I know the quality of the manufacturers and what they bring to the table, however since the quality of the glass is far more important to me then other features, I need to ask from people that have owned them or done side by side comparisons.

Did I mention the glass is important? Other than that, eyebox and how easy it is to get behind is at the top of the list as well. All other features are a moot point as the scopes will do what I need them to.

For sale as a package only:

•MK5 3.6-18, Tremor 3, non illuminated
•COMM 35mm w/ ARC ring
•P2 plate with optic riser
•Aimpoint P2

Note: ARC ring was FDE but spray painted black. Glass is immaculate.

Price: $old

No trades please & thanks!