Big Game - Benelli LUPO (300 WM) [need clear sight at distance > 500 yds ->budget under $2000]
Coyote - LWRC IC DI(5.56) & Tikka T3x Super Varmint(22-250) [NV? or Thermal? budget under $3000]


Based on the info above, recommend me some optics, please.

Getting rid of most of my reloading stuff - don’t have time to reload anymore.

I will sell each item for the price listed (shipped) or the whole bunch for $750.00 (shipped). If someone buys it all, I will make a few smaller shipments of groups of items.

All of the stuff is lightly used (less than 100 rounds reloaded) and a little dusty, but I will clean it all up before shipment. Manuals included for most of the items. Those items listed with a top plate have an Inline Fabrication top plate attached which mounts to the ultra mount.

The list:
- SOLD Inline Fabrication 4” tall micro quick change ultra mount with base plate installed and three single storage docks: $50 SOLD
- SOLD Lee Loadall II 20 gage with top plate: $50 SOLD
- SOLD MEC Sizemaster 12 gage with mounting plate: $175 SOLD
- SOLD Lyman Brass-Smith Ideal Press with top plate: $85 SOLD
- Hornady digital bench scale: $50
- Hornady M-1 Case Tumbler: $50
- Hornady Neck Turn Tool with top plate: $75
- Hornady Cam-lock case trimmer with top plate: $75
- Hornady Concentricity tool with top plate: $75
- Hornady Case Dryer: $50
- SOLD Annealeez Annealer (I think it’s Gen II): $100 SOLD
- Hornady Case Prep Trio: $75
- Hornady sonic cleaner (1.2 L): $75
- Hornady Auto Charge digital powder scale and dispenser: $150

PayPal only

Let me know if you have one you’d part with. Thanks

NIB unopened Leopold Mark 5 CF-455 Tripod Kit

$700

These are the 34MM @ 1" inch height model. If they have been used it was likely only once. $115 shipped. Payment via Venmo or Zelle.

Hey new member from North Carolina. Bought my first real rifle recently and enjoy practicing at the range. I also have two Dobermans, which I think are the best dog in the world.

Barely used Surefire tailcap and tape switch in FDE. Will throw in a picatinny tape switch holder from amazon. $65 Paypal FF. Shipping CONUS included.

Like new Razor Gen 2e 1-6x with JM-1 Reticle and Geissele mount. Only had about 1 month so no salt. Comes with Vortex throw lever, and Hammyprints scope covers. $1250 Paypal FF. Shipping CONUS included.

From a facebook page

Searched but couldn't find a good thread on titanium actions.
Besides hunting applications and situations that call for lighter weight builds, are there any major advantages and disadvantages to Ti actions?

Does accuracy suffer from either flex or loss of weight near center of mass? Are there barrel tenon or muzzle device issues due to the differences in metal mating surfaces? Etc?

Inquiring minds want to know.
Thanks in advance.

Login to view embedded media
My review of the MOE PR stock. TLDW: A pretty decent stock for quasi-precision work, such as a Recce Rifle.
Pros: Cheap, lightweight, good bag ride-ability
Cons: Open cutout on the bottom, no QD hole (though it has the ability to take an Mlok one), and it has a decent amount of wobble/rattle. Why Magpul can’t use whatever they have in the SL is beyond me.

Anyone else have one that wants to chime in? I’d be interested in your thoughts.

Yet another question...I'm going down the rabbit hole as of late and would appreciate your perspectives.

I have two rifles and two scopes...and I'm weighing which scope makes the most sense for the rifles in question. Neither will be used for hunting. Both for shooting paper and steel. So here goes...

Rifle #1: LMT MWS, SSR-E trigger, 20" Stainless 6.5CM
-Gets 2592 fps with 147 ELD-M. Subsonic at about 1400 yards
-Historically a 1 MOA gun with the .308 barrel. Don't have enough time behind the 6.5CM to say, but certainly no worse.
-Used to wear an early USO 1.8-10x42 FFP Mil illuminated. Heavy, but low profile. Now mounted on a 20" M40ish .308 build but could always slap it back on and put the NXS on the M40 thing.

Rifle #2: Tikka T3X TACT A1, 24" Stainless .308
-No velocities recorded yet, but probably 2650 fps with 175 SMK. Subsonic at about 1025 yards.
-Printed a 5 shot .57" group with 168 SMK, but first and only time behind the rifle.
-First outing it wore a NXS 3.5-15x50.

Scope #1: Nightforce NXS 3.5-15x50, MOAR, SFP

Scope #2: Nightforce ATACR 5-25x56, MOAR, SFP

Given the effective ranges of the particular cartridges, the physical size/weight of the two platforms and the two scopes (to include height over rail), magnification range and any other variables I'm not considering...which scope would you mount to which rifle and why?

Zeiss LRP S3 6-36x56 Mri/MRAD in stock $2,499.00 https://cstactical.com/zeiss-lrp-s3-6-36x56/


The ZEISS LRP S3 first focal plane riflescopes provide the best-in-class total elevation travel. In the world of long-range rimfire competition, the little 22 LR cartridge is frequently pushed beyond its intended limits. In turn, the capabilities and performance of the riflescope are tested at the extreme - with a key limiting factor for many scopes being sufficient elevation travel.

ZEISS LRP S3 636-56 offers the best solution for medium to extreme long-range shooting. The 6x-36x magnification range is combined with a 32 MRAD elevation turret which supports more precise shot placements.

.

All of the instructions I have found for setting up an expander die is just to open the mouth of the neck for bullet seating vs. resizing a bottleneck to a different caliber. I have an RCBS 3-die set. Can someone provide info on setting the die up? How far should I screw the expander down to resize the neck? Thanks.

Biden burning the American taxpayer to spite Trump.

Login to view embedded media

I'm looking for something that might not exist, at least as far as my Google skill is concerned.

I hunt a lot, and all over the country. My vision is some type of Goose Neck trailer with a tilt deck or low-boy style deck, long enough to carry a bunch of Japanese quarter horses or a bigger SxS; maybe both.

What I'm struggling to find is an option that has some type of overland type setup for remote camping. I don't need the creature comforts, but would pay for them if there was an all-in-one type deal. Ideally looking for something 4-season.

I'm not looking for a Toy Hauler / Camper setup. Have one. Love it. Need something lighter that can take some abuse.

Anyone come across something of this nature?

Preston

Listing up a new, unfired Baer Super Varmint .204R.
Les personally shot this one for a .5moa group. He has not built them for years.
3800 shipped to your FFL.
PM for photos.

CarverMaster stock duplicator. Can be used for guitars, table legs, etc as well.

Located in South Texas but willing to drive halfway to meet. Really don't want to ship this one but if someone wants it bad enough I can break it down and sell all the parts as I got them when new without the table. I built the table from 3/4" ply and used T slots so the tail stock can be easily positioned. Routered all the edges, finished in clear coat. Comes with everything to make a stock! Will include the router.

A link to the original kit from eBay:


These don't come with the router or the table and are currently going for ~$1200. This one has been used very little, I just don't have space for it anymore.

Asking $650 or trade me something cool for it.

-Dan

I’m listing the above SR 15 Mod 2 rifle and Mod 2 MLOK upper for sale.
Upper is in box, unopened. Rifle untouched.
The upper would need to be SBR’ed to put on a rifle. This has not been done. They are separate items never even in the same safe. The rifle speaks for itself. It has not been touched since shipped. This is the first time I’ve even opened the box.
I’ll send pictures to interested party or post later if I can get them to upload. The items have all papers and extras they are shipped with.
10,000 shipped to your FFL.
No trades.

Does anyone know where I can get an M24A2 barrel done up with the AEM M24 suppressor seating ledge?

Bonus question, what is a good action to work off of? I’ve heard the modern Remington actions are junk.

1400$ shipped for the optic, add $150 for the mount. Optic box included obviously.

Trades: red dot, spotter w/reticle, Crye g3 34x, mk5 3.6-18 T3

Brand new still needs bottom medal. 700 long action inlet dbm
Manners folder stock.
1400 shipped

Cleaning out some of my spare mounts and rings.

Badger 34MM Steel Rings - PN 306-14 - 1 inch high. Used Good condition shows use on the rail nuts. MSRP $210 - SOLD shipped


Badger C.O.M.M. 34MM 1.70" Lower 1/3 - PN 170-340. Used was painted, most of the paint has been removed. MSRP $318 - SOLD



LaRue Tactical SPR/M4 1.93" Mount QD LT135 - 34MM - Used - Excellent Condition MSRP $399 - SOLD shipped



Nightforce X-Treme Duty 34mm 1.54" 20MOA Dark Earth Ultramount A683 - Like New - MSRP $325 - SOLD shipped



Seekins Precision 30L 4/6 -30MM Low .82" combination 4 and 6 screw - New in box. MSRP $149 - SOLD Shipped


Spuhr QDP Unimount 36mm 0MIL/0MOA 1.5" Quick-Detach Picatinny Scope Mount QDP-6002 - Like New - no box. Wedge included. MSRP $575 SOLD Shipped




Trades

34MM or 36MM cantilever mounts Spuhr, Area 419

MPA magwell plate. Ordered the wrong one for my son’s rifle so selling it. Brand new, never used, just received a couple days ago. . Can ship today, December 17th from Texas or if you’re in the north Houston area possible meet.$55 shipped. Payment accepted; Venmo. Magwell plate is for

• Chassis Type:
  Matrix Pro/Pro II/Vanquish