Is this like getting pics of side boob at 16 years old or is there something awesome I’m not seeing
Is this like getting pics of side boob at 16 years old or is there something awesome I’m not seeing
Yes new glass on the way .. this will have to do for now…That a Bushnell scope?
Surprised no comment on the Leupy above it.That a Bushnell scope?
I saw that Democrat blue and scrolled right past didn't not pass goSurprised no comment on the Leupy above it.
Now you got me thinking should i have gone red instead of dark earth Leuppy user here too thoughI saw that Democrat blue and scrolled right past didn't not pass go
Now you got me thinking should i have gone red instead of dark earth Leuppy user here too though
I had an AW years ago, sold it and regretted it ever since, so I grabbed this one from a great member on here. These sticks are so sexy.
Beautiful rifleI had an AW years ago, sold it and regretted it ever since, so I grabbed this one from a great member on here. These sticks are so sexy.
ts the MDT Cyke-POD Gen 2 triple pull, really solid, I actually use it for hunting alot as its perfect for sitting positions or high heatherWhat is that bipod? looka Kind of like an atlas?
The river gives good splash at 2k!What do you have against trout fishermen?
I'm not 100% sure but agree that they should be interchangeable. Sporting Services states the MK3 mag fits in an AXMC on their site so that would mean it would also work in an AXSR.Seeing as this place is better than google for the related subject, I need some insight on a potential difference in AXSR magazines.
Local dealer has a couple .308 mags listed, one listed as an ASR mag, 28538BL, and one listed as an AX MK3 mag, 29066DE. Aside from one being black and one being DE, does anyone know the difference in these two? I'm assuming that the MK3 mag would be compatible as its essentially the same rifle as the AXSR, but I'd love to get some feedback from you fellas on what the deal is.
They are compatible mate. You will have no issues.Seeing as this place is better than google for the related subject, I need some insight on a potential difference in AXSR magazines.
Local dealer has a couple .308 mags listed, one listed as an ASR mag, 28538BL, and one listed as an AX MK3 mag, 29066DE. Aside from one being black and one being DE, does anyone know the difference in these two? I'm assuming that the MK3 mag would be compatible as its essentially the same rifle as the AXSR, but I'd love to get some feedback from you fellas on what the deal is.
Barrel break in?Word to the wise….found out that patch-out cleaner will eat the paint off of AI AX mags.
Breaking in a new barrel on my AXSA, I ran a couple of wet patches through at the range and put the gun in its case to allow it to soak for an at home cleaning.
Put the mag in figuring it would capture and run out, and I could just blow it out with compressed air in the garage.
Got home an hour later and took out the mag, and my beautiful sage green, master race paint could be wiped off around the feed lips and inside of the mag. I had to do a water douche and oiling to get the reaction to stop.
Figured the bottle said it was safe on all modern paints, I would be ok. Evidently the paint on the mags isn’t the same as the chassis. The chassis was fine.
Figured I would pass it on!
Word to the wise….found out that patch-out cleaner will eat the paint off of AI AX mags.
Breaking in a new barrel on my AXSA, I ran a couple of wet patches through at the range and put the gun in its case to allow it to soak for an at home cleaning.
Put the mag in figuring it would capture and run out, and I could just blow it out with compressed air in the garage.
Got home an hour later and took out the mag, and my beautiful sage green, master race paint could be wiped off around the feed lips and inside of the mag. I had to do a water douche and oiling to get the reaction to stop.
Figured the bottle said it was safe on all modern paints, I would be ok. Evidently the paint on the mags isn’t the same as the chassis. The chassis was fine.
Figured I would pass it on!
Hit send on a new Green AT 308, 26" with tactical brake.
Can anyone tell me where the thumb rests come from and arca rails for the foreend.
Also - will AW stock sides fit the new AT? - Have dremel will travel
So, it is going to be FS in a week?Here's the AW kit from the thread you heathens totally took a dump on last week haha
I'll admit, the seller wasn't doing himself any favors. Turned out to be a nice guy.
Haven't owned an AW yet but I'm looking forward to hanging on to this one.
View attachment 8273686
It's key to a solid 800m zeroBarrel break in?
This sounds like rimfire propagandaIt's key to a solid 800m zero
#freerecoilA photo of my buddy shooting during the Guardian match at Arena earlier this month.
I can’t say if he did or did not. The photographer at the match got the photo. It was a blind match so shooters didn’t get to watch each other. He obviously doesn’t control the rifle with his hand. But I do know he normally has a good rifle/shoulder connection.#freerecoil
That’s some good looking country!Good morning to stretch out and verify the stubby 308.
View attachment 8274781
View attachment 8274785
Good morning to stretch out and verify the stubby 308.
View attachment 8274781
View attachment 8274785
Nice....Good morning to stretch out and verify the stubby 308.
View attachment 8274781
View attachment 8274785
Okay, well you got me there but may I also remind you of the inconsistent nature of this setup at the 1000yd line….And why pray tell... Are you not running the 308 in the match tomorrow Mr I don't have ammo....
Central Utah.That’s some good looking country!
Where about is that? Nothing too specific. Just curious
16.5”?Good morning to stretch out and verify the stubby 308.
View attachment 8274781
View attachment 8274785
I've played with both next to each other.Let me know. I very briefly held an ATX at a shop and wish I had the AT next to it to compare. With the new short foreend on the BP version, I hope it comes available.
Any thought on just popping the barrel off the AT to test it out? Should be quick and easy?
Personal preference, obviously, but after shooting and carrying the AIAT for a few years, then dropping the action into the ATX chassis and shooting, carrying (hunting), I find the ATX is superior. Don’t want to carry, throw a TAB biathlon sling on it and hit the trail…I've played with both next to each other.
I liked the thumbhole better, not so much for the grip but more so because I don't find chassis very nice to handle (shooting or carrying).
Yes sir, 1:10 twist16.5”?
I would have said throat break in, but I was concerned of being called a whore lol.It's key to a solid 800m zero