Accuracy International Picture Thread

#18,951
A little AI VS SAKO competition today. My bestest AXSA ES, how did that color go again @Krob95 ?

High winds and 200 yards.

1000006340.jpg


1000006348.jpg


1000006341.jpg


The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.

1000006349.jpg
 
  • Like
Reactions: ta1on, JonKleman, TylerN and 1 other person
#18,952
BuLLet said:
A little AI VS SAKO competition today. My bestest AXSA ES, how did that color go again @Krob95 ?

High winds and 200 yards.

View attachment 8441217

View attachment 8441218

View attachment 8441219

The TRG with the shorter barrel didn't fair as well... though it only has 35 rounds through it.

View attachment 8441220
Click to expand...
How’re you liking the pmii 5-25 vs Tangent 5-25? Since you own both scopes. I’m deciding on a pmii 5-25. Or just get another Tangent for my next AI.
 
#18,954
  • Like
  • Haha
  • Sad
Reactions: Dendro, Rhed, carbonbased and 4 others
#18,955
jimsair said:
Where do you all get your Proof prefits?
Click to expand...
It wasn't a prefit. Custom job done by JR Firearms in the UK.

Nik H said:
I just put the same barrel on my AT. It is a hammer
Click to expand...
I've got an injured hand at the moment so controlling the rear bag has quite uncomfortable.. was still sub MOA at 900yds but nothing to shout about.

At 100yds it was .2 -.3 MOA groups all day... prior to my injury...

Don't wear wedding rings folks.. that's all I'll say as the rest is quite graphic 😆
 
  • Sad
Reactions: carbonbased
#18,956
Comparing the s&b to tt (5x25), I'd take the TT for sure. But with the s&b 6x36 I was using yesterday on the TRG, I'd probably pick that over the TT 5x25. My old eyes need some higher magnification :)

Rhed said:
How’re you liking the pmii 5-25 vs Tangent 5-25? Since you own both scopes. I’m deciding on a pmii 5-25. Or just get another Tangent for my next AI.
Click to expand...
 
  • Like
Reactions: Rhed
#18,957
JayjayUK said:
It wasn't a prefit. Custom job done by JR Firearms in the UK.


I've got an injured hand at the moment so controlling the rear bag has quite uncomfortable.. was still sub MOA at 900yds but nothing to shout about.

At 100yds it was .2 -.3 MOA groups all day... prior to my injury...

Don't wear wedding rings folks.. that's all I'll say as the rest is quite graphic 😆
Click to expand...
Ah, degloving? I have not the pleasure of experiencing that.

I wish you a speedy recovery.
 
  • Like
Reactions: Dendro, JayjayUK and x0mb13
#18,958
carbonbased said:
Ah, degloving? I have not the pleasure of experiencing that.

I wish you a speedy recovery.
Click to expand...
Yes indeed. Fortunately they saved my finger on the night and just needed everything stitching back together.

3 weeks later the wound has healed but still swollen like a balloon.. so trying to get back out shooting but after about 5 minutes of adjusting a bag with just my forefinger and thumb it was getting a bit sore 😅
 
  • Like
Reactions: Dendro and carbonbased
#18,961
xxflyingturtlexx said:
I hate mdt and am open to suggestions on 90 degree grips
Click to expand...

does it need to be 90 degrees? because this grip on an AR is the GOAT of grips and should be excellent on that chassis also.

ERGO FLAT TOP TACTICAL DELUXE GRIP – SUREGRIP® - ERGO Grips

The palm filling Tactical Deluxe Grip with aggressive texture. The top has been made flat so it will fit onto chassis system stocks that take AR-15 type grips. Although this grip will fit on an AR-15 type rifle the back of the grip does not lay flush with the back of the receiver (check out the...
www.ergogrips.net

id run it long before you grip that actually looks acute.
 
  • Like
Reactions: xxflyingturtlexx
#18,968
PSS 308 said:
I kind of wanted to get the AI ones
Click to expand...
I sympathize. If you give up, these are nice. Not as cool, but nice:

www.snipershide.com

Upgrade in cheek piece for Accuracy International Stocks

I know I saw somewhere, a pad to put on the cheek piece to make it more "tacky" than the stock one. Anyone know what I am thinking of? Thanks in advance.
www.snipershide.com www.snipershide.com

If you want the 25mm long non-AI ones I have and you’re in North America, dm me your address and I’ll send you them for free. They’re a little too long for my tastes (see link) but they’ll tide you over.
 
#18,969
  • Like
Reactions: HKSniper11B
#18,970
CANAVAR said:
www.sportingservices.co.uk

Accuracy International - Cheekpiece Thumbscrew (Single) - 20333

Genuine Accuracy International Cheekpiece Thumbscrews. Price shown is per screw. * Please note these no longer include AI logo. ** Not suitable for new AT-X.
www.sportingservices.co.uk www.sportingservices.co.uk
Click to expand...
These are available too. I've ordered from them several times and no issues.
www.sportingservices.co.uk

Sporting Services - Cheekpiece Thumbscrews (Pair)

Accuracy International compatible Cheekpiece Thumbscrews. Price shown is for a pair. * Not suitable for AT-X.
www.sportingservices.co.uk www.sportingservices.co.uk
 
  • Like
Reactions: HKSniper11B and carbonbased
#18,976
hafejd30 said:
Has anyone with an ATX played with the action screw torque?
Click to expand...
I plan on taking mine apart if i can find directions because the rear left screw was loosish and i never touched it before. I saw my proof barrel a tiny amount tilted to the left torqued to spec and went over all the bolts, that is when i found out one of the action screws was not torqued. It needs deep cleaning so i plan on taking it apart.
 
#18,982
I was dm’ing Husky but here it is apart somewhat:

IMG_8985.jpeg


Remove barrel (not mandatory, makes it easier if you have a long handguard/nv bridge)
Remove rear chassis bolt.
Remove front chassis bolt
Remove the bolt behind the mag release
Remove the (whatever you call the hinge/sling thingy)

Rail/chassis comes off

Remove 2 trigger screws
Then remove the 4 action screws the action comes off
 

Attachments

  • IMG_8986.jpeg
    IMG_8986.jpeg
    695.9 KB · Views: 48
Last edited:
  • Like
Reactions: TylerN, JonKleman, Dendro and 1 other person
#18,983
xxflyingturtlexx said:
I was dm’ing Husky but here it is apart somewhat:

View attachment 8442450

Remove barrel (not mandatory, makes it easier if you have a long handguard/nv bridge)
Remove rear chassis bolt.
Remove front chassis bolt
Remove the bolt behind the mag release
Remove the (whatever you call the hinge/sling thingy)

Rail/chassis comes off

Remove 2 trigger screws
Then remove the 4 action screws the action comes off
Click to expand...
I just took mine apart and torqued it. The rear screws almost felt like they were glued in. Damn near gave up I was afraid to strip them. Torqued the action screws to 35 inch lbs per the manual

The screw behind the mag latch is just for the mag latch. Didn’t have to be removed to remove the action.

Also the sling stud/catch for the folder thing…ya you can remove or install that anytime. Doesn’t connect anything internal. Just that catch itself. It’s really easy to strip the head on….ask how I know 🥺 In my defense it definitely was not in there at 8 in lbs
IMG_5817.png
IMG_6510.jpeg
 
#18,984
hafejd30 said:
I just took mine apart and torqued it. The rear screws almost felt like they were glued in. Damn near gave up I was afraid to strip them. Torqued the action screws to 35 inch lbs per the manual

The screw behind the mag latch is just for the mag latch. Didn’t have to be removed to remove the action.

Also the sling stud/catch for the folder thing…ya you can remove or install that anytime. Doesn’t connect anything internal. Just that catch itself. It’s really easy to strip the head on….ask how I know 🥺
View attachment 8442501View attachment 8442497
Click to expand...

The rear ones were really tight, and made good noise breaking loose. Front ones were hand tight.

I completely reversed that hinge thingy because it gets in the way of my hand and i don't rest my thumb on it. It is a mixture of parts from non hinge and hinge screws. Left side is the sling mount, right is flat bolt head.
 
#18,988
xxflyingturtlexx said:
I was dm’ing Husky but here it is apart somewhat:

View attachment 8442450

Remove barrel (not mandatory, makes it easier if you have a long handguard/nv bridge)
Remove rear chassis bolt.
Remove front chassis bolt
Remove the bolt behind the mag release
Remove the (whatever you call the hinge/sling thingy)

Rail/chassis comes off

Remove 2 trigger screws
Then remove the 4 action screws the action comes off
Click to expand...
How did you do that paint pattern? I really dig that.
 
#18,998
This past weekend was our monthly club match at Precision Rifle Queensland in sunny Australia. As always I was shooting my AT-X. This month had the 6 Creedmoor barrel spun on. Unfortunately, the wheels fell off for me in the last two stages and I ended up with 6th overall. When I got home and inspected the rifle, I realised the action was loose in the chassis. That would explain why the last two stages I couldn't hit much. It might be time to bond the action like my old AX.

IMG_4616.JPG
 
  • Like
  • Wow
Reactions: TylerN, xxflyingturtlexx, diggler1833 and 5 others
#18,999
PrecisionRifleGuy said:
This past weekend was our monthly club match at Precision Rifle Queensland in sunny Australia. As always I was shooting my AT-X. This month had the 6 Creedmoor barrel spun on. Unfortunately, the wheels fell off for me in the last two stages and I ended up with 6th overall. When I got home and inspected the rifle, I realised the action was loose in the chassis. That would explain why the last two stages I couldn't hit much. It might be time to bond the action like my old AX.

View attachment 8445359
Click to expand...
Did you ever double check the torque when you first got the rifle ? Just curious.
 
  • Like
Reactions: PrecisionRifleGuy
You must log in or register to reply here.

Similar threads

austino775
The AI Arctic Warfare Picture Thread
Replies
154
Views
13K
Bkultra
Bkultra
JSW2000
Accessories Accuracy international (M27) 6.5 Creedmoor barrel
Replies
5
Views
558
JSW2000
JSW2000
M
Current Surgeon vs AI Action
Replies
142
Views
4K
Milspec Longhorn
M
5
Firearms SOLD Accuracy International AT 6.5 Creedmoor
Replies
6
Views
2K
556mtjones
5
Unique Forest Green Mammoth
Accuracy International (AICS) 1.5 LA build questions
Replies
4
Views
202
Coejro
Coejro
Top Bottom
Back
Home
Forums
Merch
Alerts