Found mine in stock at a dealer months ago. I’d give them a call and “express” some frustrations.
Assuming you live in the US.
- Thread starter Tyler455
- Start date
Found mine in stock at a dealer months ago. I’d give them a call and “express” some frustrations.
Assuming you live in the US.
Asked for a refund to buy from a dealer that had one in stock
What he said.
I have been watching this thread on and off for a while and it seems like this gun is a lot of drama for a sub par accuracy gun..
Mine with the proof barrel is a hammer. The accuracy issues seem to be the Bartlein/Tooley barreled rifles. I don’t think it’s a coincidence that Q dropped that option.
.
So the issue was with two very well known and respected individuals/companies? Not only do I find that hard to believe (I don’t for a second), I’m surprised you’ve jumped to that conclusion. There’s much that’s helpful on here, but I think most thinking folks can file this under the bs and drama catagory.
So the issue was with two very well known and respected individuals/companies? Not only do I find that hard to believe (I don’t for a second), I’m surprised you’ve jumped to that conclusion. There’s much that’s helpful on here, but I think most thinking folks can file this under the bs and drama catagory.
Last edited:
I think there is some isolated cases of sub par accessory. But without knowing more I will not chalk it up to the gun. Mine is sub moa...
It should be for 3k, tgey should be guaranteed 1/2 moa. Masterpiece arms is 3/8.
If you want to talk guarantees. I can find ammo that won’t shoot 3/8 in masterpiece. Just like I can find ammo that can shoot half Moa in Q.
Functionally the difference between half moa and sub Moa is negligible for most people. When you start talking half of 3/8 moa everything has to be right and most shooters are not capable of it imo.
I am not capable of consistently shooting 3/8 group...
I understand that but I’ve seen it before in other rifles like when I carried my m24 in Iraq it was a 1/4 inch rifle. So I’d expect that with the right ammo. Especially when some of my cheaper bolt guns do 3/4 inch with the right ammo.
Take it for what you want, but yes, absolutely it’s around the models with those barrels. There’s reports of them barely shooting 1.5moa... tell me why that is but the rest shoot fine. Anyone that knows anything about precision rifles knows that the majority of the accuracy comes from the barrel and nothing about the design of this action would hinder accuracy as it’s basically a manually operated SR-25 as far as action lockup is concerned. As someone who’s been burned in the past I’m not the least bit surprised either.
I also have had no issues with my rifles accuracy, but I feel like people are trying to make a screw driver a hammer here. I Run my Fix along side my department SR/OBR intro course every other week and it shines. It hits what I point it at close, far, from the prone, kneeling, standing, off tripods of every configuration, uphill and downhill, when I’m freezing or tired and in a box with a fox. But I don’t look at an ultralight rifle with a pencil thin barrel and expect it to be a bench rest gun. Sling it to your back and take it for a hike or a hunt like it was meant to, you’ll love it.
Anyone looking for New PROOF RESEARCH 6.5CM FIX 24” Barrel for their FIX ready to go, PM me.
No complaints with my Bartlein/Tooley Barrel. 140 ELDs over 42.2 gr of H4350 in Prime brass hammers. Took a buck this fall with Barnes 127 LRXs too. Like someone said above, this is not a bench rest or PRS type gun. It's light and easy to hike with and shoot from non-prone positions. It's a lightweight gun which means you need to put more effort in maintaining good fundamentals if you want to shoot tight groups. So, if you don't have good fundamentals, it will show in your group size.
.
.
Last edited:
I have the 308 Bartlein/Tooley barrel and posted up two ffive shot groups at 200 yds and it is more accurate than I am with it at the moment.
Also, for you guys griping about wait times, I waited 53 weeks.
Also, for you guys griping about wait times, I waited 53 weeks.
Built my Fix at Q a few weeks back
Made it to Q's Instagram
Made it to Q's Instagram
I'd like to see the barrel for proof (lack of a better word there).
Guns have been built and shipped with Green Mountain barrels on them as well. I think some are getting guns thinking it has a Bartlein/Tooley barrel on it and it does not.
Just today got one confirmed.....guy thought it had our barrel and it does not! He got his rifle with a Green Mountain barrel on it.
This has been done in the past where a gunsmith and or manufacturer tell the customer it got so and so's barrel on it. We get a call saying the gun doesn't shoot. So I ask them to send the barrel in to us so we can look at it. Sure enough not our barrel. A good example is I had one customer that had 6 rifles and all supposedly had our barrels on them. Barrels come in and all of the barrels had 6 groove rifled barrels on them. I had to call the manufacturer up and tell them we we're not warranting any of the barrels for anything. The manufacturer asked why. I said not our barrels! Told them we never made them 6 groove barrels. So who's barrels did you put on the customers rifle? Phone went quiet! Manufacturer did it not once but twice.
Later, Frank
Bartlein Barrels
Figures, every single Bartlein Barrel i have owned has shot lights out. Not to say that one may possible get a bad one but it should be very few and far between.
Thank you for finally clearing up the matter with the manufacture. Are you still selling barrels to said manufacture?
So was the barrel labeled as yours but not, or was the customer just not educated and assumed it was a bartlein?
So the other night, I found an unattended lathe. I'm not a machinist or even skilled. But it seemed like a good time to put the 6.5 Bart/Tooley barrel on a diet.
Changed the taper:
Finished weight 2.7lbs:
All I did was copy the profile on a barrel fieldcraft. Sort of. Obviously cutting it down shorter would be more substantial in the weight loss category. There seemed to be a lot more meat on there then it needed to have.
Before the super barrel smith guys jump all over me--someone who doesn't want or claim to be a machinist. I went really slow and took off a little bit in each pass. It took like 22 min per pass on the straight part. Which means it took hours. Never got hot. Barely warm. Still shoots like a laser. Just not as heavy of a laser.
Changed the taper:
Finished weight 2.7lbs:
All I did was copy the profile on a barrel fieldcraft. Sort of. Obviously cutting it down shorter would be more substantial in the weight loss category. There seemed to be a lot more meat on there then it needed to have.
Before the super barrel smith guys jump all over me--someone who doesn't want or claim to be a machinist. I went really slow and took off a little bit in each pass. It took like 22 min per pass on the straight part. Which means it took hours. Never got hot. Barely warm. Still shoots like a laser. Just not as heavy of a laser.
Last edited:
I bought prime for the brass. It shoots MOA at best in my 6.5 fix bartlein barrel (spelling?). I’ve been working on hand loads but a majority of my loads the holes are touching. Prime is the only factory ammo I tried. I wish it liked it better
I am looking for another cherry bomb. Not sure if there is a specific “for sale” section for this rifle, or what ever I am supposed to ask. Anyone have a link? Or PM it I guess. Thank you
Just post it in the Accessories PX, ask and they will come.
Last edited:
Thank you
Q’s website has 5/8x24 Cherry Bombs in stock. Silencer Shop has both 5/8x24 and 1/2x28 in stock as well
I was looking for a used one to save some money. I found the for sale accessories area. for what ever reason I was having issues navigation the forum. Haha
So the other night, I found an unattended lathe. I'm not a machinist or even skilled. But it seemed like a good time to put the 6.5 Bart/Tooley barrel on a diet.
Changed the taper:
Finished weight 2.7lbs:
All I did was copy the profile on a barrel fieldcraft. Sort of. Obviously cutting it down shorter would be more substantial in the weight loss category. There seemed to be a lot more meat on there then it needed to have.
Before the super barrel smith guys jump all over me--someone who doesn't want or claim to be a machinist. I went really slow and took off a little bit in each pass. It took like 22 min per pass on the straight part. Which means it took hours. Never got hot. Barely warm. Still shoots like a laser. Just not as heavy of a laser.
Did you have the pre weight?
It was not marked Bartlein/Tooley. They assumed, for whatever reason, it was a B/T
I'd be happy to design a contour that would meet 90% of everyones requirements if there's enough interest.
Only problem with that is you have talked me out of every chambering I’ve wanted to try. Lol!
If I just pushed the easy button it would be the Win featherweight contour to save weight. Or I could get creative and push another easy button and use an AR-10 contour. I've got two Sig 716 6.5 blanks. I need to weigh them. Bartlein says for the FW only in CM but the Q 308 barrel is much smaller before the muzzle boss. I should be able to get them to make it for 308 based cases. None of you guys are going to hunt in -40 degree temps are you?
Negative. If I am.....something serious has gone wrong.
I think a 16.5 inch featherweight 7mm-08ai or 7mm SAW would be awesome...
I really want a 4-16 amg or similiar quality in 30mm tube to complete the light weight build
I really want a 4-16 amg or similiar quality in 30mm tube to complete the light weight build
I've got a 7-08AI reamer. Really slings 120's.
I think 7mm Creedmoor would be the best fit for the internal mag limitations. If I couldn’t run 162’s then to me anything 7mm would be pointless and i’d be better off with a 6.5 Creedmoor.
I’m thinking .22 Creedmoor for my next barrel, I think it would make for a great light weight coyote rifle.
I’m thinking .22 Creedmoor for my next barrel, I think it would make for a great light weight coyote rifle.
22 creed is too much barrel wear for me personally. I am curious how fast I could sling 162s in 7mm saw if I moved up to 18in
.22 Creedmoor would strictly be for killing, I played around with my standard 7-08 162gr load in a KAC mag and it wasn’t a good fit at all.
Creed on left. 7mm-08 on right. Saw in the middle
What were the issues with 7mm-08 was oal or feeding?
Creed on left. 7mm-08 on right. Saw in the middle
What were the issues with 7mm-08 was oal or feeding?
Overall length, bullet would have to be stuffed.
Similar threads
Suppressors Q Customer Service
