• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

GAMER CHANGER TESLONG BORE SCOPE!!! -- FINALLY A QUALITY REASONABLY PRICED BORE SCOPE!

Who did you contact to get the new mirror...I have been trying to get replacement...I bought two of the danders things and BOTH mirror fell off....

I went to the Amazon site, found the order, opened the missing or defective product, and it gave me a place to send an email to the manufacturer. I told them what happened and Mr Wong responded within mins. We emailed back and forth several times and I asked if I was going to get a mirror or the complete tip with the the mirror installed. They sent the complete tip.

If you already did that and have not had a response, I would try to get satisfaction through Amazon or if you would like for me to try to send them a msg, PM me your info and I will see if he still receives my emails through Amazon.

Steve
 
I went to the Amazon site, found the order, opened the missing or defective product, and it gave me a place to send an email to the manufacturer. I told them what happened and Mr Wong responded within mins. We emailed back and forth several times and I asked if I was going to get a mirror or the complete tip with the the mirror installed. They sent the complete tip.

If you already did that and have not had a response, I would try to get satisfaction through Amazon or if you would like for me to try to send them a msg, PM me your info and I will see if he still receives my emails through Amazon.

Steve


Thanks. Yes they responded a few hours ago... too bad they are having this issue.. the camera other than that is awesome
 
I bought this scoped....used it for 5 minutes before the mirror came off....lost forever...I contacted the company and have not received a replacement yet...I don't recommend you buy this until they get the issue with the mirror fixed!!!! Still waiting for a replacement....not holding my breath....

Update... company reached out to me to fix the problem.... shipping me new mirror today... hope they get this issue resolved.... if they do then I would highly recommend this bore scope...
 
Ever since I got the adapter that moves the USB connection away from the Android phone so the cable twisting does not cause a disconnect the borescope works great. I love that scope. I also got me a small cell phone stand that makes it easier to see the screen while guiding the scope for $7.59

https://www.amazon.com/gp/product/B07BK5P5ST/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

Everything together fits in the Teslong case and looks as if it should have come in the same package. Easy fix for a minimal add on price and beats the competition in price and quality by miles.
 

Attachments

  • 20190902_143734.jpg
    20190902_143734.jpg
    563.5 KB · Views: 75
  • 20190902_143843.jpg
    20190902_143843.jpg
    641.4 KB · Views: 71
I think this borescope is going to be the best things to come along for barrel sales in a long time!!!! Funny how I was happy with my rifles until I saw the ugly inside story!!!
Photo on 9-1-19 at 3.19 PM.jpg
 
I think this borescope is going to be the best things to come along for barrel sales in a long time!!!! Funny how I was happy with my rifles until I saw the ugly inside story!!!
Still happy with my rifles, new and old, don't neglect and don't scrub like you have OCD and the picture doesn't need to be ugly until the fat lady sings for the end of accuracy after thousands of rounds.
 
Wow to this borescope. I’ve been hesitant on ordering this as I’ve ordered 2 others on amazon and returned them after one test. Received mine yesterday and decided to give it a go today. Great quality camera. No 1080p it seems but I must say it’s worth buying this over a Lyman for cost and quality. Easy to use on Mac OS X and comes with the USB-C adapter which my laptop uses. No need for additional software - just use photo booth. Tested this on 3 rifles, new tikka and Bergara with tons of rounds through it, perfect smooth bore but my newish howa 1500 in 6mm CM with only 200 rounds through it.. this crap (see pics)

691B110F-6E16-4656-9075-14233A89E22A.png7D5CA9B2-1AA1-48C4-9915-5CD7B7463F68.png
 
  • Like
Reactions: gigamortis
Having tested this first hand --from an early release prototype with a friend who was help the team overseas develop it... (Peter you are a Saint!) I have to say hands down.. the BEST BORE SCOPE TO HIT THE MARKET SINCE ---EVER!! The price is finally cheap enough that the regular Joe can afford it without any loss of quality compared to the big brand names with unacceptably high price levels of $750 for the Hawkeye and $300 for the Lyman.

FINALLY a QUALITY CHEAP CAMERA THAT FITS 223!

BRILLIANT JOB PETER! Thank you for all the hard work and the months of back and forth with the team overseas. BTW Guys.. Peter did this out of the goodness of his heart! He is dedicated to the sport. He made not a bloody penny for all his hard work to get this thing made.

THIS IS THE GAME CHANGER in BORE SCOPES GUYS!! I'm really happy to be the one announcing it here... I'll eat my hat if you aren't thrilled with it!!

Here's is my test video when asked to test the prototype on my AR15 taken just days ago.



Thank you for your original post. Despite all of the positive reports in this thread, I was very hesitant to buy this because I normally do not buy something new to the market from an unknown (to me) company. But like a lot of others, I thought for $50, I'll take a chance.

I bought this, used it, and am very happy with it. I did not have a missing mirror or any other problems. For anyone wondering, this was easy to set up and use (and I am NOT a very technical person with computers or electronics).

I really do feel like this product will change the shooting industry. There is no more guessing about bore condition for the average shooter. We are going to learn a lot collectively, and be much better informed (with our own guns and in general).

This is the best $50 I have spent in a long time.

Thanks again.

Joe Mamma
 
Exactly where is that in your bore? Going out on a limb because there are no dimensions but what's visually in the picture doesn't indicate a significant problem

It is about 4 inches in front of chamber....gun shoots .5 moa with my handloads......This camera is a game changer...!! No question now if your barrel is clean or not!!
 
  • Like
Reactions: m1marty
Update... company reached out to me to fix the problem.... shipping me new mirror today... hope they get this issue resolved.... if they do then I would highly recommend this bore scope...

UPDATE
Receive my new mirror DHL shipped today....I must say I am impressed with the customer service.....AFTER a bit of a rough start....I initially loved the camera...for about 5 minutes, until the mirror fell off.....I reached out on their webpage for support...they reply but them kinda went silent...I really like the image quality so I bit the bullet and ordered another thinking I would keep working on the replacement mirror while I order the new one...the new one arrived....loved it for 15 minute...then again the mirror fell off...I was livid!!!! but this time I found the mirror and epoxied back on myself....no issues since....the next day the product manager reached out to me on this website and took care of the issue.....shipped me two new mirror tips.... SO in the end, they backed up their product...and I can tell you this IS a game changer....BEST $50 you will ever spend for gun care without a doubt!!! I will write up a better review but for now I CAN HIGHLY recommend this camera!!!!
 
It is about 4 inches in front of chamber....gun shoots .5 moa with my handloads......This camera is a game changer...!! No question now if your barrel is clean or not!!

Who cares if it's clean... Shoot it
 
  • Like
Reactions: gconnoyer
I just got one and just wanted to say this thing is awesome. Differently worth the 50 bucks
 
I'm going to scope my Omega suppressor and throw it up here for shits and grins. Got about 4,000 rounds through it so I'm interested to see what it looks like. It definitely needs a cleaning.
 
I finally bit the bullet and got one of these borescope cameras. Turns out that my normal cleaning regimen of nylon brushing with Boretech followed by two 30 minute soakings with Gunslick foam was only getting my barrel about 80-85% clean. I dug up some old Butch's Bore Shine from years back put it to work with excellent results on the fouling that the other two products never removed. I'm stoked for my next range trip with a camera verified clean bore. We'll see if my 1/4 MOA pet load goes back to doing what its known to do.
 
"Houston, we have a problem!"
I just went to Amazon to place one on order and got the following message:

Teslong Rifle Bore Scope, 0.2inch Gun Barrel Borescope Camera with Short Focus Camera, Side-View Mirror, for Windows, Mac, Linux and Android
by Teslong
4.7 out of 5 stars 66 ratings
Currently unavailable.
We don't know when or if this item will be back in stock.
 
Yeah i saw that too. I ordered one directly from the company yesterday.


SamePrice but Shipping is not free though - 9 bucks
 
Yeah i saw that too. I ordered one directly from the company yesterday.


SamePrice but Shipping is not free though - 9 bucks

I just rechecked Amazon and although I can see the correct camera when I do a search, clicking on it only brings up the larger endoscopes. It appears Amazon has taken it down. I'm curious if Teslong has stock available to ship out. Swagner2000, let us know when you have a tracking number or the scope arrives?
 
I got email confirmation for the order. I will report back when I get a tracking no. From what i can tell its shipping from China so I am expecting a couple of weeks for delivery at least.

If it goes DHL or FedEx prolly 2 days.
 
I received two shipments from them via DHL, the tracking number they sent didn't work.

I think it was three days total from order to having it on my doorstep...
 
Maybe we should start a thread of side by side pics of the worst borescope pics with the best 5 shot groups.
 
  • Like
Reactions: Earnhardt
I'm convinced that this thread verifies what so many of us already know, there is still much mystery to what makes an accurate firearm. Too many variables to link it to just two or three things (metallurgy, tooling, machining, finishing, chambering, pressure curves, harmonics. bedding, bullet profile, bearing surface, position, hold, trigger pull, cleaning technique, bullet run-out, component quality, component variables from lot to lot). Throw in environmental factors and we're lucky to hit anything. It's the challenge of making it all work together consistently that drives us to pursue this obsession. It would be boring if it were too easy!
 
My camera quit working after a few weeks and 5-6 uses. OP is going to give me the sellers contact info so I can get it replaced.
 
Last edited:
You should be able to contact them via one of their other borescope offerings.

I'm on my 3rd unit...I quit putting them back in the case as it seemed to break the connection. I now store the unit like a cleaning rod and bend it as little as possible when in use.
 
  • Like
Reactions: Dolomite_Supafly
You should be able to contact them via one of their other borescope offerings.

I'm on my 3rd unit...I quit putting them back in the case as it seemed to break the connection. I now store the unit like a cleaning rod and bend it as little as possible when in use.

I think that will be what I do from now on. Sucks it happened right in the middle of my working on a barrel.

The OP responded to my PM so I think it will be getting sorted out.

Thanks
 
Your welcome...Teslong was very responsive every time I contacted them and they didn't hesitate to replace the unit.
 
Does anyone have a link to anywhere that has them in stock. Everywhere I can see is out of stock
 
This is the company’s website to order.


I ordered one at the beginning of the week and just got shipping confirmation and tracking. It is shipping from China so keep that in mind if you order.
 
Does anyone have a link to anywhere that has them in stock. Everywhere I can see is out of stock
I just received an update notice from Teslong indicating that they expect to have the improved version in stock with Amazon for shipping in 5-7 days. The notice stated that they have improved cable connections, mirror adhesive, quality control, included a larger box to house the cable and instructions not to wrap the cable too tight.
 
  • Like
Reactions: neomastiff
Interesting, haven't had issues with my mirror. Connection is spotty at the USB end, but I can sort that out with a little wiggling. Don't use it much, just after a clean to see if it's good enough. Guess I'll start hanging it like my cleaning rods as well if it's an issue.
 
I'm going to scope my Omega suppressor and throw it up here for shits and grins. Got about 4,000 rounds through it so I'm interested to see what it looks like. It definitely needs a cleaning.
Please do, I would love to see the inside of the baffles after your round count. This is a good point, for those with suppressors, show the inside of those. And if it is really gummed up, how do you plan on cleaning it?
 
Ok... first up is my 6.5cm (proof stainless) 719 rounds ( 50 rounds since last cleaned) About 400-ish with RL16, the rest is H4350 and Factory.
8DA22F9D-39C1-4EAD-90FC-4BB79E757135.jpeg

End of the chamber, into the throat.

F92C854D-EFCB-4C3A-B7F4-18291AB12F13.jpeg

Start of the lands. Got some cracklin goin on... oh noes!

5B3A3030-D200-475F-B313-5455A5EBD509.jpeg

About 2 inches past the throat.

DFFF6705-BF65-426D-856D-2791C5B53A0E.jpeg

Group I shot last weekend with it. Definitely time for a new barrel.

Next up: 6mm Creed ( Proof Stainless). 95 rounds down it. All factory 108 match, haven’t cleaned it yet.

3244FC80-40E4-4B68-85E5-432836CBEB30.jpeg

End of chamber, into the throat.

4BC41120-7C92-46BC-B27F-52DD782F8167.jpeg

Start of the lands... look at that copper.

F608C274-780A-4032-9E4F-BD9BD02C2697.jpeg

2” into the lands.

C8031417-548A-4856-BDB1-3B145D3A2042.jpeg

Not bad...

And... my SilencerCo Omega. Somewhere around 4,000 rounds of 223, 6mm, 6.5mm and 308 through it. This was hard to capture, but still shows off how good this little scope is

BAE4B020-87C4-4E34-8DD9-C2D737F97681.jpeg
 
PSA I just checked Amazon and they have the Teslong Borescope back up and available for pre-ordering based on an in-stock date of October 1st. As a Prime member I opted for the free 2 day shipping. I'm hoping for an early Christmas delivery October 3rd.
 
I got email confirmation for the order. I will report back when I get a tracking no. From what i can tell its shipping from China so I am expecting a couple of weeks for delivery at least.
When I ordered mine, it shipped directly from China, and surprisingly it only took about 4 days to get here ( Wisconsin ). It shipped damn fast.
I am very happy with the scope, it works great and the pics are very clear and show great detail.
Chris
 
When I ordered mine, it shipped directly from China, and surprisingly it only took about 4 days to get here ( Wisconsin ). It shipped damn fast.
I am very happy with the scope, it works great and the pics are very clear and show great detail.
Chris
Did your scope come with instructions not to roll up the optic cable too tight?