• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

KRG Bravo Chassis

Jayjay1 said:
Hey guys,
I have a Bravo incoming soon.

Could you tell me which sort of paint might work best on the stock´s plastic?
I mean, are there some sort of paints that would harm or weaken the plastic, and which paint holds best on to the stock?

I would appreciate any info.
:)
Click to expand...

I dont think you'll find a paint that would hurt it.. are you asking about a rattle can job?

All I did was scotch bright it, hang it, brake clean, paint, then clear coat. Try to avoid using it for a week or so and you'll have a pretty strong paint job.
 
  • Like
Reactions: Jayjay1
J-Ham said:
Well that's not the craziest theory I've heard. I will say that my spigot is very solid & I'm happy with it.

When you say 'a lot more wobble', what do you mean? A lot more than what? I've not fired my rifle with the bipod anywhere other than on the spigot, but I've got Arca everywhere so I could check it out for ya.

I will say that our rigs are somewhat different... I only have to stabilize a 20" Proof CF barrel.
Click to expand...

Comparing this to another rifle of equal weight. Only difference is the barrel is 2" shorter. Same bipod.

By wobble, I mean what you would see if you were shooting from say a tripod. Granted, NOT that exaggerated, but no where near as still as I can get when behind my other rifle. Just curious if the bipod being closer to me would cause this. Maybe I'm reaching.
 
Jayjay1 said:
Hey guys,
I have a Bravo incoming soon.

Could you tell me which sort of paint might work best on the stock´s plastic?
I mean, are there some sort of paints that would harm or weaken the plastic, and which paint holds best on to the stock?

I would appreciate any info.
:)
Click to expand...
Krylon or rust o Leum work just fine. Don’t cake on layer after layer and it won’t chip as easy. Don’t use cheap no name brand rattle can stuff.
 
  • Like
Reactions: Jayjay1
Choose a good brand, prep it and follow the instructions. Ideally for long lasting, do thin coats and do a lot of them (4-5 thin coats with 10-15 minutes between) clear coat goes on thin so you can do 2-3 of those. It's really not rocket science... it's worth practicing on cardboard and starting each coat with a quick spray on card board.

This is what I used.
20190920_120852.jpg


I used a sponge so coats were thicker and had more time to dry between each so that colors didn't run together. The paint sticks well to the roughed up surface of the bravo nothing to worry about there.

20190914_183121~2.jpg
 
  • Like
Reactions: Matt_3479, SD Carpenter, quikcolin and 3 others
I just got a Bravo...put my Tikka T3 in it,it's great. Only issue I have is if I push mag against a barricade it won't feed. . .it is slightly wiggly. How to fix? Thanks guys
 
I assume you mean you are pushing rearward, it's tilting the mag a bit and it's pulling the feed lips and nose of the bullet down.

Get a barricade stop and use it, don't push on the mag.
 
  • Like
Reactions: SonicBurlap
T
DanGTG said:
I assume you mean you are pushing rearward, it's tilting the mag a bit and it's pulling the feed lips and nose of the bullet down.

Get a barricade stop and use it, don't push on the mag.
Click to expand...
Thanks...I did, and it helps of course....just dont like mag being a bit floppy
 
You could probably shim it, but really you'd just be inviting problems. I don't have a Tikka but I do remember seeing that someone made a filler piece for the gap under the action at the front of the magwell, something like that could be customized to make the front to rear a bit tighter, but, if it's overdone you risk fighting the mag in and out.
 
  • Like
Reactions: TnDoc
It looks like I'm wrong, it's for the R700

shop.shortactioncustoms.com

KRG Mag Block

Easy to install, seamless magazine changes! Gen 5 Whiskey 3's and prior, for standard handguard and Remington 700's and clones only, will not work with Enclosed Forend or Gen 6 and later models. The KRG Mag Block was developed for the Kinetic Research Group Whiskey 3 Chassis to fill the gap...
shop.shortactioncustoms.com shop.shortactioncustoms.com
 
  • Like
Reactions: TnDoc
Isn't it the tikkas that allow you to move the trigger guard a little? Loosen the screw, move it so the mag doesn't wiggle, tighten the screw. I recall seeing that I think?
 
Finished coating these barreled actions late last night.

Blue - 20” 8tw MTU IBI barrel; 223AI on a Howa

Sniper Grey - 16” 7TW RemVmt IBI barrel; 223AI on a Ultimatum U300

Blue one is a buddies, the 16 is mine. can’t wait to get them to the range.
 

Attachments

  • DAD2BD6C-159D-4AE2-B9DE-F426963AF425.jpeg
    DAD2BD6C-159D-4AE2-B9DE-F426963AF425.jpeg
    651.1 KB · Views: 486
  • Like
  • Wow
Reactions: Gleetu, SlimySquirrel, BallisticPrimate and 5 others
Hennig said:
Finished coating these barreled actions late last night.

Blue - 20” 8tw MTU IBI barrel; 223AI on a Howa

Sniper Grey - 16” 7TW RemVmt IBI barrel; 223AI on a Ultimatum U300

Blue one is a buddies, the 16 is mine. can’t wait to get them to the range.
Click to expand...

Your rifle is purdy! Do mine! ?
 
I just saw it on pics.

The system is sitting in kind of a V-formed aluminium rail?

So I´m just curious if anyone bedded his system into this rail?
 
LeftyJason said:
Why? It's a chassis. That's one of the benefits of a chassis. Put the rifle in yourself, torque it down and go shoot.
Click to expand...

Ok, thanks, I was just wondering because it says that systems can be different in their outer measurements.
But if the accuracy is there, fine with me.

Thanks again.
 
Jayjay1 said:
Ok, thanks, I was just wondering because it says that systems can be different in their outer measurements.
But if the accuracy is there, fine with me.

Thanks again.
Click to expand...
That''s what the V-block is supposed to achieve; one way or another the action rests inside and makes contact with the aluminum V-block while the barrel is free floating, only connection with anything else is where it is threaded into the action and maybe a muzzle brake, or a suppressor.
That's the beauty of the chassis, no messing with goo like resin, or MarineTex; just screw it in there, torque it correctly, and off to the range you go. If you decide to use the chassis for a different action, no problem, while your bedded stock was printed to the last and should require grinding, sanding and fitting for the next, and depending on how skilled the guy performing the bedding and new inletting was, might never be the same.
 
  • Like
Reactions: Jayjay1
Just put on the spigot mount from KRG. Not cheap, but love the difference it makes with being more stable.

Just ordered the ARCA rail. Really like how easy this thing is to upgrade. Keep’em coming @Massoud
 
Corradopsi said:
Are there any current promo codes floating around for KRG? I'm picking out my accessories for my bravo and it's adding up fast :ROFLMAO:
Click to expand...

Don't know of any codes, but waiting until black Friday stuff starts or Brownells does that $10 off 100, $20 off 200, ect. deal once in a while. you can save yourself about $40 that way.
 
  • Like
Reactions: lash
Lunchbox27 said:
Just put on the spigot mount from KRG. Not cheap, but love the difference it makes with being more stable.

Just ordered the ARCA rail. Really like how easy this thing is to upgrade. Keep’em coming @Massoud
Click to expand...

Thank you! We've got several Bravo items coming within the next several months. Hopefully you'll find them useful.
Justin
 
  • Like
Reactions: Nebulous and Tx_Aggie
Massoud said:
Thank you! We've got several Bravo items coming within the next several months. Hopefully you'll find them useful.
Justin
Click to expand...

Hopefully your South African dealers will decide to import some, I've yet to be able to find ANY Bravo accessories locally. I've been VERY happy with the Bravo so far.
 
Most have been to the web site and know about the heavy LOP spacers and the forend weight, and have been on the notification list to receive an e-mail once they are available. TmDoc can correct me if I'm wrong but I believe his question was not directed to the issue if KRG will produce a weight system, but when it will be in stock and available for purchase.
There are other ways to add weight with bag filler material, lead, or stainless steel shot, with or without resin. decoy, or tire lead weights, a.s.o. but KRG sure can make a pretty penny by getting the LOP and forend weights out there, maybe by adding a designed weight kit to the grip, cheekpiece, or an insertable weight for the buttstock.
A lightweight chassis stock is great for hunting but a great many who have purchased the Bravo use it for range and competition shooting, and balance and weight is a prime concern not necessarily how light it is. The modularity of the KRG chassis line and interchangeability is a definite plus, although not all parts fall into that catgory.
Having the ability to add, or shed weight on a stock/chassis is one of the reasons why I''m choosing the KRG Bravo over say a Manners, or McMillan for my next custom build, besides the ability to add, or change features, and not have to worry about having to add bedding, pillars, or DBM metal.
Hopefully the weight kits will be in stock on the KRG web site soon. Santa will be getting a workout if they are is my prediction.
 
Jackomason said:
Choose a good brand, prep it and follow the instructions. Ideally for long lasting, do thin coats and do a lot of them (4-5 thin coats with 10-15 minutes between) clear coat goes on thin so you can do 2-3 of those. It's really not rocket science... it's worth practicing on cardboard and starting each coat with a quick spray on card board.

This is what I used.
View attachment 7150480

I used a sponge so coats were thicker and had more time to dry between each so that colors didn't run together. The paint sticks well to the roughed up surface of the bravo nothing to worry about there.

View attachment 7150481
Click to expand...
Great job with paint.
 
How can you tell if you have the updated bravo backbone? Considering a TL3 and want to be sure it'll fit before i purchase.
 
bornhunter04 said:
How can you tell if you have the updated bravo backbone? Considering a TL3 and want to be sure it'll fit before i purchase.
Click to expand...
Get it from the KRG web site and you're guaranteed to get the new version.

Edit:
Did you already buy a used one? Then send Justin a.k.a. Massoud a message he'll be able to tell I'm sure.
 
What Cerakote have people done with the Sako Green stock? I’m wanting to Cerakote the action and maybe barrel but would love to see some ideas. I’ve got a brand new ctr non stainless.
 
SonicBurlap said:
Get it from the KRG web site and you're guaranteed to get the new version.

Edit:
Did you already buy a used one? Then send Justin a.k.a. Massoud a message he'll be able to tell I'm sure.
Click to expand...

Yes. I know the new ones have the 10x threaded holes, just not sure what that looks like.
 
Does anyone know where I can get a OD limited rotation sling mount that will work in the X-ray chassis? I have the OEM QD sling cup, but I want to use a limited rotation QD cup.
 
Gobears16 said:
What Cerakote have people done with the Sako Green stock? I’m wanting to Cerakote the action and maybe barrel but would love to see some ideas. I’ve got a brand new ctr non stainless.
Click to expand...

E5122A4F-4410-426C-B172-2B7842251B9C.jpeg

I did Midnight Bronze with my Highland Green Whiskey 3 and like the combo. Otherwise Sniper Grey/Tungsten/Cobalt would be safe and classy combinations.
 
  • Like
Reactions: Massoud, reubenski and Gobears16
Anyone know if KRG does holiday sales or has one coming up?
 
ratton said:
Does anyone know where I can get a OD limited rotation sling mount that will work in the X-ray chassis? I have the OEM QD sling cup, but I want to use a limited rotation QD cup.
Click to expand...
Maybe not the most elegant solution but a friend who had one of these left over from an AR had it mounted on his X-ray via pic rail.
grovtec.com

Picatinny Swivel Mounts

Swivels Not Included. Mounts to Picatinny Rails. Quality aluminum construction is light and strong. Moveable mounting allows for precise placement. Type-III Black Anodized. GTSW278Full Rotation push button base allows for freedom of movement. GTSW258Limited Rotation allows the sling to move...
grovtec.com grovtec.com
 
Last edited:
You must log in or register to reply here.

Similar threads

N
SOLD KRG Bravo Chassis - FDE - Remington Short Action
Replies
2
Views
346
edlin_79
edlin_79
sdman11890
SOLD KRG Bravo Tikka Stock
Replies
4
Views
207
Reformedcitykid
R
ReconFister
Accessories KRG Bravo REM 700 SA
Replies
2
Views
609
ReconFister
ReconFister
Doc_Holliday
SOLD Updated: KRG Bravo Tikka T3 Chassis AICS - $300
Replies
7
Views
547
Basher
Basher
R
Remington 700, Remage barrels. KRG Bravo chassis
Replies
7
Views
966
russ10x
R
Top Bottom
Back