Vudoo Gun Works V-22 Rimfire Bolt Action

[Dthomas3523]

New year new things!!!

RIFLES ONLY, Inc. in collaboration with Vudoo Gun Works is proud to announce the opening of the “Rifles Only Rimfire Academy”!!!

The academy will include instruction and courses in all things rimfire. Fundamentals of Marksmanship, movers, alternate positions, competition rimfire, competition train ups, and much more.

Scheduling will begin soon for 2nd quarter 2021. Locations will include the famous Rifles Only facility in Kingsville, Tx., and Colorado, with the possibility of more locations to come.

We will also be standing up a Rimfire specific portion of the Kingsville facility. This will serve as a dedicated area for training and competitions.

 

[littlepod]

There can be variations in actions that affect feeding height and require different mag catches, even though all the mini chassis are the same. My PRS-TCS needed a shorter mag catch for most AICS mags in centerfire, and I had to get a longer catch for the Xylo/Vudoo combo.

My aluminum mags fed well from the Xylo, but the poly mags would not feed the last 2 rounds given how low the mag sat and the spring not pushing the round far enough on the last 2 rounds.

I ended up also getting a teensy bit higher mag latch for the Xylo just to have it work always.

 

[winniethepooh]

At the 200 today

 

[RAVAGE88]

I believe this might be a bit timely....



MB

 

[Krob95]

Well this is perfect timing as I have my vudoo waiting on a background check at MHSA. Definitely going to be trying this out when I get it put in my chassis!

 

[Gjmen22]

New year new things!!!

RIFLES ONLY, Inc. in collaboration with Vudoo Gun Works is proud to announce the opening of the “Rifles Only Rimfire Academy”!!!

The academy will include instruction and courses in all things rimfire. Fundamentals of Marksmanship, movers, alternate positions, competition rimfire, competition train ups, and much more.

Scheduling will begin soon for 2nd quarter 2021. Locations will include the famous Rifles Only facility in Kingsville, Tx., and Colorado, with the possibility of more locations to come.

We will also be standing up a Rimfire specific portion of the Kingsville facility. This will serve as a dedicated area for training and competitions.

View attachment 7514545

Any chances of bringing this training to the mid-west?

 

[17rupert]

I believe this might be a bit timely....



MB

Thanks MB this answered a lot of questions I have had about fitting magazines for my two V22’s

 

[Dthomas3523]

Any chances of bringing this training to the mid-west?

We will bring it anywhere there is enough interest to support a class or clinic.

 

[rick137]

I believe this might be a bit timely....



MB

Your video made no mention of bedding. If I understood it, for a least a Manners stock with pillars, or perhaps any stock with the appropriate pillars, installing a V22 barreled action is a pure drop-in. Just torque the action bolts and you are good to go.

 

[unoigo]

Finally got the Vudoo put together. 20” kukri barrel action, diamond 2 stage, manners TCS with a Vortex Strike Eagle. So far it’s a shooter, although the Midas + has been a let down.

As others have mentioned, it doesn’t balance, rail is full of weight and the rear weight has been removed. I think I will add an Area 419 brake to put some more weight out front. Haven’t weighted it but it’s heavy. Going to be full moving it around during our NRL22 match this weekend.

 

[littlepod]

Finally got the Vudoo put together. 20” kukri barrel action, diamond 2 stage, manners TCS with a Vortex Strike Eagle. So far it’s a shooter, although the Midas + has been a let down.

As others have mentioned, it doesn’t balance, rail is full of weight and the rear weight has been removed. I think I will add an Area 419 brake to put some more weight out front. Haven’t weighted it but it’s heavy. Going to be full moving it around during our NRL22 match this weekend.

A few things you can do.
Ask Manners for the steel arca rail instead of the aluminum one.

Get the KSS ATS tuner, it's 8oz. A hellfire brake is only like 4oz.. or get both and then it'll be 12oz

The tuner at least will improve your groups, the hellfire brake

 

[unoigo]

Thanks. The steel rails are on back order, that was my first thought but will get one eventually. Good call on the tuner. Yea, the brake was more so for weight, nothing more.

 

[TeebirdsRoc]

I'm not trying to open a can of "rimfire cleaning" worms, but I have a question about the video Vudoo posted recently in regards to cleaning your rifle. Mike mentions not letting your brush extend all the way out of the barrel, just the tip, in fear of damaging the crown. I was always taught growing up to make sure the brush protrudes all the way out, in fear of the brissles doing damage when changing direction with the rod (? I guess) Is this just for brass brushes? Has anyone else heard this? Thanks for any input

 

[b6graham]

I'm not trying to open a can of "rimfire cleaning" worms, but I have a question about the video Vudoo posted recently in regards to cleaning your rifle. Mike mentions not letting your brush extend all the way out of the barrel, just the tip, in fear of damaging the crown. I was always taught growing up to make sure the brush protrudes all the way out, in fear of the brissles doing damage when changing direction with the rod (? I guess) Is this just for brass brushes? Has anyone else heard this? Thanks for any input

i pull both ways with a brush in centerfire and rimfire

patches only go 1 way though

 

[Sgeorge]

I never put a brush in my rimfire barrels. Never, ever, ever. Lol

 

[unoigo]

I must be the luckiest bastard around as everything feeds from all my mini chassis stocks. Centerfire AICS and rimfire. LOL Have had multiple Rem 700, Surgeon, Bighorn TL3(.308 and .223 bolt heads) and Vudoo in mini chassis and all feed great.

Same here. Multiple Manners stocks for R700 and Tikka footprints and never an issue. Just put together my Vudoo the same way I do centerfire my centerfire rifle and zero issues.

 

[TeebirdsRoc]

i pull both ways with a brush in centerfire and rimfire

patches only go 1 way though

I was more referring to the location of the brush when pulling the rod back through. Mike specifically talks in the video about letting the tip of the brush poke out the end of the barrel, but not pushing it all the way out. I was always taught that you didnt want to change directions with the brush still inside the barrel

 

[TeebirdsRoc]

I never put a brush in my rimfire barrels. Never, ever, ever. Lol

I know lots of people with this thought process. Both my factory CZ457 and RimX Bartlein start getting cold bore flyers after about 600-1000 rounds. Do you not have this issue?

 

[littlepod]

I know lots of people with this thought process. Both my factory CZ457 and RimX Bartlein start getting cold bore flyers after about 600-1000 rounds. Do you not have this issue?

People don't generally realize coldbore flyers because they zero their rifle and then it doesn't exhibit it again unless it doesn't get shot for a while.

But yes after a few hundred rounds on my Vudoo, I'll get a coldbore flyer for the first 2 shots as it's softening that carbon ring.

 

[Bradu]

Just got my barreled action and noticed it didn't have trigger pins. The ones on my bench are too big, what diameter do they need to be?

 

[unoigo]

Just got my barreled action and noticed it didn't have trigger pins. The ones on my bench are too big, what diameter do they need to be?

I thought the same when I received mine. They were in the small bag with the action screws. Did you check that?

 

[Krob95]

Here she is in all her glory Picked her up tonight and assembled. Got the mags to all fit and feel nice and tight in the mag well. I’m happy with it!!

@littlepod you were way right about the balance, it feels much better with the 20” MTU barrel on it and almost balances perfectly.

Also my trigger pins were in with the action screws as well @Bradu

 

[Bradu]

I thought the same when I received mine. They were in the small bag with the action screws. Did you check that?

Didn't get action screws either which isn't a big deal since I already have some with my bottom metal. Also, just noticed the set screw for the bolt disassembly isn't there like in the video.

 

[unoigo]

Didn't get action screws either which isn't a big deal since I already have some with my bottom metal. Also, just noticed the set screw for the bolt disassembly isn't there like in the video.

That’s very strange. If you bought it new from a dealer or gun store, I would give VGW a call tomorrow morning. I’m sure they will send you what you need. Hell, even if it was 2nd hand, I’m sure they would get you what you need.

 

[Bradu]

That’s very strange. If you bought it new from a dealer or gun store, I would give VGW a call tomorrow morning. I’m sure they will send you what you need. Hell, even if it was 2nd hand, I’m sure they would get you what you need.

I bought it from Mile High and emailed them about the trigger pins. Was looking everything over and happened to notice the allen screw so I'll need to reach out to them. I was originally just looking to try to get it up and running by the weekend but looks like that isn't going to happen.

 

[mercracing]

Finally got the Vudoo put together. 20” kukri barrel action, diamond 2 stage, manners TCS with a Vortex Strike Eagle. So far it’s a shooter, although the Midas + has been a let down.

As others have mentioned, it doesn’t balance, rail is full of weight and the rear weight has been removed. I think I will add an Area 419 brake to put some more weight out front. Haven’t weighted it but it’s heavy. Going to be full moving it around during our NRL22 match this weekend.

How does your mag fit your TCS? Does yours feed ok?

 

[littlepod]

Here she is in all her glory Picked her up tonight and assembled. Got the mags to all fit and feel nice and tight in the mag well. I’m happy with it!!

@littlepod you were way right about the balance, it feels much better with the 20” MTU barrel on it and almost balances perfectly.

Also my trigger pins were in with the action screws as well @BraduView attachment 7515787

Christmas for both of us!

Just installed the ZCO -

 

[Krob95]

Christmas for both of us!

Just installed the ZCO -

View attachment 7515842

Beautiful man!!

 

[littlepod]

Beautiful man!!

Thanks! Yours too. Man with the fully loaded setup, it's at 18.9lbs. That's with the 1.2lb bipod, and magazine and all, but still heavy! I have the .5lb tuner coming in the mail in a few days too..

 

[Krob95]

I’ll have to weigh it and see how heavy it is, but she’s chunky forsure. Not 18.9lbs heavy, but close haha

 

[RandomWAguy]

Can anyone comment on where the balance point is on a bravo stock with kukri profile?

 

[Rob01]

 

[RandomWAguy]

reply of the day sir

 

[littlepod]

The limited run stainless KSS ATS tuner looks good on the stainless Kukri barrel -

 

[huntnh]

Looking for a 20 inch barreled action anybody have them in stock?

 

[rick137]

The question is, does bedding improve accuracy/precision to a significant extent if a Vuddo barreled action is bolted into a stock with aluminum pillars? Since words like significant are ambiguous to say the least, by significant I mean 0.050 MOA or more.

Since there have been no replies to said question several hypotheses are possible: (1). Everybody uses a chassis so the question is moot; (2). Everybody but me knows the answer and considers the question trivial; (3). Nobody knows the answer including me, which is why I asked the question.

Well, so be it. There is a sample of one that I know. @Tiger_Shilone bolted his Vudoo barreled action into an AG Composites stock with pillars and shot an 6x5 Challenge that is "good enough for me". So until there is evidence to the contrary I will follow his protocol.

 

[Rob01]

I don't think bedding is going to help any significant amount when compared to today's chassis and Manners Mini Chassis which all hold the barreled action in the same place securely with no movement which is what you want. Some stocks with just pillars might do that but you would have to check to see if bedding or at least skim bedding is needed to hold the action. I think it's less significant in a .22 as there is not a large amount of recoil to make a shift as significant as a centerfire would.

 

[littlepod]

The question is, does bedding improve accuracy/precision to a significant extent if a Vuddo barreled action is bolted into a stock with aluminum pillars? Since words like significant are ambiguous to say the least, by significant I mean 0.050 MOA or more.

Since there have been no replies to said question several hypotheses are possible: (1). Everybody uses a chassis so the question is moot; (2). Everybody but me knows the answer and considers the question trivial; (3). Nobody knows the answer including me, which is why I asked the question.

Well, so be it. There is a sample of one that I know. @Tiger_Shilone bolted his Vudoo barreled action into an AG Composites stock with pillars and shot an 6x5 Challenge that is "good enough for me". So until there is evidence to the contrary I will follow his protocol.

I guess the "significant extent" would be how well the chassis was machined to the exact same tolerances as the action, and given that machine tolerances stack you could have significant extent of gaps.

I see no harm in ever bedding, it's whether or not your time/effort is worth it. My Vudoo out of the box shoots in the .25" with 6x5 at 50 yards, and a .7" at 100 yards. I'm going to play with a tuner first

 

[Jefe's Dope]

Well I guess we're ending 2020 with bedding and tuners. Everyone's dropping their suppressors and Midas isn't worth the extra over Center X.

I miss my suppressor but groups are better.

I don't think bedding is needed IF you're using a 'chassis' type stock.

I have more Midas than Center X and I should've just sent it to Lapua back in April.

Now I need to buy a tuner.

Happy New Year.

 

[littlepod]

Well I guess we're ending 2020 with bedding and tuners. Everyone's dropping their suppressors and Midas isn't worth the extra over Center X.

I miss my suppressor but groups are better.

I don't think bedding is needed IF you're using a 'chassis' type stock.

I have more Midas than Center X and I should've just sent it to Lapua back in April.

Now I need to buy a tuner.

Happy New Year.

I have had my silencerco sparrow sitting in my safe for the past year... It will end up going on a fun light rabbit hunter thingy one day...

I'll let you know how the tuner goes, right now the .5lbs of weight at the muzzle is basically a cheap way of me getting "MTU" weight w/o having to rebarrel my Kukri vudoo.

 

[phlegethon]

I don't think bedding is needed IF you're using a 'chassis' type stock.

That seems to be the consensus, and it makes sense. But it does make me wonder—people obsess over the proper technique for bedding so the action is not under stress, but there must be stress induced by the slight mismatches between a chassis and action? Perhaps stress doesn't matter if it's consistent? That would make sense too...

 

[rick137]

I don't think bedding is going to help any significant amount when compared to today's chassis and Manners Mini Chassis which all hold the barreled action in the same place securely with no movement which is what you want. Some stocks with just pillars might do that but you would have to check to see if bedding or at least skim bedding is needed to hold the action. I think it's less significant in a .22 as there is not a large amount of recoil to make a shift as significant as a centerfire would.

@Rob01:

If I may ask what is skim bedding?

 

[Dthomas3523]

That seems to be the consensus, and it makes sense. But it does make me wonder—people obsess over the proper technique for bedding so the action is not under stress, but there must be stress induced by the slight mismatches between a chassis and action? Perhaps stress doesn't matter if it's consistent? That would make sense too...

Not bedding solely because of chassis is some weird theory someone came up with and people have propagated.

The logic is only sound if the chassis is cut specifically to that brand/model (foundation for example is milled for specific actions). If it’s just a “700 pattern” then it’s now a game of maybes. Not all actions that are a 700 foot print are machines the same. For example, round vs gusseted actions.

.22’s will be less susceptible to needing bedding in general due to the reduced recoil.

I personally test my rifles. I torque everything down and then whack it around with a dead blow hammer. If the zero moves, I’ll toss another optic on and re-torque. Hammer on it again. If the zero moves again, chassis gets bedded.

 

[rick137]

That seems to be the consensus, and it makes sense. But it does make me wonder—people obsess over the proper technique for bedding so the action is not under stress, but there must be stress induced by the slight mismatches between a chassis and action? Perhaps stress doesn't matter if it's consistent? That would make sense too...

@phlegethon:

Even if the match between the action and the chassis were perfect, the act of torquing the action screws would induce a non-uniform stress field in the receiver. The action screws induce a tensional stress in the receiver. A compressional stress in the receiver is created by the compressional of the pillars and the compression of any portion of the chassis in contact with the receiver. For an aluminum chassis that has mismatches with an aluminum receiver would definitely create a more non-uniform stress field than if perfectly mated. But, as you say, if receiver and chassis are firmly bolted together so the stress field doesn't change from shot to shot, then the non-uniformity created by the mismatch probably has little effect on accuracy/precision.

With stocks perhaps mismatches less importance if stiffness of the aluminum pillars is much greater than stiffness of the stock material.

 

[rick137]

Not bedding solely because of chassis is some weird theory someone came up with and people have propagated.

The logic is only sound if the chassis is cut specifically to that brand/model (foundation for example is milled for specific actions). If it’s just a “700 pattern” then it’s now a game of maybes. Not all actions that are a 700 foot print are machines the same. For example, round vs gusseted actions.

.22’s will be less susceptible to needing bedding in general due to the reduced recoil.

I personally test my rifles. I torque everything down and then whack it around with a dead blow hammer. If the zero moves, I’ll toss another optic on and re-torque. Hammer on it again. If the zero moves again, chassis gets bedded.

Great operational procedure. May I ask what is the tolerance for zero change before bedding?

 

[rnaylor2]

Well I guess we're ending 2020 with bedding and tuners. Everyone's dropping their suppressors and Midas isn't worth the extra over Center X.

I miss my suppressor but groups are better.

I don't think bedding is needed IF you're using a 'chassis' type stock.

I have more Midas than Center X and I should've just sent it to Lapua back in April.

Now I need to buy a tuner.

Happy New Year.

Roger on sending it to Lapua.

 

[SirDrinksAlot]

I’ve put about 600 rounds through my Vudoo since I bought it. I gotta say I love this rifle.

This thing is on a whole nother level in regards to smoothness of the action and accuracy. I haven’t taken any photos of my groups with the V22, but it blows my Bergara out of the water.

 

[SourGrapes]

Haven’t got a chance to shoot mine yet but just wanted to put it in a chassis to see how it looks, excited!

 

[Dthomas3523]

Great operational procedure. May I ask what is the tolerance for zero change before bedding?

For my vudoo, pretty much anything. I zero at 30yds. So if it moves much at all, I’m not happy.

I tend to be cautious and bed if there is any doubt. As it will either change nothing or help. No negative outcome.

 

[goneballistic]

I just got my first vudoo yesterday. I shot it last night and it's amazing. I have one question though and can't find an answer in any of the threads.

When I push the bolt home it stops against the breech face, and the bolt will not go down. If I push down, even with some force, the bolt sticks.

To get it to go down I have to actually apply some forward pressure. It doesn't take much, but it's there, if I don't push forward and down, it's stuck.

Is this normal? Or is this cause it's new and that will get better at some point. It's kinda distracting cause sometimes I have to push enough to disturb the sight picture. In 100 rounds it felt like it was getting lighter but not a ton.

Ammo was center x, aguila match, Norma match and sk standard+. This is also a lefty rifle.

I love the rifle though and the mpa chassis just makes it that much better. I can't wait to shoot it at 100.

Update on my vudoo, I fought this issue for a bit but then sent it to vudoo to look at. Long story short, they replaced the cocking piece and did some other stuff and completely fixed the situation.

Bolt is much smoother now, closes without needing any forward pressure. They also pulled the barrel and checked the headspace I think cause it's more accurate now and BUTTER smooth.

Insanely good customer service, they went above and beyond and shipped it back to me, no charge.

Just wanted to update on the situation and thank vudoo for making an amazing rifle and completely taking care of a customer.