Dave what camera system did you get to work with the ZCO, I have tried 2 with no success.
In another thread he mentioned the Tactacam. Triggercam is releasing their gen2 which will work with the ZCO this year.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Offer valid until 9/23! If you have an annual subscription on Sniper's Hide, subscribe below and you'll be refunded the difference.
SubscribeDave what camera system did you get to work with the ZCO, I have tried 2 with no success.
Dave what camera system did you get to work with the ZCO, I have tried 2 with no success.
Question for anyone running a Leupold Mark 5 on their Vudoo. Do you struggle with the parallax only going to 75yds? I have a Mark 5 and am thinking of putting it on my vudoo when I get it but wasn’t sure how it would work at like 50yds with parallax only going to 75yds.
How do you like that NX8 on the Vudoo? I am debating between that and a Leupold Mark 5.Nightforce NX8 in Nightforce low rings. 40 MOA rail. Kukri profile. Hope this helps.
View attachment 7366052
How do you like that NX8 on the Vudoo? I am debating between that and a Leupold Mark 5.
Just do it bro. I just got rid of mine though lolA lot. I want to get a ZCO but I'm having a really hard time justifying it.
Just do it bro. I just got rid of mine though lol
Do you have a tangent theta I don’t know about?? Lol that’s what’s replacing it. Another TT.Why? What did you replace it with? Why didn't you offer it to me?
Do you have a tangent theta I don’t know about?? Lol that’s what’s replacing it. Another TT.
Let us know what you think of the new kahles!Now I need to look at the TT... I just sold one of my ZCOs to get the Kahles DLR though. I think the ergos on the DLR look pretty tempting.
So you sold your TT for the ZCO to sell for another TT?Do you have a tangent theta I don’t know about?? Lol that’s what’s replacing it. Another TT.
The first one got traded for my AXSA, the zco with the mpct 3 got traded for the TT lolSo you sold your TT for the ZCO to sell for another TT?
Or me?Why? What did you replace it with? Why didn't you offer it to me?
Let us know what you think of the new kahles!
Sorry, the other Jeff can have it, I don't like that reticle.Lol y’all will get first dibs at the tangent theta in a month when I decide I don’t want it anymore
I like the idea behind the Gen 3xr but the floating dot is 2x bigger than the dot in the ZCO mpct 3I do like the GEN 3XR
ARC mediums are what I use with a Cronus BTR and 40 MOA rail.What height scope rings for 56mm on a 40moa base?
ARC mediums are what I use with a Cronus BTR and 40 MOA rail.
Are you running a sunshade and the NV bridge? I have an MTU profile so I don't see why it wouldn't work on your gun.I have a 40 rail and an Athlon Cronus BTR on a MPA Hybrid started with the medium and went to the high ARC rings. Everybody fits differently even to the same rifle. Hard to know until you try it.
I forgot I switched some stuff around. I am currently running my Vudoo in the Hybrid Chassis, the top rifle in the picture. This is the Ares ETR not the Cronus BTR. This is a 40 MOA Rail. The Hybrid does not have a Bridge. This barrel is the Kukuri profile ARC High Rings with sunshade.Are you running a sunshade and the NV bridge? I have an MTU profile so I don't see why it wouldn't work on your gun.
I have a LH version in production now. I have NEVER looked forward to a rifle more than this one. Going all out top of the line on this build. Athlon Cronus, Cyke Bipod, Trigger Tech, MDT ACC Chassis and an integral Armtac suppressor.Ok, no more drip feeding, it's time for full fire hose.
The VGW V-22 is a true-to-scale mid-lock rimfire bolt action with integral recoil lug. One of the many unique features of this design is, for a mid-lock, there are no lug ways forward of the lug abutment in the receiver. The rail is MilStd 1913, available in 0, 25 and 30 MOA. The action is currently in full production and available from Vudoo Gun Works in St. George, UT.
This rifle has no finish on it yet and of course, it uses my AICS patterned magazine that is currently fielded in many 40X Repeater Conversions. The action is a direct drop in to any Rem700 Short Action Stock or Chassis, with the only accommodation being the ejection port is shorter than the standard Rem700/40X length port. Unlike the 40X Rimfire, the lugs in the VGW V-22 are concealed.
I'll be spending more time on the range tomorrow and will post video of it cycling, but it runs like a Swiss watch.
Thanks, Guys....
MB
What height scope rings for 56mm on a 40moa base?
I thought I wanted lower rings and I have completely switched around to higher. You can't see how low the adjustable cheek pieces are on these MPA chassis. For my large noggin I could not get comfortable on the lower rings, but others do.
What's your projected delivery time on the LH?I have a LH version in production now. I have NEVER looked forward to a rifle more than this one. Going all out top of the line on this build. Athlon Cronus, Cyke Bipod, Trigger Tech, MDT ACC Chassis and an integral Armtac suppressor.
I had that issue with the aluminum mag. New follower helped. Also making sure that rounds are stacked correctly like you said, no issues sinceDoes anyone have a fix for feeding issues with the magazine?
When I load up ten rounds I end up having issues with the nose of the round not being elevated enough to clear the front of the magazine.
I've disassembled and cleaned my polymer mag as well as bought a metal mag thinking that may alleviate the issue but both have the same problem. I've tried loading the magazines different ways to get the rounds to stack on each other correctly, but it seems like the only way to prevent it is to load it to 5 rounds.
Any tips?
Does anyone have a fix for feeding issues with the magazine?
When I load up ten rounds I end up having issues with the nose of the round not being elevated enough to clear the front of the magazine.
I've disassembled and cleaned my polymer mag as well as bought a metal mag thinking that may alleviate the issue but both have the same problem. I've tried loading the magazines different ways to get the rounds to stack on each other correctly, but it seems like the only way to prevent it is to load it to 5 rounds.
Any tips?
@SirDrinksAlot
I believe vudoo posted a video about this very topic. I hope this link helps;
Vudoo Blog
Stay informed about the latest developments in precision firearms and the firearms industry. Vudoo Gun Works' blog brings you insights, news, and updates curated by our expert team. Join us in exploring the world of precision shooting and innovation.vudoogunworks.com
Post a pic! I like the Vudoo green.Anyone have a pic of anything cerakoted “vudoo green”? Just got my vudoo and I’m not sure what color it is but I’m not loving it. Not sure if it’s worth emailing them about or not. I’d like to see what shade they sent me and what the other shade is first (they offer 2 shades of green but don’t have any example pics in the website)
I’ll take it off your handsAnyone have a pic of anything cerakoted “vudoo green”? Just got my vudoo and I’m not sure what color it is but I’m not loving it. Not sure if it’s worth emailing them about or not. I’d like to see what shade they sent me and what the other shade is first (they offer 2 shades of green but don’t have any example pics in the website)
Post a pic! I like the Vudoo green.
I don’t hate it. I’d just like to see what the other green they offer looks like before I go through the hassle of sending it back right after I waited 18 weeks to get it.Yeah, the second if what I remember, more pea soup ish, lol. Vudoo will probably make it right for you if you want, but I'd shoot the hell out of that matrix, it looks great as is with the greyish tone.