-
Having trouble using the site?
Contact support
Accuracy International AT-X
- Thread starter Peter Laurvick
- Start date
Do you have other pics with the 18" and suppressor ? Looks fantasticAccuracy International AT-X Black Universal Hinge Assembly Kit 29795BL
Accuracy International AT-X Black Universal Hinge Assembly Kit 29795BL For Salewww.eurooptic.com
18” barrel:
View attachment 7767479
Attachments
The 3mm standoffs worked perfectly with the countersunk screw hole, but I could not get enough torque using the 12mm (IIRC) head thumb screws to completely secure the riser... it still has a small amount of play in it. I think it might work fine if the head was shaped like a flat wing-head as opposed to a wheel, to allow for more torque to be applied.
I had looked at these, but was wanting to stick with steel screws. In one part of the description, it says they're iron, but further down it said something like nickle plated brass. Do you have any play left in the riser after tightening?
It's snug enough to eliminate play, I can't get enough thumb purchase to really torque down for the cheek rest (yes, I've pulled the LOP out so the QD cup is out of the way).
I just got those ones today and they have the same problem as the rest. Still a little play in the cheek riser.
Were you able to get the play out of the cheek riser cause I just got these exact ones today and still had play in the cheek riser.
Thanks here’s some crappy ones just now haven’t had much time to actually shoot.
It's juuuuuust snug enough to keep it from moving. I’d have to really yank on it to force up/down play. ZERO side-to-side play.Were you able to get the play out of the cheek riser cause I just got these exact ones today and still had play in the cheek riser.
Hmm. I can make my cheek riser secure but there is a little bit of slop/play in the front side of the riser where it wants to tilt forward and back a little bit. But with the factory screws there is zero play.
It's a temporary fix until I get the folder. I wonder why AI didn't go with a single screw for each adjustment.
My thoughts exactly. Figured it’s a $10 fix until they release the PSR stocks for them. I think they were trying to keep it very basic to meet a certain price point.
You guys sure are on a mission for tool-less adjustment. The folding hinge should really cure your issues.
um......the folding hinge makes the stock foldable, doesnt do anything to cure the tool-less adjustment issue. but like i said, it's only about $10 in screws. hahahah
Anyone know the story with these knobs...aftermarket?
The folder. It will fix that issue.
Why do you need tool-less adjustment for anything other than bolt removal?
Because maybe I share my rifle with my son and don’t wanna have to take 5 fucking minutes every time I hand it off to him to set it up right. Maybe I just want tool-less adjustment.
The folder. It will fix that issue.
Why do you need tool-less adjustment for anything other than bolt removal?
I don’t know but it looks like a slightly different stock too that is not the one that came on it. Possibly an early prototype?
It’s not a PSR stock either.
I don’t know but it looks like a slightly different stock too that is not the one that came on it. Possibly an early prototype?
It’s not a PSR stock either.
Ask @NoLegs24 he prolly has a couple laying around he's not using
Yeah I was gonna call his ass in here. Hahah. The shooter who’s rifle that is is also a pro sponsored shooter for AI so I’m sure he’s got the hook up. Has the hinge already on it too.Ask @NoLegs24 he prolly has a couple laying around he's not using
these look interesting ... https://www.aftfasteners.com/produc...al-thread-anthracite-10-pkg-k0274-904x15.html
Ask @NoLegs24 he prolly has a couple laying around he's not using
Nah, none of mine have those enhancements.
Don't really care for them anyhow. Not a fan of the knobs. They would get loosen over time on the AX's.
The Cam-Levers on the ASR/ AXSR is what you really want.
18" 308
Waiting on the bridge, top rail & weights.
This barrel has no flats, so hopefully it doesn't get stuck
or the tools will come out.
Waiting on the bridge, top rail & weights.
This barrel has no flats, so hopefully it doesn't get stuck
or the tools will come out.
My barrel also has no flats. I half Ass use a strap wrench on it. Or use the flats of the brake and hope it holds.
Does anyone know of a set of instructions for adjusting the competition trigger?
Looking to reduce the over-travel a bit.
Looking to reduce the over-travel a bit.
Should have been a small bag with the other trigger spring and instructions that came with the rifle.
Oh, yeah…all the stuff that got left in the box once the ‘HOLY SHIT it’s finally here’ set in.
You should also have a small flash drive with the user manual in PDF on it. That also has trigger adjustment info.
Merry Christmas to all AI users, supporters of AI and those who have yet to join the AI club.
We have shipped all but three of the first batch of production AT-X rifles to our distributors.
We will continue to ship the second production batch during January, February and March of 2022 and next year will be a good year for shipments of AI rifles, AICS and accessories.
Product updates will be announced at the Shot Show.
Tom Irwin
Accuracy International
We have shipped all but three of the first batch of production AT-X rifles to our distributors.
We will continue to ship the second production batch during January, February and March of 2022 and next year will be a good year for shipments of AI rifles, AICS and accessories.
Product updates will be announced at the Shot Show.
Tom Irwin
Accuracy International
Merry Christmas! Hoping for the AICS in 2022 so I can take one of my ATs and dropping in the new chassis.
