Accuracy International Picture Thread

[FUNCTIONAL]

Alright guys. Last help question I think.

I can get a hold of a thumbhole kit part no 26722. Says it works on me style skins and I'd cut the little nub to make it work on a folder.

Will this kit work on an AT rifle? I'm thinking yes but want to be 100% on it.

 

[VSP968]

 

[FUNCTIONAL]

View attachment 7771255

So you're sayin there's a chance? Lol

 

[VSP968]

Yup, use a razor saw and cut at the paring line. AT thumb hole molding same same for fixed and folding. Difference is the hinge. Cut on the line as shown.

 

[FUNCTIONAL]

Yup, use a razor saw and cut at the paring line. AT thumb hole molding same same for fixed and folding. Difference is the hinge. Cut on the line as shown.

And no difference between aics and AT rear end kits?

 

[VSP968]

No difference as long as it’s an AT kit.
26722 is a fixed stock thumbhole kit. Cut on the line for a folder.

These are not for sale. Do not PM me about these. They’re gone. This is an old picture. Note line on green fixed butt stock.

 

[FUNCTIONAL]

No difference as long as it’s an AT kit.
26722 is a fixed stock thumbhole kit.

That's what I'm asking if the 26722 is good on an AT. Nothing on the package or descriptions from retailers state if its specific to AT or aics. Just says for new skin type.

 

[SFree]

That's what I'm asking if the 26722 is good on an AT. Nothing on the package or descriptions from retailers state if its specific to AT or aics. Just says for new skin type.

Yes, the 26722 is for both folder and fixed, I have used the same stock sides….

 

[FUNCTIONAL]

Yes, the 26722 is for both folder and fixed, I have used the same stock sides….

That I got. Easy enough to cut the piece off.

Is it meant for an AICS stock or a full blown AT rifle? Is it interchangeable between both? That's the info I can't confirm.

 

[blbennett1288]

That I got. Easy enough to cut the piece off.

Is it meant for an AICS stock or a full blown AT rifle? Is it interchangeable between both? That's the info I can't confirm.

Email [email protected] and ask. That way you’ll have it directly from the horses mouth.

 

[FUNCTIONAL]

Email [email protected] and ask. That way you’ll have it directly from the horses mouth.

Historically I've never had luck talking to manufacturers lol. I emailed them but Euro is my next call.

 

[blbennett1288]

Historically I've never had luck talking to manufacturers lol. I emailed them but Euro is my next call.

AINA is quick. Typically same or next day response.

 

[samb300]

 

[rope]

View attachment 7773121View attachment 7773122View attachment 7773123

What's going on here? I have the shelf sitting in my cart...

EDIT...found the other thread...In for one in PB and a podcast trigger shoe!

 

[RS14]

View attachment 7773121View attachment 7773122View attachment 7773123

When and how much???

 

[samb300]

When and how much???

https://www.snipershide.com/shooting/threads/ai-ax308-grip-mods.6806265/page-6

 

[jbuck88]

Just curious. Is anyone getting extractor marks on their AXSR while reloading? I seem to be getting some extractor marks early in the pressure curve without any other indicators. I had my sfp ax308 have a issue with the ejector that needed send back for is the reason I'm asking. It's a factory 338LM rifle if it matters and I'm seeing marks from the extractor 3-5 grains less then any ejector or primer indicators.

 

[Sleeman]

 

[Tim Brush]

At last, both of my AIs are complete:
- AXMC recently re-cerokoted FMJ firearms @walkabout and with the GTAC grip conversion by @Cheetor and
- AT with some awesome @samb300 accessories

 

[khymiller2]

At last, both of my AIs are complete:
- AXMC recently re-cerokoted FMJ firearms @walkabout and with the GTAC grip conversion by @Cheetor and
- AT with some awesome @samb300 accessories

Is that Elite sand? What is the original color?

 

[Tim Brush]

Is that Elite sand? What is the original color?

Colour matched to AI pale brown - just bad lighting

 

[wichitaguns]

Colour matched to AI pale brown - just bad lighting

Nice. That is kind of like the 2 gun battery I am after. With the difference being an AXMC(saving up now and hoping to buy in june) and an AE MK11.

 

[bfk4lyfe]

Was pumped for my first range trip in about two months. Got 10 rounds off then the fog rolled in…bleh.

 

[EOD100]

This started out as a single shot AI target rifle.
Action was milled for Magwell and safety
Built back up as an L96A1 clone
Cerakoted Highland Green
AI pattern 6x42 green S&B

 

[EOD100]

2017 AT with thumbhole stock
16" .308 barrel
ASE Ultra SL5 Mod
3-15x Steiner

 

[Krob95]

Now that's pretty damn cool!

 

[Krob95]

Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

 

[hafejd30]

Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

My 1:12 LW 20” loves 178 ELDX. I would think 175 FGMM would be great as well

 

[Krob95]

Good deal, I may just do that then. Saves me having to work up a load lol

 

[ballisticdaddy]

Nice winter day in Colorado so had to get out and enjoy it with the 6.5x47

 

[Eurodriver]

Did some shooting today. Finally stopped raining.

Really want a thumbhole skin for this. (Any pointers?)

Still waiting on the Sawtooth arca rail to ship, then I just need to get a couple different barrels and a ZCO and then an AX and then an AT-X…

 

[FUNCTIONAL]

Did some shooting today. Finally stopped raining.

Really want a thumbhole skin for this. (Any pointers?)

Still waiting on the Sawtooth arca rail to ship, then I just need to get a couple different barrels and a ZCO and then an AX and then an AT-X…

View attachment 7778832

Sell that mp5 hiding up there and you could just about buy all that in one shot lol

 

[Huskydriver]

pulled the 308 stick out cuz why not....

Digging these new ridge precision tripod leg covers

 

[Darkside-Six]

Sell that mp5 hiding up there and you could just about buy all that in one shot lol

You never ever sell an MP5.

 

[bfk4lyfe]

Did some shooting today. Finally stopped raining.

Really want a thumbhole skin for this. (Any pointers?)

Still waiting on the Sawtooth arca rail to ship, then I just need to get a couple different barrels and a ZCO and then an AX and then an AT-X…

View attachment 7778832

Sporting services in England. About $100 shipped.

 

[Diesel65]

 

[deersniper]

 

[Diesel65]

Home on my range with the 300WM

 

[FUNCTIONAL]

Sporting services in England. About $100 shipped.

Thank you for this. Just ordered a PB kit. Had a black kit a buddy was going to give up but wouldn't have matched.

 

[bfk4lyfe]

Thank you for this. Just ordered a PB kit. Had a black kit a buddy was going to give up but wouldn't have matched.

No problem. If any lefties are reading this, you can order one thru them and AI will make it (I think the only difference is the cut out for the folder knob securer gizmo tho). See my pic a few posts up.

 

[bfk4lyfe]

Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

If the lothar barrel is the 'factory' one, my 24" 1:12 shoots it lights out, i just wish it were threaded, gr...

 

[BuLLet]

Burt, is that your close combat config? 50 BMG does everything now!

View attachment 7778932

 

[Luvman]

Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

I no longer have a 20LW barrel but the one I had shot well with 175FGMM. The first 5shot group I ever shot with it was with 175 FGMM and is pictured

 

[Eurodriver]

View attachment 7778000View attachment 7777998

Was pumped for my first range trip in about two months. Got 10 rounds off then the fog rolled in…bleh.

Beautiful! Thanks for the link. Ordered a thumbhole skin. Can’t wait to get it. In my mind an AT isn’t complete without a thumbhole!

Sell that mp5 hiding up there and you could just about buy all that in one shot lol

Lol it took too long to get to sell!

 

[Sako man]

View attachment 7716844
Playing hooky from work.

Somewhere in Cali?

 

[bfk4lyfe]

Somewhere in Cali?

Yup, Bay Area.

 

[Serpico1985]

Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

This is with my 17.850” factory 1/12 308 barrel. I’d say it shoots it well.

 

[Hondo23]

View attachment 7779843

This is with my 17.850” factory 1/12 308 barrel. I’d say it shoots it well.

My 16" loves 168's and 175's factory ammo. Haven't done any load development with it yet.

 

[jim_halpert]

Excuse the garbage phone pic.
Arca rail on, barrel chopped to 22" and rethreaded for suppressor (fingers crossed that arrives tomorrow.)

 

[Randall3rd]

Here’s my AIAT in Sage Green on the first trip to the range.