• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Accuracy International Picture Thread

1DF467DD-89E6-4592-BF43-C7F6262C0430.jpeg
 
Thank you for this. Just ordered a PB kit. Had a black kit a buddy was going to give up but wouldn't have matched.


No problem. If any lefties are reading this, you can order one thru them and AI will make it (I think the only difference is the cut out for the folder knob securer gizmo tho). See my pic a few posts up.
 
Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?

If the lothar barrel is the 'factory' one, my 24" 1:12 shoots it lights out, i just wish it were threaded, gr...
 
  • Like
Reactions: Krob95
Question for you folks that have 20" 1:12tw lothar 308 barrels. How do they like FGMM 175's? Half tempted to buy a case and shoot that next month at Raton. I think the furtherest target is 890yds?
I no longer have a 20LW barrel but the one I had shot well with 175FGMM. The first 5shot group I ever shot with it was with 175 FGMM and is pictured
 

Attachments

  • 48241C8F-6825-4A60-9E5F-964A53E85650.jpeg
    48241C8F-6825-4A60-9E5F-964A53E85650.jpeg
    533 KB · Views: 44
Got the AXSR chassis finished up. Had to go with a 16" top rail and chop the action rail a little to get it to fit. Not perfectly flush but damn close. Small 1/8" or so gap. Could have gotten it perfect but I was impatient.
 

Attachments

  • 7217D94C-0822-4846-9755-4837B717079B.jpeg
    7217D94C-0822-4846-9755-4837B717079B.jpeg
    326.6 KB · Views: 146
Got the AXSR chassis finished up. Had to go with a 16" top rail and chop the action rail a little to get it to fit. Not perfectly flush but damn close. Small 1/8" or so gap. Could have gotten it perfect but I was impatient.
What is the action and rail you order?
 
What is the action and rail you order?
I did 0 moa as the 20MOA action rail is OOS everywhere.

Action rail 20062
Forend rail 25833

Chopped about 2.5 rail sections off the action rail as it was the cheaper of the two. Then had it cerakoted H250.
 
New AXLE in 6.5 Creedmoore. Getting the scope zeroed.
Using factory Hornady 147gr. TAP It was a ragged hole at 100yds.
 

Attachments

  • 5E304016-BA4A-4CD9-81F5-C186D93E3C8D.jpeg
    5E304016-BA4A-4CD9-81F5-C186D93E3C8D.jpeg
    605.3 KB · Views: 221
  • 33CF2D4C-C311-4825-8792-28A2876AF4C2.jpeg
    33CF2D4C-C311-4825-8792-28A2876AF4C2.jpeg
    553.8 KB · Views: 222
  • DF2D5D5A-A231-4366-9794-113085F7B43B.jpeg
    DF2D5D5A-A231-4366-9794-113085F7B43B.jpeg
    697.1 KB · Views: 221
I'm assuming it has to do with keeping the 3pos safety and upgrading the handguns to the arca style. Kinda a Mashup of the axmc and axsr. Same as the AT LE was a combo of the AT and AX.

Again. That's just my guess.
 
Well I've only seen the AXLE in the two tone AXMC setup with the AXSR forend. But maybe they had a demand for the SA's too and are phasing out the ATLE?
 
Well I've only seen the AXLE in the two tone AXMC setup with the AXSR forend. But maybe they had a demand for the SA's too and are phasing out the ATLE?

Different action lengths. The ax Le is just a axmc rebranded with a 20 moa top rail and a axsr handguard.
 
@Huskdriver, no it’s an LE rifle from MH.

Yeah wasn't paying attention and making some assumptions. Last I checked the LE guns were only axmcs and at's with a ax buttstock so obviously AI is doing some other LE offering I wasn't aware of. Good looking set up though👍.

Wonder if this means the at will finally be getting dropped.
 
Yeah wasn't paying attention and making some assumptions. Last I checked the LE guns were only axmcs and at's with a ax buttstock so obviously AI is doing some other LE offering I wasn't aware of. Good looking set up though👍.

Wonder if this means the at will finally be getting dropped.

Hopefully they don't drop the AT. To get into an AI the AT is the more attractive price vs shelling out a few grand more for an AX or AXMC. I feel those on the fence between an AI and custom would jump in for AT costs vs 8k for the AX. If they do id like to see the sales numbers overall for AI, have a feeling they would go down.