Recent content by ROUGH

Re: Jackets - I Need One! I wear carhartt outer wear, tough gear. I have this jacket linked. http://www.carhartt.com/webapp/wcs/store...ategoryId=10928

Re: Bedding a 20moa base?? I took my action out of the stock to remove stress from the receiver, then mounted the barrrel in a padded vice, I used the front screw to mount the base as the receiver is round in this area it naturally centers the base with the action. I used brownells release...

Re: Where to get raw thread protector stock Fulton armory has them not sure what the O.D. is here id the description from there "Upper Receiver Parts Page" "Barrel Muzzle Thread Protector, 5/8"x24tpi, Steel, Parkerized Knurled To Allow Fast Installation and Removal" ($17.95 + shipping)

Re: fixed blade knife vote 2 things to think about with those 2 knives boker, im sure it is a good knife but being double edge you will have no place to put your thumb for spine pressure if you are doing detailed carving of any type & if you need it to split wood in a pinch & need to use a...

Re: POF issues in SLC....help yep just like mine was, mine had more bullet contact with the upper on the left side feedramp as well. It looks as though the feedramps are set back like the M4 type, maybe some light filing with a fine jewelers file would help? (don't attempt this unless you...

Re: POF issues in SLC....help <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sobrbiker883</div><div class="ubbcode-body">Yup, so when folks say <span style="font-weight: bold">"hand cycle"</span> I would suggest locking the bolt back each time and using the bolt...

Re: POF issues in SLC....help please do hand cycle it & measure the overall length of the rounds before & after, this will give an indication of setback if it is occuring. also look at the nose of the round, as mine were getting deformed upon feeding. again this was just my experience i did...

Re: POF issues in SLC....help <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sobrbiker883</div><div class="ubbcode-body">ROUGH's input is an upper issue, and Wu's uppers were running fine on a different POF lower. I gotta say its a little perplexing. How is the...

Re: Bedding an AICS ? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Scott_at_Vortex</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: ROUGH</div><div class="ubbcode-body">I ended up bedding mine, because...

Re: Bedding an AICS ? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sobrbiker883</div><div class="ubbcode-body">Interesting angle on bedding....I like the logic. </div></div> thanks I just felt the stock will stick around longer than the action.

Re: Bedding an AICS ? I ended up bedding mine, because when the front bolt was torqued there was some upward movement in the rear tang when it was torqued. I did mine a little different some of you may freak but it has worked out great for me. I actually reverse bedded it, the marine tex is...

Re: Avoiding Ring Marks if the base is bedded with no stress in it then a matched pair of rings will be in perfect alignment and no ring marks will be present. my NF is mounted in seekins rings on a badger base I removed it the other day and no marks were present.

Re: Why the AICS? likes? -it is tough as hell -if a skin is damaged it can be easly replaced -color changes are easy -adjustable cheek riser can be canted left to right as well as up and down -i just added the adjustable but pad for it adjusts for cant as well as up/down -easy to maintain...

Re: POF issues in SLC....help check if the bullet tips are hitting just below the feed ramps i had this happen with a dpms, it turns out that the face of the upper receiver just below the feedramps was chipping the tips of the rounds as well as setting back the rounds in the cases at varying...

Re: strider sng I had one, but my hand is too big for it, I went for the smf & found some things about it i didn't like, so i went for the ZT-301 & have had it for about 2 years and havent found myself looking for another folder since. strider makes a great product, but it just wasnt for me.