Recent content by toddk

Re: Model seven <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: dontstrokeme</div><div class="ubbcode-body">Can a Model 7 use M700 ADL trigger guards? If I were to order a Manners inlet topside for a Model 7, forward bottom hole drilled for Model 7, and rear two...

Re: Serious trouble with AR-15 <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Mikee Booshay</div><div class="ubbcode-body">the rifle can ( but normally won't)fire out of battery ie the bolt not fully locked.</div></div> The firing pin won't stick out the bolt...

Re: who make a pistol AR lower..... Stripped lowers are transferred as "other" and can be built as a rifle or pistol if it's never been built as a rifle.

Re: front sight on flattop ar can be seen in my scope If you focus on the target and not the front sight you won't even notice it. You might want to shoot it a few times before you get to cutting the front sight off.

Re: Gas block installation The best way to keep it from moving is to pin it like a front sight.

Re: Noveske AR-10 Armalite barrels will fit in the DPMS receiver. The threads limit the interchange of barrel nuts and handguards with proprietary barrel nuts but have nothing to do with the barrel extension fitting into the receiver. Headspace and the length of the lugs may be an issue, as...

Re: Armalite barrel w/ DPMS upper? There is a significant difference in the buffers and springs used. The gas port should be different because of this. I would use the Armalite barrel, BCG, buffer, spring, and buffer tube (if carbine, rifle is the same).

Re: Threading a barrel without can Use a gunsmith that knows something about tolerances and can thread to 2A/3A and gauge it. I want my next can/brake/flash hider to fit, if I want it tighter I'll bring the can and ask for it tight. Not threading to 2A/3A if the customer asks means one of...

Re: Please Watch.Helihunting New Zealand. Help Sto <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Kurt</div><div class="ubbcode-body">if you have no seasons and hunt year round sounds like you have no idea what game management is. </div></div> That may be...

Re: Custom AR-10 Lower and m110 magazines The AR-10 upper has a shelf to limit the seating depth of the AR-10 mag. The shelf does not allow SR-25 mags to seat even if the lower is for the SR-25 mags.

Re: Who makes the Rem 6.8 light tactical rifle stock The light varmint and 6.8 tactical had fluted magnum contour barrels I believe, not sporter and had a nice balance.

Re: Who makes the Rem 6.8 light tactical rifle stock <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Pointblank4445</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: TMK</div><div class="ubbcode-body">I...

Re: KABOOM ! High primers or debris on the bolt face are not firing OOB they are slamfires OOB. Just because the hammer drops does not mean firing OOB is possible. Pull your BCG and hold the firing pin forward, then push the bolt to the rear, the firing pin will not protrude from the bolt...

Re: Who makes the Rem 6.8 light tactical rifle stock I think it was a B&C, never seen an R3 pad on a HS.

Re: AR-10 buffer The DPMS LR uses a shorter buffer than the AR-15.