Search results

Search the forum Search Articles
  1. H

    Night Vision Vortex Impact 4000 Rifle/Rail mounted Range finder???

    When does the wind and weather info get updated when paired with a Kestrel weather station? I have the Kestrel 5500 with a vane setup to feed wind and weather info into GeoBallistics. From the manual I see where you can update the wind info from within the GB app. Is there a way to pull updated...
  2. H

    Powder IN-STOCK thread

    Precision Reloading has 15% off on some primers. CCI 450 for $84. $80 if you buy 5.
  3. H

    Ingenuity Precision trickler

    The Powder System page was recently updated: To me it sounds like a shipping date in May/June for the first round of preorders since the estimate for the second round is late Summer.
  4. H

    Night Vision Vortex Impact 4000 Rifle/Rail mounted Range finder???

    First range trip, worked flawlessly. No issues with recoil. First 5 shots on the orange at 500 yards. Vortex solution given was 2.06 Mils up so dialed in 2.1. First shot was a little high. Dialed down to 2.0 and it started hammering. Wind was fairly high at 20 - 25 MPH so not too shabby!
  5. H

    Night Vision Vortex Impact 4000 Rifle/Rail mounted Range finder???

    Got the new KeepPower 16340 950 mAh battery in. It is a bit shorter than the Panasonic that came with the Impact 4000, but I still only get just over 1 thread of cap engagement with it. Turns out there is only about one thread of engagement even with no battery in the compartment. :rolleyes...
  6. H

    Night Vision Vortex Impact 4000 Rifle/Rail mounted Range finder???

    FYI on batteries. I tried the Orbtronic 800 mAh rechargeable battery which is 35.65 mm in length and it does sort of fit, but only has just under one thread of cap engagement. The Panasonic battery that came in the box is a bit better, but still only has a little more than one thread of...
  7. H

    POWDER DISPENSER ADVICE.

    The top video (F-Class John) on the product page should answer most if not all your questions. I don't want to sidetrack this any further out of respect for the OP's question. I'm not even sure he is interested in this product. There is another thread here that has most if not all the info on...
  8. H

    POWDER DISPENSER ADVICE.

    I don't think it matters. Mine usually throws 1 kernel under, but occasionally goes 1 over. The little bit it trickles when the powder is dropped is insignificant. I can set it to trickle slower near the end of the charge and it will almost always be .02 gr under, but I wanted to keep the speed.
  9. H

    POWDER DISPENSER ADVICE.

    It does.
  10. H

    POWDER DISPENSER ADVICE.

    Thing is the IP trickler is a proven performer. The IP powder dropper doesn't have to be super accurate just in the ballpark. What I'm really looking forward to is the trickler controller that will come with the IP dropper. From what is shown in the video previews it is accurate down to a single...
  11. H

    POWDER DISPENSER ADVICE.

    OR if you can afford to wait 1 to ??? months, the Ingenuity Powder System is on preorder now. http://ingenuityprecision.com/product/ingenuity-powder-system/
  12. H

    Factory Hornady 300prc 225 eldm coal

    Last batch I had overall length was 3.670.
  13. H

    Coup De Grâce, New Action from American Rifle Company, $899 WOW!

    Thank you for figuring this out! I suspected it was something along those lines. It appears there is room to move the magazine back in relation to the chassis and still have it feed correctly. If I recall correctly when I used the Hornady factory 300 PRC 225 gr match ammo to break in the barrel...
  14. H

    Coup De Grâce, New Action from American Rifle Company, $899 WOW!

    https://xlrindustries.com/products/long-action-3-850-30-06-aics-box-magazine-1
  15. H

    Coup De Grâce, New Action from American Rifle Company, $899 WOW!

    I'm using a CDG LA chambered for 300 PRC in an MDT ACC chassis and if I load the cartridge to mag length it won't feed. The nose of the bullet hits the bottom of the action so it can't rise up into the action to feed. An earlier poster in this thread posted pictures clearly showing the issue...
  16. H

    Coup De Grâce, New Action from American Rifle Company, $899 WOW!

    I had similar issues with 300 PRC with CCI 200s and ADG brass. I was originally seating the primers .010" below flush and had some failures to fire (15%) even with multiple attempts. I believe I was crushing the primers too much and they just wouldn't ignite. After disassembling the dud rounds I...
  17. H

    AMP really worth the extra $$$$$$

    That's a shame about that one flier! ;)
  18. H

    What did you do in the reloading room today?

    Not gun related, but since I have limited space it's my workspace for other things as well. That is a twist lock thumb insert for a bowling ball. ;)
  19. H

    Ingenuity Precision trickler

    Guess I'll just have to "suffer" with the V3 + IP trickler until the IP dropper ships. :whistle:
  20. H

    What did you do in the reloading room today?

    Made this:
Top Bottom
Back
Home
Forums
Merch
Alerts