• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

Search results

  1. Furner

    CMMMG Upper

    Re: CMMMG Upper I have had them before and they were always high quality and good people to work with.
  2. Furner

    700 SPS Tactical as first gun?

    Re: 700 SPS Tactical as first gun? I bought one and I really like it so far. I immediately upgraded to a B&C stock, when you sell the factory stock it ends up being only like a $120 cost to upgrade.
  3. Furner

    Keeping 3/8" .22 rings from slipping?

    Re: Keeping 3/8" .22 rings from slipping? Also, I just measured my rifle and the grooves ARE 11mm not 3/8"
  4. Furner

    Keeping 3/8" .22 rings from slipping?

    Re: Keeping 3/8" .22 rings from slipping? I got some Warne steel rings with reversible clamping pieces from Brownells. I put them on with some 1" bar stock and beat the butt of the rifle on the ground a few times and the rings had no movement at all. I think these will do. EDIT: These rings...
  5. Furner

    Yardsale Score--USMC Rock Island 03!!

    Re: Yardsale Score--USMC Rock Island 03!! seriously........seriously????
  6. Furner

    Gunsmithing Xmark tune up

    Re: Xmark tune up nice. i might try that, my x-mark is running out of spring length.
  7. Furner

    Gunsmithing Bore Guide AI AWM

    Re: Bore Guide AI AWM I have excellent luck contacting him via email.
  8. Furner

    Moving with firearms questions.

    Re: Moving with firearms questions. Just make sure you know any state-specific laws in Oregon.
  9. Furner

    Keeping 3/8" .22 rings from slipping?

    Re: Keeping 3/8" .22 rings from slipping? what about this: http://www.brownells.com/aspx/ns/store/P...EAVER%20ADAPTER
  10. Furner

    Roscoe built Surgeon 308

    Re: Roscoe built Surgeon 308 nice bolt knob. Did that come with the action or somewhere else?
  11. Furner

    Keeping 3/8" .22 rings from slipping?

    Re: Keeping 3/8" .22 rings from slipping? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Furner</div><div class="ubbcode-body">So those have a...
  12. Furner

    Keeping 3/8" .22 rings from slipping?

    Re: Keeping 3/8" .22 rings from slipping? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: bohem</div><div class="ubbcode-body">I had the same problem with a 10/22 that had cheapo rings on it. Make sure that the rings don't have something caught in the clamping...
  13. Furner

    Keeping 3/8" .22 rings from slipping?

    Ok, so I have a Marlin 795 that I decided to start training on because I am pretty much broke, have a ton of .22lr, and a membership to a nice range. I put a BSA Sweet 22 scope on the rifle, using I believe Millet rings. The rifle has the 3/8" rail that a lot of .22 rifles have. I have put...
  14. Furner

    Rifle Scopes Okay for an entry level 10/22 Scope???

    Re: Okay for an entry level 10/22 Scope??? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: tansinator</div><div class="ubbcode-body">Don't knock it till you try it. I bought a BSA Sweet 22 for my Annie, 6-18x40mm.The turrets are spot on with a zero at 50yrds when...
  15. Furner

    Gunsmithing Removing a live round from chamber when extractor

    Re: Removing a live round from chamber when extractor <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: The Mechanic</div><div class="ubbcode-body">might also try a little R12 freon down the tube. First put it into a Styrofoam cup then down the barrel the freezing...
  16. Furner

    Gunsmithing Measuring legal over all length?

    Re: Measuring legal over all length? <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: sobrbiker883</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Norcal Phoenix</div><div class="ubbcode-body"> The last...
  17. Furner

    Gunsmithing Measuring legal over all length?

    Re: Measuring legal over all length? In short, either solder that melts at 1100 degrees F or higher, or a weld that runs at least half the way around the muzzle device, or 4 equally spaced tack welds. The letter is in regards to an AR-15, and is old, but to my knowledge the requirements have...
  18. Furner

    Lousiana Precision?

    Re: Lousiana Precision? Not only does it look like he builds good rifles, I think he stepped up and helped out a member who got a bad rifle from another builder (who does not advertise here)
  19. Furner

    Your sniping rig

    Re: Your sniping rig <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: inspcalahan</div><div class="ubbcode-body">Surprised at the lack of photos on here. Here's my humble offering - Knights MK11, Eberlestock Phantom G4 and all the stuffing like raingear, hide...
  20. Furner

    Rifle Scopes US Optics factory (pics- more!)....

    Re: US Optics factory (pics- more!).... <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: M.45</div><div class="ubbcode-body"><div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Nom de Guerre</div><div class="ubbcode-body">BTW, M.45, now...