Search results

Sorry fella's for the headaches. I've taken your replies to heart and believe we've solved the problem. Last spring we shortened our follower springs on the 5 round mags hoping to make loading the mags easier for the end-user. Unfortunately, this came back and bit me in the ass on some of the...

Re: Wyatt's Outdoors Det Magazine vs Badger Ordinance Just for the record, we supported the Sacramento Tactical match last spring with a donation. We've always supported our troops and have paid our price in the military. I've personally supported the shooting sports for 45 years as a...

Re: Most economical way to allow for longer coals? The boxes come with instructions, or you can view the instructions at www.wyattsoutdoor.com and click on the magazine box link.

Re: Which DBM require no fitting? Here's our site: www.wyattsoutdoor.com Thanks to all for using our products. Kevin

Re: Requesting Reports of Experience w/ Wyatt 308 DBM Call Wade at B&C stocks. He's using one.

Re: Remington 700 detachable mag conversion The long action version we're working on will be the same configueration as the short we're doing, no alterations to the receiver will be needed. It will be as close to a drop in as we can get. We're increasing the thickness of the mag bodies to...

Re: FNH 300 wsm and Winchester Long action bolts? Todd, If you still have problems figureing it out, give me a call on tuesday. Kevin 541-776-8417

Re: FNH 300 wsm and Winchester Long action bolts? Yes, the receiver, bolt stop, and ejector must be altered to use the extended box if it's the controlled round feed. If it's a push feed Win., the receiver and bolt stop need to be modified. The island of metal on the receiver where the center...

Re: I @$#*&ed UP! 65Joe, Make sure that the person you take it to knows what he's doing. Removing the barrel is a good idea as long as your action doesn't have a claw extractor. If it does, you'll be buying more than just a bolt!

Re: Installing a Wyatts extendd box in a Model 70 Win Todd, Call me either today or Tues. I've been elk hunting and out of the shop since the 16th. Thanks, Kevin Wyatt

Re: New 6.5x47 Build I would have liked to shoot it more, but it's a customers rifle I just finished. Now he's the one shooting the crap out of it!

Stiller Predator action Krieger Stainless barrel Manners T4-A stock Wyatt's DetMag system w/ 5 round mag Stiller 20 min. pic rail Leupold Mk4 Cerakote throughout 1st group after break in

Re: Soft primers/easy slam fire? I suppose that this reply will show age on my part, but here goes. I carry a scar on my right palm from 13 stitches due to a slam fire back in the 80's. The rifle was a Match Grade M-1 Garand. Shooting NRA highpower requires 22 shots slow fire from 200 yds in...

Re: Remington 700 problems I'll put my money on the chamber being rough. It only takes minute pitting in the chamber to cause the problem you describe. Inspect your fired cases in good lighting, if you see any machine marks or burnished looking surfaces, there's your problem.

Re: Barrel Threading question? Forgot to mention, if changed to a Win or Ruger, the counter bore will be changed or eliminated.

Re: Barrel Threading question? Yes, the thread is the same. 1.062"x16. The counter bore is a tad different, but can be changed to fit a Rem. Also, the thread tenon can be turned down to fit a Win. M-70 or Ruger M-77.

Re: question about remington 1100 not cycling Check your 1100 to see if it's a magnum. The magnum barrels have 1 gas port, the 2 3/4" have 2. The magnum guns will not run light loads without modification. If it's a magnum barrel, the gas orifice can be opened up to allow operation of 2 3/4"...

Re: SKS slam fires? I've got a scar in the palm of my right hand from 13 stitches and a Garand slam fire that happened some years back. The cause was a floating firing pin and soft primer cups. About a year after this happened, Federal thickened their primer cups. I personally saw the slam...

Re: Manners or McM? I've built a number of rifles on both. Manners gets my nod. Quality and attention to detail have been superb on stocks I've used.

Re: WSM/WSSM ? Be carefull of the change. Getting the WSSM to feed properly can be tricky. If they keep shortening the ctg. cases, very soon we'll be trying to feed round balls out of a magazine box!