Search results

If that is a current picture it looks like it is still under power, have the owner take it through it's cycle and listen to it run. Then that and price should give you a good idea of ""Deal or Not a Deal".

Thank You All for your help in your answers. I was pretty sure it would at least by the numbers, confirmation is always a plus. Great Labor Day Weekend to all. jaclthr

Hello All, Not sure where this would go, so I'm starting here. On an AR 308 Precision Rifle platform shooting 175 SMK's @ about 2600 - 2650 FPS do you believe this would work for shooting steel out to 800 meters? Thanks jaclthr

I have reamers from PTG, JGS and Henrikson and I stay with them since their design is the same and all my bushings interchange using a screw to hold them on. Clymer and Manson reamers are identical types using a small "C" clip to hold the bushing on. I prefer to mess with the screw other than...

Devcon Steel Putty 10110 is my primary. I have some Marine Tex as backup but prefer the Devcon.

Beautiful work to say the least, Great detail. I hope you have a very successful hunt.

If it is from too much spring tension causing the plunger to push the case against the chamber you could push out the keeper pin in the bolt for the ejector and remove the spring, cut off a coil or 2 and replace. See if that will help. If you cut off too much a new spring is only a 2 bucks...

OOPS ! ! They are both GI's I guess since I built them on DPMS upper & lower sets from a couple of years back, 1 is a 22" precision DPMS setup with a 12 twist Bartlein chambered for 175 gn SMK and the other is a 16", 10 twist with the Brux barrel turned down to minimum diameter under the...

I have 2 DPMS .308's and have fired rapid fire on pig hunts and slow fire at the range with no problems using Pmags and DPMS Mags as well. I know the Pmags are GIII's. I just received 3 of the 25 rd. to see if they will clear on a prone setup to use on pig hunts as well.

Have you tried sitting down with this gunsmith and ask him what is done for this price or what all are you asking him to do? If you have concerns you should be able to sit down and talk it over, that would be part of getting to know a guy and starting a working relationship at this shop. It...

I torque my barrel nut extension on to the barrel to 100 ft.pounds and then drill into the threads and pin in place. The pin and nut can still be removed if need be but it won't turn off and this has worked well in .223 and .308 gas gun builds.

I agree with jonaddis84, cut the barrel and go with 3/4 - 24. It would be stronger for a heavier can and give more metal around the bore.

Hello Sir, If it isn't costing you anything to keep it then why not? It is like money in the bank(or safe), it isn't going down in value and if a real need comes along then you have this to sell and get started with. Until then you have a quality back up shooter if that need arises. I...

Hello Sir, It appears to be a "Match Rifle" configuration to shoot the NRA National Match Course of fire, 200 yd Standing Slowfire, 200yd Sitting Rapid, 300 yd Prone Rapid, 600 yd Slowfire Prone and the Longrange or Palma course of 800,900 and 1000 yd Slowfire Prone Matches. The front...

The Pre - 64 Model 70 is not the same bolt spacing as the Post - 64's. I talked to the people at PT&G and they told me theirs would not fit a Pre - 64, they are working on a new DBM that might fit but not sure when they will be out. I looked at CDI web site and their list is the same. They show...

Hello All, Do you know of anyone who makes a DBM for the Win. Pre-64 Model 70? Appreciate any help. jaclthr

Thank You to All that helped, the chipping is what I had heard about but after this I have a take off laying around I am going to try it on. ADCO was a huge help. Thanks Again jaclthr

Hello All, Is it possible to cut and re-crown a chrome lined barrel without the chrome breaking or flaking out ? Thanks jaclthr

Thank You for the link, I have sent him an e-mail for purchase. . . . jaclthr

Does anyone make a rear entry action wrench for a Sako TRG-21? Thanks jaclthr