Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
I would probably go with the 11.25. I have a 24” Rock Creek 11.25 5R. It shoots 168 and 175’s under 1/2” everyday and 1/4” most days. We are currently looking into over penetration issues and terminal ballistics. GMM’s are accurate no doubt. We are testing the 110 tap Ammo. And in testing we...
With 155 berger hybrid targets, running around 3,020 fps ive shot 6" plates at a grand. The problem with this is the 30 cal round is a sailboat and I was somewhere around 1.75 mil hold on the wind and 8.9 mils elevation. With the 308 it is doable but there are better choices out there like the...
Re: Should I strip this rifle and use the receiver? That action will be fine and the only reason to go with another action is if you are going full tilt custom. That action will true up great and if you want to go one step further purchase a over size bolt from ptg and have the raceways...
Re: Double tapping (the bad way) This discribed method of trigger pull that everyone is suggesting is how I shoot ever gun I own, handguns to shotguns to rifles. As of this date it is the most accurate method I have found. When firing semi autos there is no way the gun will fire again until...
Re: It is not going to be pretty when its done <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: Jig Stick</div><div class="ubbcode-body">If it drives tacks, who cares wtf it looks like. Ive had guys using reworked savages give me and my $5000 custom a run for the...
Re: rem 7005r The one I shot, shot very well I thought. My buddy purchased one in 308 24"and I got a chance to run it. At the time he had plain old remington corelocks and I shot between a half and quarter moa five shot group with it. With corelocks!!! I would have lost that bet, but I was...
Re: need to get started Also look up louisiana precision rifles and check out William Roscoe's web site. He has a lot of information about what goes into getting precision accuracy out of a bolt gun. If you end up purchasing a custom rifle in the future I would give him a shot at your...
Re: need to get started I've got at LA Precision 308 and 260. I shoot berger hybrid target 155s in my 308 when I run it in a match. This summer with the heat down here I was getting 3,021 avfps which got me to a grand at 7.8 mils., pretty good out of a sail boat. The thing you are going to...
Re: Value of boush&lamb 10x40 Yea it has been a good scope and still is. The thing about it is I just replaced the f1 on my comp rifle with the s&b msr so the f1 is going on the working rifle which means the Boush&Lamb is coming off. Problem I don't know if it would be worth trying to pass...
Boush&lamb tactical 10x40 mildot reticle 1/4 moa adj. I purchased this scope new years ago can not remember the year. I believe I paid right at $1,100 for it back then. I am curious what it would be worth now? Thanks
Re: 308 vld question The groups opened up and the fps were slower. Huh I figured coming off the lands would gain mv. Going to pull the seating out .020 and see if it will feed in the rifle. Looks like the vlds want to be closer to the lands.
Re: 308 vld question In the lands at 2.899 40 gr varget ave fps 2536 5 shot group .270 center to center. It fit in the mag fine but the tip of the bullet hitting the feed ramp. 43 gr 5 shot group .382 center to center ave fps 2706. Seating the next lot .040 deeper with the oal of 2.855. This...
I'm going to be working up a load for a friend with 175 vld hunting bullets. I have read that they need to be seated in the lands. The rifle is a 308 11.24, 24" rock with a bisley match camber so getting to the lands and keeping them in the mag wont be a problem. I have had good luck with varget...
Re: Bubble level too close for comfort.. Need advice <div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: JJ79</div><div class="ubbcode-body">Yes, considering where it is mounted by the ring where the scope will not flex...any clearance is enough clearance </div></div>...
Re: Leupold mark 4 reticle problem +1 on the Parallax/focas. If this scope it a side parallax model then there is two things you can check. You have a focas on the eye piece of the scope, this focuses the reticle to your eye. Focas this to the users eye so that when they focas their eye on...
Re: Weaver EMDR or PST 6-24 Cs tactical has some in stock I believe if not there is several forsale in the hide classified. Saw one for $700 something with to rings. They sale quick.