Search results

I have a fulton armory in 6.5 creedmoor and have always has ejecter swipes on hornady 140gn ammo and duplicate reloaded ammo. I also get primer flow around the firing pin. I know if i reduce the load by .5gn the problems go away. i tried slash heavy buffers ans springs with no help.

Are you sure about the COAL of 2.815? If true then 140AMAX wont fit in DPMS mags anymore.

Im shooting 41.5 H4350 140 AMAX out of a 24in 6.5 creedmoor DPMS LR type. i get ejector swipes and primer flow on that recipe and hornady factory ammo. using some ones crono i got 2660 AVG from my gun.

that BCG looks to be a DPMS style .308. so that pin holds the firing pin in the carrier. just push out the pin from the sloted side.

Well if you dont want to screw it up, then i would not change the buffer tube length, spring, and weight at all. Any changes to those parts will change the timing of the action. Why do you want to get an adjustable stock? Do you want to change the length of pull? check Luth AR, Magpul PRS for...

I load to 2.810 in my 10 round dpms steel mags. The steel mags have a flat front vs the rounded front of the pmag so I can load a little longer.

Well since savage stopped making the FCPK and the rest of the nice model 10's. Anyone know about any new models coming out of savage?

So i have been prone shooting my LR308 pattern 6.5 creedmoor with an A2 buttstock. After 40 rounds my collar bone hurt so bad my accuracy was hurting. Anyone know of a new recoil pad that replaces the plastic cheese grater plate?

Im looking for the same requirements. Any comments or comparisons of the recoil pad versus a stock A2?

That a chunck of brass removed from the case is completely normal. Take a look at you brand new extracter. see how sharp the edges are and how strong the spring is? Not to mention the part is made of steel and steel wins over brass. This problem will get better as the extractor gets worn down a...

I have the same problem, my shells have an ID of .260 after sizing and my bullets are .264. So my jackets are scraping off even on chamfered cases necks.

I adjusted the gas down until the gun would not lock back on the last round, then turned it up one click.

So I just got my SLR adjustable gas block working and that didn't solve my ejector swipes. So Im going to get a heaver buffer to delay the bolt opening. I have a LR308 DPMS pattern chambered in 6.5 Creedmoor using an A2 buttstock. I am currently using a DPMS LR308 buffer weight and spring...

Oh wow, i was eyeing a .308 10FCP-K, crap.

I know 140gr Amax ammo has shown problems in some Semi auto creedmoor, but have or can you try some Hornady 140gr amax factory ammo?

So before seating a bullet the outer diameter of the neck was 0.288. After seating the bullet, the neck is 0.291. I had to pull 3 rounds, 1 bullet had the jacket striped off on one side, the second one had scrape marks on the bullet. the last bullet was fine. I have noticed when making my...

Can you make a longer barrel version or have a overall length of 30 inches for the poor people in california please.

I have been reloading for my semi-auto DPMS pattern AR, 24in Fulton Armory. when i need to pull a bullet, it takes 10 wood deforming strikes on the hammer. I am also having increasing ejector swipes. I am using the Hornady Custom Grade New Dimension 2-Die Set 6.5 Creedmoor and hornady brass...

Have you tried Hornady 120 and 140gr retail ammo?

bobke: Does your Fulton barrel fire hornady 140 Amax factory or reloads without primer problems?