Search results

BTT

In my experience the most complete and nicest looking crimp removal is done by the LE Wilson Reamer. Cuts the crimp out completely, leaves a nice rounded taper for easy primer insertion and doesn't scar up the pocket walls. Needs to be used with the BMG case tools, cannot be used freehand...

Looking for a Barrett M82A1 brake - current configuration, part #82159-2, with screws and washers if you have them. Send PM with price and pics please.

Wipe-out foaming bore cleaner, and add eliminator if there's lots of copper. Doesn't hurt to run a bore brush thriught a few times to rough up the surface beforehand.

You don't want it any tighter than necessary to keep it in place, compressing the barrel near the muzzle might mess with your accuracy.

It's what's in the box that needs to be verified. You'll have to see the scope itself to look for fake characteristics. If you can't get the seller to open the box, see if they can produce a receipt tying the scope purchase to a reputable dealer.

Looks like it fired out of battery, stuck firing pin or high primer maybe? Lucky to have only blown out the ejector.

GA Precision is fairly caught-up, give Ken or Dustin a call. 816-221-1844 ext. 6

Sounds like your chamber is shorter than the minimum headspace that your dies will size to. You can take a standard shell holder and grind/machine down the die contact surface until you get shoulder contact or you can shorten your sizing die slightly. I would go with the shell holder first...

Re: Defiance mis-firing. Anyone else had this issue? Make sure the cocking piece isn't dragging on the sides of the trigger housing. If the trigger or trigger pins are a tight fit it can cause binding.

Re: Best hunting 7mm-08 bullet for 18" barrel I use the 139gr SST and Varget in my 20" 7mm-08

Re: Cant Hold a Group!!!! Have you adjusted the parallax for 200 when you move to that range? The reticle moving around from improperly adjusted parallax could give the symptoms you describe.

Re: Anyone use defiance machine actions? Fit and finish are second to none, a significant number of options available to customize your action and left hand shooters don't take a back seat like everywhere else. Glen Harrison is excellent to work with, you won't be disappointed.

Re: Drill bit source Enco has a decent selection with regular promo code specials. Check the sales flyers on the home page first. use-enco.com

Re: Question for the firearm refinishers Try greasing the slot and sight before assembly, it may prevent the finish from transferring.

Re: 208 A Max 300 WM favorite powder 76gr H1000 with a CCI250 works well for me.

Re: Revolver rebarrel question PM sent with a simple solution

Re: 700 extractor shaving the rims of brass? Clean inside your bolt nose recess on the barrel, looks like there could be some debris combined with the brass making an odd round tight. Could also be the bolt nose contacting the barrel unless you can explain those cylindrical scrapes on the...

Re: Malicious Virus detected Same here, site trojans being blocked by norton

Re: Best salesman ever It was purple 10 years ago with the same sales pitch!