Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Watch Out for Scammers!
We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!
Planning a build and starting to gather info on my options. Was heavily leaning towards a McMillan stock but they don’t offer inletting for anything but the target rifles. I know years ago that CDI would offer to inlet whatever stock you had for their bottom metal but since they shut down I...
Gents, I have a McM A5 that is cut for stnd. Rem S/A - would like to upgrade my set-up to the Seekins BM. I know some smithing of the stock is necessary and I'm pretty sure it is not something I could/should attempt myself(maybe I'm mistaken). Either way I may go ahead and have the stock bedded...
I recently bought the Badger detachable magazine system for a Remington 700 I have used up until now with a hinged floor plate. I use a B&C tactical stock with a aluminum bedding system that is installed from the factory. Is there a logical reason to utilize the two pillars that came from...
Hey guys, Just snagged a badger action and sold my rem700 barreled action. The mcmillan stock is inletted for the SA 700. How involved is the fitting of the badger action to this stock? Any help is appreciated.
Anyone know of an outfit or gunsmith out there who inlets B&C Medalist stocks for any of the popular detachable mag systems? (HS, Badger, Seekins, Surgeon). I'm interested in an inlet for the Remington 700 action. I figure with B&C's aluminum bedding block it would require more than a hand job...
I've got a Model 12VLP with the laminate stock in .308. Has the factory fluted varmint profile barrel. I may be buying a .223 barrel off of a Model 10 Heavy Barrel rifle. Will I have to inlet to stock to make this barrel fit? Paul
I just got my new B&C stock in, I have a Seekins bottom metal on order and should be here in a couple of weeks. this gives me time to find someone to Inlet my stock when the bottom metal gets here. I'm looking to find someone in the Dallas/Fort Worth area, Texas that is. anybody got any ideas?
The Badger LA receiver is on the way, the AICS is set up for it/machined out by Badger. Anyone have a template or guide for fitting a CG Jackson trigger into this set up? thanks!
Bought some used metal from a member and inletted it to my 5R stock. It was ~1/4" longer in the front to I needed to extent that area of the stock and widen the rear of the mag well area just a bit. It slips in nicely and seems to sit on the pillars well. Torqued the metal down just as with...
Been getting a lot of calls and e-mails with questions on what we can inlet for, so I thought I would bring all you guys up to speed at once. For the aftermarket DBM floorplates we have programming for the following: Badger M5 DBM, long and short. Seekins DBM, long and short...