• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

lr308

  1. StealthOwl

    Accessories Sold: BNIB Aero Precision M5 .308 BCG, Nitride

    BNIB, Sold!
  2. Dvando20

    Rifle Scopes KAC M110 Mount. Real or Fake?

    PLEASE READ ENTIRE POST! Need thoughts! I purchased a brand new Knights Armament M110 one piece 30mm scope mount for my AR10. I bought it from Kosher Surplus. It came brand new in the Knights box. Today I was finally mounting up my scope, and using the KAC directions to a T, the first screw head...
  3. Dvando20

    SASS barrels, any still kicking around?

    Trying to find a DPMS SASS .308 barrel for my current project. I know they were all over the place a few years ago but now i can't find a single one.
  4. Dvando20

    WTB WTB: DPMS LR308 Barrel

    Looking for a factory DPMS .308 SASS barrel or an OEM .308 bull barrel for my slick-side LR308.
  5. Dvando20

    WTB DPMS LR308 lower in Mass!

    Looking to buy a DPMS LR308 lower in the state of Massachusetts, private sale only, all MIRCS laws and regulations apply. Can be stripped, partial or complete. I have plenty of parts. Just too many hoops to jump through right now to buy out of state. Trying to complete an OEM rifle.
  6. Dvando20

    Accessories WTB: DPMS LR308 sportical quadrail

    Looking to find an original factory DPMS LR308 Sportical (Ultra high top) 12.5" quad rail hand guard. Can be seen in the discontinued listing on Midway in the picture. Can't find one for sale, let alone a pic of a rifle with one on it. Hope somebody out there has one laying around.
  7. D

    Thank you - solved LR308 problem

    Found this forum while looking for solution of 308 not cycling after shot. Great suggestions in the old thread ranging from buffer springs, lubrication, testing methods, etc. Gave me courage to disassemble my DPMS build to solve problem. Could not find problem until I checked the gas block and...
  8. Dvando20

    Accessories ISO: DPMS LR308 bull barrel

    I am looking for an original 24" DPMS 308 bull barrel for my slick side upper. Other brands are an option, but would like to stay with DPMS to keep it all one brand.
  9. Dvando20

    Firearms ISO DPMS LR308 bull barrel

    I am looking for an original 24" DPMS 308 bull barrel for my slick side upper. Other brands are an option, but would like to stay with DPMS to keep it all one brand.
  10. K

    Help with CMMG accuracy expectation

    Hello, I need some solid advice regarding my expectations and options to deal with my CMMG CBR .308 accuracy. As it sit now, I have a stock CMMG CBR .308, the 2013 version with SureFire Break. It has an ADM Recon mount, and Bushnell ERS 6-24. The upper and lower have a great fit, and the...
  11. B

    Rifle Scopes Wonder Optics + LR-308: which rings?

    I just picked up this fine LR-308 tonight and I have a 10x WOTach Gen 4 coming in soon. I was going to put the WOTach on my starter Remington 700, but that can wait. I'm looking at the different Burris Xtreme's for the scope but I can't really tell which size I should get for the LR-308. I'm...
  12. Strangedays

    Range Report LR-308 Ammo question

    I took my rifle out shooting today and tried some 7.62 ammo by American Tactical which is made in turkey.The rifle is a DPMS LR-308 The problem was it would not have enough pressure to operate the bolt so the rounds I had to rack back every shot. Anyone had this problem? I have shot Nato through...
  13. V

    Armalite AR-10 or DPMS LR-308?

    I am looking to build an accurized AR-10 type rifle in .260 Remington. Should I build it on the Armalite AR-10 platform or the DPMS platform. I know that the two will not interchange mags but is one really better than the other? I noticed that GAP builds their precision AR-10 on both platforms...
  14. smith934

    DPMS LR308 - Initial Sight In & Break In ?

    I bought a new DPMS LR308 and I'm going to the range this weekend. I have a large quantity of 7.62 surplus ammo (Port, Hirtenberger and Radway Green) and am wondering if it would be ok to use it for the initial sight in and for barrel break in. Any recomendations would be appreciated.
  15. C

    Gunsmithing dpms lr-308 triggers

    can anyone tell me what triggers will fit an lr-308 lower and possibly recommend one. thx steve
  16. A

    MagPul LR308 mags

    Looking for reviews on the MagPul .308 magazines.. I have some of them on the way.
  17. beenjammin

    Rifle Scopes Best 1 piece scope mount for a GAP DPMS LR308

    I have a badger riser rail with some m40A30 rings on it at the moment and there is not enough clearence for lens covers left on a 50mm obj. I would like a 1 piece set up like the larue, but doe the larue have any MOA built in to the mount? also would an AI picatinny mount work? or armalite 1...
  18. mattsnuked

    Gunsmithing DPMS LR308 feeding problems

    Well I have had my DPMS LR308 for a week now and have taken it out to the range twice. I like the rifle BUT I have an issue with it. On only the 3rd and 2nd to last round in the mags when the bolt goes to cycle it skips over the head of the round, starts feeding the round by grabbing the body...
  19. K

    Gunsmithing Smith to assemble DPMS LR308 bbls

    I have parts to build up several DPMS LR308s and am in need of a smith to turn the bbls, chamber, drill the gas port, install the bbl extension, and all related headspacing. I know GAP is not taking work like this until August and imagine there are other smiths out there that are used to doing...
  20. Bigwheels

    150gr Balistic tip in DPMS LR308?

    I was wondering if anybody has had any problems running tipped bullets in thier DPMS/AR-10 auto's? Do the tips break off or something? Thanks.