• Watch Out for Scammers!

    We've now added a color code for all accounts. Orange accounts are new members, Blue are full members, and Green are Supporters. If you get a message about a sale from an orange account, make sure you pay attention before sending any money!

300 PRC update

Question for you all on H1000 loads behind a Berger 215 Hybrid Target.

I recently had a 300 PRC built (Borden Action, Lilja 25” Barrel 1:9 twist. Using ADG brass.)

I called Berger for recommended min/max load data. They said for the 215 min is 80.0 and max is 84.1 gr H1000.

To me, this seems very high. Their min is above the max published by Hornady for both the 212 and 220 gr bullets. I’ve read through most of the 68 pages of posts here...thanks for all the info!! And seems like most of you using H1000 with Berger 215 are ending up in that 78-79gr range. I don’t know that I’ve seen a single post here trying anything above 81gr.

any input is greatly appreciated!!!
 
$299.99 for 8lbs
13.55 shipping
11.99 hazmat
19.53 Tax

So... $346.00 with a 94 cents round up.....bleh....no thanks

I just bought an 8 lb jug of 565 from Grafs (thanks for tip Steel Head!) for $330.42 delivered. We now have 14 pounds of N565 and should be ready to get through the rest of the year. Now I need to make good use of this boner.
 
  • Haha
Reactions: Steel head
I’ve been lurking here for awhile. Tons of good info in this thread. I’ve been paying particular attention to the hand loads. Hopefully I can get some range time to see what my new rifle can do. Bergara Wilderness transplanted into a MTD ESS chassis. Milled out the base section to still run the 3.850 mags. Vortex Viper pst gen 2 5-25. Atlas bipod. It’s been fun putting together, now for some range time!
 

Attachments

  • 3F1F709C-F5BF-4F04-9569-945B2621C78C.jpeg
    3F1F709C-F5BF-4F04-9569-945B2621C78C.jpeg
    556.3 KB · Views: 108
  • 51870728-83A2-4933-8227-41699F3809AB.jpeg
    51870728-83A2-4933-8227-41699F3809AB.jpeg
    540.1 KB · Views: 152
  • Like
Reactions: TripleBull
Question for you all on H1000 loads behind a Berger 215 Hybrid Target.

I recently had a 300 PRC built (Borden Action, Lilja 25” Barrel 1:9 twist. Using ADG brass.)

I called Berger for recommended min/max load data. They said for the 215 min is 80.0 and max is 84.1 gr H1000.

To me, this seems very high. Their min is above the max published by Hornady for both the 212 and 220 gr bullets. I’ve read through most of the 68 pages of posts here...thanks for all the info!! And seems like most of you using H1000 with Berger 215 are ending up in that 78-79gr range. I don’t know that I’ve seen a single post here trying anything above 81gr.

any input is greatly appreciated!!!
I loaded about 79.0 h1000 and 215 hybrids, made about 2980 fps.
Hornady brass tho... was very accurate for me, shot 900 of em 😀
 
  • Like
Reactions: Whiskeydog
Question for you all on H1000 loads behind a Berger 215 Hybrid Target.

I recently had a 300 PRC built (Borden Action, Lilja 25” Barrel 1:9 twist. Using ADG brass.)

I called Berger for recommended min/max load data. They said for the 215 min is 80.0 and max is 84.1 gr H1000.

To me, this seems very high. Their min is above the max published by Hornady for both the 212 and 220 gr bullets. I’ve read through most of the 68 pages of posts here...thanks for all the info!! And seems like most of you using H1000 with Berger 215 are ending up in that 78-79gr range. I don’t know that I’ve seen a single post here trying anything above 81gr.

any input is greatly appreciated!!!
GRC agrees with you, but QuickLoad finds lower pressures and I think that is where Berger load data is coming from. I wouldn't push it.
 
GRC agrees with you, but QuickLoad finds lower pressures and I think that is where Berger load data is coming from. I wouldn't push it.

Thank you! I will be starting lower than Berger’s min for sure. They did say that it was from Quickload and that they haven’t actually pressure tested any of that data.
 
GRC agrees with you, but QuickLoad finds lower pressures and I think that is where Berger load data is coming from. I wouldn't push it.

Not to mention it's ADG brass vs. Hornady. 80-84 gr is more like Retumbo ranges than H1000. The Hornady load data for 212s give a range 70.1 to 78.1 gr of H1000. The smaller case volume of the ADG brass would take this even lower. I would start on the lower end of that range and work up.
 
Not to mention it's ADG brass vs. Hornady. 80-84 gr is more like Retumbo ranges than H1000. The Hornady load data for 212s give a range 70.1 to 78.1 gr of H1000. The smaller case volume of the ADG brass would take this even lower. I would start on the lower end of that range and work up.
That’s a good point. I haven’t done anything with the case volume in quickload or GRC yet. Only fifteen rounds through this guy now.
 
I fireformed 30SM with 77.5gr H1000 behind a 215 hybrid. Based on downrange shot marker velocity I was around 2950. On a fresh barrel
 
Anyone reloading 300 PRC on a Dillon 550? Trying to determine what shell plate conversion I’ll need. Would it be:
#B Shellplate - # 13347
#6 Locator Button - # 15755
since the parent case is the .375 Ruger?
 
Anyone reloading 300 PRC on a Dillon 550? Trying to determine what shell plate conversion I’ll need. Would it be:
#B Shellplate - # 13347
#6 Locator Button - # 15755
since the parent case is the .375 Ruger?

I’m using the 300WM kit. With 230 Hybrids & Whidden dies I have to leave the pin out of the seating station and remove the round after seating. The round is too long, the tip remains in the die once seated.
 
A little late in the game for testing....but I have a 1 mile and 1000yd tactical comp next weekend. My current loads were giving me too much vertical stringing. Some of that was self induced with fundamentals and I'm working on that. However, I did some quick load development mainly based on neck tension, OAL, and gasp....full length resizing.

First....I'll apologize and say Eric Cortina is not full of shit. At the end of the day my full length sized brass....prepped my way...with 2 thou shoulder bump back....shot much better than my current load or other loads I tested that were neck sized only....both in group and SD measured by MagnetoSpeedV3.

New total round count for barrel is 1034. Powder is Vihtavouri N565. Bullet is Hornady A-Tips 230 grain. OAL is now 3.850. Full length resized with a 2 thou shoulder bump. 2 thou of neck tension and bullets seated with LE Wilson arbor press dies and K&M Arbor Press. All brass freshly annealed. Primer was FGMM 215M's.

Best 5 shot group

Max speed of group was 2952
Min speed of group was 2939
AVG speed of group was 2946
Standard Deviation of 5.7fps

I'll take that on a barrel that has 1000+ rounds of magnum through it.

These shot the best group of the day at 100yds with a size of 0.34".

I had some groups that were 1.1" and you couldn't really call any of them 'the flyer'...like a shotgun pattern.

Most batches had a SD around 7.5fps...and most shot 0.60" or about.

One batch had a SD over 12fps....that was the one that shot the 1.1" group.

After next weeks event....time to rebarrel I guess...but I may be forced to use it a bit longer due to both finances and wait time on work to be done.
 
  • Like
Reactions: b6graham
A little late in the game for testing....but I have a 1 mile and 1000yd tactical comp next weekend. My current loads were giving me too much vertical stringing. Some of that was self induced with fundamentals and I'm working on that. However, I did some quick load development mainly based on neck tension, OAL, and gasp....full length resizing.

First....I'll apologize and say Eric Cortina is not full of shit. At the end of the day my full length sized brass....prepped my way...with 2 thou shoulder bump back....shot much better than my current load or other loads I tested that were neck sized only....both in group and SD measured by MagnetoSpeedV3.

New total round count for barrel is 1034. Powder is Vihtavouri N565. Bullet is Hornady A-Tips 230 grain. OAL is now 3.850. Full length resized with a 2 thou shoulder bump. 2 thou of neck tension and bullets seated with LE Wilson arbor press dies and K&M Arbor Press. All brass freshly annealed. Primer was FGMM 215M's.

Best 5 shot group

Max speed of group was 2952
Min speed of group was 2939
AVG speed of group was 2946
Standard Deviation of 5.7fps

I'll take that on a barrel that has 1000+ rounds of magnum through it.

These shot the best group of the day at 100yds with a size of 0.34".

I had some groups that were 1.1" and you couldn't really call any of them 'the flyer'...like a shotgun pattern.

Most batches had a SD around 7.5fps...and most shot 0.60" or about.

One batch had a SD over 12fps....that was the one that shot the 1.1" group.

After next weeks event....time to rebarrel I guess...but I may be forced to use it a bit longer due to both finances and wait time on work to be done.

I am doing a lot of what he is saying to do and find that Eric's advise is usually on point. With the seating depth, and the sizing and etc. Happy he's putting out the content, the guy obviously know's what he is doing.

Hm good to know you seem to be getting flyers at 1000 rounds.I am at 600 rounds. So I will probably run another 300 rounds of practice. And then rebarrel for the next years NF ELR Match.
 
  • Like
Reactions: b2lee
@Mk32784 Next year?....we still got tons of stuff to do THIS year :) I'm still looking forward to going to 2700yards next month.... I think I can do 3000 holding over in the reticle....we'll see.

I'm sure @Steel head will talk me into getting a Charlie Tarac by then.

Gotta have a goal. Plenty of practice and shooting to do before then.

I hit 2700 with mine using the recital to hold over. Looking at getting the NF Prism for more ELR funs.
 
  • Like
Reactions: b6graham and b2lee
Question for you all on H1000 loads behind a Berger 215 Hybrid Target.

I recently had a 300 PRC built (Borden Action, Lilja 25” Barrel 1:9 twist. Using ADG brass.)

I called Berger for recommended min/max load data. They said for the 215 min is 80.0 and max is 84.1 gr H1000.

To me, this seems very high. Their min is above the max published by Hornady for both the 212 and 220 gr bullets. I’ve read through most of the 68 pages of posts here...thanks for all the info!! And seems like most of you using H1000 with Berger 215 are ending up in that 78-79gr range. I don’t know that I’ve seen a single post here trying anything above 81gr.

any input is greatly appreciated!!!
No pressure signs at all with ADG brass and 26” proof carbon
 

Attachments

  • A9731179-AA2B-4A1D-A3E7-D729D38E1038.jpeg
    A9731179-AA2B-4A1D-A3E7-D729D38E1038.jpeg
    237 KB · Views: 240
  • A89C8882-CD1B-4180-872D-8857938B1717.png
    A89C8882-CD1B-4180-872D-8857938B1717.png
    959 KB · Views: 233
  • Like
Reactions: TripleBull
@DellaDog that barrel will start speeding up just a bit over the next 50 rounds or so. What did you use to measure velocities? I keep wanting to rezero my rifle because I'm shooting high...then realize...duh...I have a MagnetospeedV3 on the end and the shots are deflecting high. After next weekend I'll have over 1100 rounds down the barrel....I'll go shoot a few 5 round groups to measure muzzle velocity and then grouping....this thing can't last that much longer as a competitive ELR barrel.
 
Labradar. I shot the first 25 rounds at 76 grains and watched the speed build from mid 2800 (2840) to 2900.
Took the next 25 and shot 77,77.5, and 78 to see what speed it liked & about where they plotted.

It's just a test to guess where it'll like speed wise. And I'm guessing low 2900, regardless of the charge that gets me there.
76 & 77 were close to 2900 & plot similarly - and an obvious scatter at 78.
I'm plotting speed really, not charge weight at this time.
(I add 3 clicks and aim at the cross hair diamonds to print in the center circle.)
 
It's amazing that awe can say 'low 2900' all casually with a 230 grain bullet...I really do love this cartridge. I'll be pushing most of mine over 3000fps to a mile target next weekend... 230 A Tips...and then surely...surely this barrel is toast.
 
  • Like
Reactions: DellaDog
Just got some n565. 70gn a good starting point? Also what’s people seeing for max load? 230gn Berger. I want an idea of where to stop. I hate pulling bullets.
 
Just got some n565. 70gn a good starting point? Also what’s people seeing for max load? 230gn Berger. I want an idea of where to stop. I hate pulling bullets.

I ran a ladder from 76.0 to 77.8 grains of VV N565 without pressure signs, then an OCW from 77.2 to 78.4 grains, still with no pressure signs.

ChargeMVSt DevES
77.2​
2937.7​
8.7​
10.0​
77.4​
2951.3​
3.1​
6.0​
77.6​
2965.8​
12.0​
31.0​
77.8​
2973.7​
5.1​
11.0​
78​
2982.7​
1.5​
3.0​
78.2​
2992.7​
5.1​
10.0​
78.4​
3005.7​
2.1​
4.0​

But your gun will be different so follow the usual rules, start low, progress cautiously. See here:

 
I ran a ladder from 76.0 to 77.8 grains of VV N565 without pressure signs, then an OCW from 77.2 to 78.4 grains, still with no pressure signs.

ChargeMVSt DevES
77.2​
2937.7​
8.7​
10.0​
77.4​
2951.3​
3.1​
6.0​
77.6​
2965.8​
12.0​
31.0​
77.8​
2973.7​
5.1​
11.0​
78​
2982.7​
1.5​
3.0​
78.2​
2992.7​
5.1​
10.0​
78.4​
3005.7​
2.1​
4.0​

But your gun will be different so follow the usual rules, start low, progress cautiously. See here:


What are your barrel specs again? I've got a few pounds inbound that I'm going to play with.
 
Just picked up a couple jugs of RL26 to try alongside H1000. I’m guessing back off a couple grains? Maybe 74.4 vs 76 for H1000 & 230 Hybrid?

Sure hope the rumors of it going to shiite above 85* are false. 85* is a cool summer day here in TX.
 
Just picked up a couple jugs of RL26 to try alongside H1000. I’m guessing back off a couple grains? Maybe 74.4 vs 76 for H1000 & 230 Hybrid?

It depends on what you're trying for. You should be well within acceptable limits, but 74.4 is probably going to get you more than what 76 of H1000 will get you. The load data (at least the sheet I've got) from Hornady is off (to the fast side) on the RL-26 fps estimates. I use 73.4 gr in my 28" Bartlein to get me ~2865 fps. A friend used 74.8 to get about 2900 fps out of a 26" barrel. If you want to bruise your brass and run it like a banshee (like @b2lee does) then you can get to the upper 2900s.

Sure hope the rumors of it going to shiite above 85* are false. 85* is a cool summer day here in TX.

I don't see that. Breaking in my new 300 PRC a couple weeks ago, I was running 73.0 gr and getting 2850 or so in 95 degree heat.
 
Just picked up a couple jugs of RL26 to try alongside H1000. I’m guessing back off a couple grains? Maybe 74.4 vs 76 for H1000 & 230 Hybrid?

Good plan. Based on other rifle data, I set up a ladder from 76.0 to 77.8 of RL26. I got mild ejector swipe and primer flattening and stopped the ladder test at 76.8.
 
  • Like
Reactions: DellaDog
I have 20 pieces of 8x fired Hornady brass that actually still pass the primer pocket gauge...but won't after Friday. I'll practice some for the 1 mile GBA Nationals and the 1000yd Tactical Division......put a few rounds down range.....I've only ever popped one primer at the loads I'm running. I doubt the primer pockets will pass the gauge on the next check with a load that may push 3000fps with a 230 A-Tip. This week I've prepped my brass better than anything I've ever prepped before. I've weighed everything down to .02+/- grains.....I've volume measured all brass....annealed....every primer pocket is uniformed....deburred....every bullet measured 6 ways from Sunday.

Thus...when I do poorly...it will be on me :) Actually....I don't expect to do too well with almost 1100 rounds on the barrel once the record targets will be shot. But I will have fun...no doubt.
 
I ran a ladder from 76.0 to 77.8 grains of VV N565 without pressure signs, then an OCW from 77.2 to 78.4 grains, still with no pressure signs.

ChargeMVSt DevES
77.2​
2937.7​
8.7​
10.0​
77.4​
2951.3​
3.1​
6.0​
77.6​
2965.8​
12.0​
31.0​
77.8​
2973.7​
5.1​
11.0​
78​
2982.7​
1.5​
3.0​
78.2​
2992.7​
5.1​
10.0​
78.4​
3005.7​
2.1​
4.0​

But your gun will be different so follow the usual rules, start low, progress cautiously. See here:


RCC brass? That’s what I have. Just waiting on my 30” Bartlein barrel to get here
 
In the morning I'll make the 3.5 hour trek up North to TVP and shoot in the GBA Nationals. It will be interesting to see how competitive I can be with almost 1100 rounds on this 300PRC Bartlein barrel. Very interested in what my vertical stringing will be at 1 mile....and if I can repeat a 5" group in the 1000yd Tactical Division. Weather is probably going to suck due to the passing hurricane left overs....but we'll all be shooting in the same conditions.

At least I got a reservation for a king size bed and hot hot shower to wash away the failure.
 
This is my first post so go easy! I wanted to share my info because you all were very helpful to me with your information.
I needed a lightweight precision rifle that was rock solid for tortures of elk hunting, in a caliber that was stable for long range. So...started buying parts. Below is list:
Manners EH1
Lone Peak Fuzion Ti
Proof Research Sendero 20”
Triggertech Diamond
Hawkins Precision Oberndorf
TierOne tactical bipod (cf)
TierOne rings
Kahles K525i
Built by DMR LLC
Thing is shooting match hornady 225gr factory loads at 2840fps.

507FB219-14D5-4C1D-80F4-B4699F82628C.png

076B16E9-94AB-46DE-9C81-23F55939A3EB.jpeg

72CFBE21-B98B-413A-941E-706927694194.jpeg
 
N565 76gr slight compression // 0.002” NT // 0.03” off lands // BR2 // RCC // 230 HT // MV 2954 // SD 8.22 // 88 degrees // 28.51inHg // 56%
30” Bartlein 8 twist Omega300

AA195984-6B0B-4B35-9020-D5DCAA8827FB.png
 
This is my first post so go easy! I wanted to share my info because you all were very helpful to me with your information.
I needed a lightweight precision rifle that was rock solid for tortures of elk hunting, in a caliber that was stable for long range. So...started buying parts. Below is list:
Manners EH1
Lone Peak Fuzion Ti
Proof Research Sendero 20”
Triggertech Diamond
Hawkins Precision Oberndorf
TierOne tactical bipod (cf)
TierOne rings
Kahles K525i
Built by DMR LLC
Thing is shooting match hornady 225gr factory loads at 2840fps.

507FB219-14D5-4C1D-80F4-B4699F82628C.png

076B16E9-94AB-46DE-9C81-23F55939A3EB.jpeg

72CFBE21-B98B-413A-941E-706927694194.jpeg
20 inch barrel...whoa! And I thought I was short at 21".
If I'm not mistaking, you're the new shortest.
Unless someone has an 18"?